Car and Driver INTELLIDASH PRO S Manual de usuario
User Manual
Manual de Usuario
INTELLIDASH PRO S
DU2000
Table of Contents
READ ME..........................................................................................2
PACKAGE LIST.................................................................................3
PRODUCT OVERVIEW..................................................................4
SET-UP MOUNT & POWER ON.................................................5
IMPORTANT NOTES.....................................................................8
HOME SCREEN...............................................................................9
APPLE CARPLAY...........................................................................10
ANDROID AUTO .........................................................................14
iOS MIRROR...................................................................................17
ANDROID LINK.............................................................................18
BLUETOOTH PHONE...................................................................19
BLUETOOTH MUSIC...................................................................20
USB MEDIA.....................................................................................21
FM TRANSMITTER......................................................................22
BUILT-IN SPEAKER.......................................................................23
SETTINGS.......................................................................................24
TROUBLESHOOT FIRMWARE..................................................25
SUMMIT ELECTRONICS LLC ONE YEAR LIMITED
WARRANTY...................................................................................27
ENGLISH
Read Me
Important Safety Instructions
Read these instructions, keep these instructions, heed all warnings, follow
all instructions.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for Help.
The device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC NOTICE TO USERS:
FCC ID: 2AMSOCAD-DU2000
Caution: Changes or modifications not expressly approved by the Party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection Against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications, however there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o ffand on, the user is encouraged to try to correct
the interference by one or more of the following:
1) Do not use this apparatus near water.
2) Clean only with a dry cloth.
3) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
4) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
5) Protect the power cord from being walked on or pinched, ensure that the
power cord does not get tangled with the gas or break peddles.
6) Only use attachments/accessories specified by the manufacturer.
7) Unplug this apparatus during lightning storms or when unused for long
periods of time.
8) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Box Contents
EN 3
INTELLIDASH PRO S
Shock Absorbing
Gel Strip
3M Adhesive Disk
Type C - Type C
cable
AUX Cable
User Manuals
Power Cable
Cable
Clips
Cable
Straps
Mount
Product Overview
EN 4
2. AUDIO OUT Jack
3. USB Type-C connector
4. USB Port
5. Reset button
6. DC 12V Power port
7. Display
9. Knob
8. Mounting hooks
10. Lock
11. Adhesive Suction Cup
12. Power Plug
1. AV IN(For Optional Back Up
Camera, not available in all regions)
1. AV IN (For optional backup
Camera, not available in all regions)
1
2
3
4
5
7
6
8
2. AUDIO OUT Jack
3. Type-C Connector
4. USB Port
(Only for USB Stick, not for charging)
5. Upgrade button (For firmware update use)
6. DC 12V Power port
7. Microphone
8. 7-inch IPS touch Display
9. Power Plug
10. Mounting hooks
11. Knob
12. Lock
13. Adhesive Suction Cup
9
10
11
12
13
EN 5
Set-Up Mount & Power On
Step One
Insert the adhesive suction cup mount into the bracket on the
back of the INTELLIDASH PRO S and slide it up to lock it in place.
Remove the protective film from the adhesive suction cup on the
bottom of the mount. Then press the suction cup onto your dash-
board and push the lock down to secure it in place. Adjust the
INTELLIDASH PRO S’s angle and height so that it does not block
your view of the road, and tighten the knob to secure it in place.
Step Two
Lock
Open Lock
Closed
Tighten
Knob
If you find your INTELLIDASH PRO S is rattling and/or coming
into contact with your dashboard, use the Shock Absorbing
Gel Strip to protect your INTELLIDASH PRO S and dashboard.
Just remove the plastic film from both sides, and place it on
the bottom of your INTELLIDASH PRO S, or on the dashboard
directly below it.
Step Three
Smooth side sticks your
INTELLIDASH PRO S
Textured side sticks your car
EN 6
Step Four
Connect one end of the supplied power cable to the DC 12V
power port of the device.
You can secure your cable between the edge of the windshield
and the dashboard to ensure that it does not become tangled.
Plug the adapter end of the power cable into your car’s DC 12V
power outlet. INTELLIDASH PRO S will automatically power on
when your car is powered on, and will power off when your car
is powered off.
Step Five
EN 7
• Ensure that the INTELLIDASH PRO S is mounted in a place
that does not block your view of the road.
• The INTELLIDASH PRO S has built-in speakers. However,
to play music over your car radio please ensure that the
FM Transmitter function has been set up and is connected
properly with your car radio. (See Page 22)
• Some Android operating versions may not be compatible
with the Android Auto app. As such, we strongly recom-
mend updating your phone’s operating system to the latest
version.
• Ensure that you are using the power cable provided with
the purchase of your phone (or compatible cable) to con-
nect the INTELLIDASH PRO S and your phone.
• Apps displayed on the INTELLIDASH PRO S (when pairing
with either the CarPlay or Android Auto app) will vary de-
pending on the apps available on the connected phone.
• The INTELLIDASH PRO S does not support it’s own GPS.
All Navigation app’s are functionally dependent on the
connected phone.
IMPORTANT NOTES
EN 8
Home Screen
The home screen is used to navigate to all apps on this device.
2021-06-04
1. Home button
2. Date
3. Screen On/Off buttton
4. Day/Night mode button
5. Volume control button
6. USB device status
7. Bluetooth connection status
8. Return button
9. Time
10. Android Auto app
11. Apple CarPlay app
12. Bluetooth Phone app
13. Bluetooth music player
14. USB media player
15. System settings
16. FM Transmitter settings
EN 9
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
