Canon S520 Manual de usuario

QY8-1379-000

REVISION 0



2001 CANON INC. CANON S900/S820/S750/S520 1201 GR 0.30-0 PRINTED IN JAPAN (IMPRIME AU JAPON)

DEC. 2001

122001 GR 0.30-0

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,

maintenance, and repair of products. This manual covers all localities where the products are sold. For

this reason, there may be information in this manual that does not apply to your locality.

Corrections

This manual could include technical inaccuracies or typographical errors due to improvements or

changes in the products. When changes occur in applicable products or in the content of this manual,

Canon will release technical information as the need arises. In the event of major changes in the

contents of this manual over a long or short period, Canon will issue a new edition of this manual

The following paragraph does not apply to any countries where such provisions are

inconsistent with local law.

Trademarks

The product names and company names described in this manual are the registered trademarks of the

individual companies.

copied, reproduced or translated into another language, in whole or in part, without the written consent

of Canon Inc., except in the case of internal business use.

CANON INC.

i Printer Technical Support Dept. 11,21

16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki, Kanagawa 213-8512, Japan

This manual has been produced on an Apple Power Macintosh Power Macintosh 7300/180

computer and Apple LaserWriter II NTX-J laser beam printer; printing films were printed on

Agfa SelectSet Avantra 25. All page layout and illustration data was saved on a YANO 640MO

drive system using NJ 640MO and Mitsubishi MR230MI discs.

Logos and illustrations were created with MACROMEDIA FREEHAND 7.0J. All documents and

page layouts were created with QuarkXPress 3.3 Japanese version.

I. ABOUT THIS MANUAL

This manual consists of four parts containing information for servicing the product.

Part 1: Product Specifications

Product overview and specifications.

Part 2: Troubleshooting

A guide to troubleshooting the product and identifying parts needing replacement.

Troubleshooting solutions are listed according to the error indications displayed by the

status indicator and by problem descriptions.

Part 3: Technical Reference

Block diagrams and information on the hardware's new technologies.

Part 4: Appendix

Pin configurations.

Disassembly and reassembly procedures are not fully covered in this manual.

Refer to the illustrations in the separate Parts Catalog as well.

Product

Specifications Troubleshooting Appendix

Technical

Reference

II. TABLE OF CONTENTS

Page Part 1: PRODUCT SPECIFICATIONS

(S900)

1 - 1 1. PRODUCT OVERVIEW

1 - 1 1.1 Product Overview

1 - 1 1.2 Special Features

1 - 2 2. SPECIFICATIONS

1 - 2 2.1 Printer Specifications

1 - 2 2.1.1 Printer specifications

1 - 3 2.1.2 Printer service life

1 - 3 2.1.3 Print head service life

1 - 4 2.2 Paper Specifications

1 - 4 2.2.1 Paper sizes and weights

1 - 4 2.2.2 Paper types and settings

1 - 5 2.2.3 Printable area

1 - 6 2.3 Print Head Specifications

1 - 6 2.4 Printer and Scanner Drivers

1 - 7 3. PRODUCT CODE LIST

(S820)

1 - 9 1. PRODUCT OVERVIEW

1 - 9 1.1 Product Overview

1 - 9 1.2 Special Features

1 -10 2. SPECIFICATIONS

1 -10 2.1 Printer Specifications

1 -10 2.1.1 Printer specifications

1 -11 2.1.2 Printer service life

1 -11 2.1.3 Print head service life

1 -12 2.2 Paper Specifications

1 -12 2.2.1 Paper sizes and weights

1 -12 2.2.2 Paper types and settings

1 -12 2.2.3 Printable area

1 -13 2.3 Print Head Specifications

1 -13 2.4 Printer and Scanner Drivers

1 -14 3. PRODUCT CODE LIST

(S750)

1 -15 1. PRODUCT OVERVIEW

1 -15 1.1 Product Overview

1 -15 1.2 Special Features

1 -16 2. SPECIFICATIONS

1 -16 2.1 Printer Specifications

1 -16 2.1.1 Printer specifications

1 -16 2.1.2 Printer service life

1 -17 2.1.3 Print head service life

1 -18 2.2 Paper Specifications

1 -18 2.2.1 Paper sizes and weights

1 -18 2.2.2 Paper types and settings

1 -18 2.2.3 Printable area

1 -19 2.3 Print Head Specifications

1 -19 2.4 Printer and Scanner Drivers

1 -20 3. PRODUCT CODE LIST

Page

(S520)

1 -21 1. PRODUCT OVERVIEW

1 -21 1.1 Product Overview

1 -21 1.2 Special Features

1 -22 2. SPECIFICATIONS

1 -22 2.1 Printer Specifications

1 -22 2.1.1 Printer specifications

1 -22 2.1.2 Printer service life

1 -23 2.1.3 Print head service life

1 -23 2.2 Paper Specifications

1 -23 2.2.1 Paper sizes and weights

1 -23 2.2.2 Paper types and settings

1 -23 2.2.3 Printable area

1 -23 2.3 Print Head Specifications

1 -23 2.4 Printer and Scanner Drivers

1 -24 3. PRODUCT CODE LIST

Part 2: TROUBLESHOOTING

2 - 1 1. PRINTER OPERATION

2 - 1 1.1 Printer Operation

2 - 1 1.2 Status Indicator

2 - 2 1.3 Simple Printer Operations

2 - 2 1.3.1 Cleaning operation

2 - 2 1.3.2 Printing the nozzle check pattern

2 - 4 1.3.3 Roller cleaning operation

2 - 5 2. SERVICING

2 - 5 2.1 Before Troubleshooting

2 - 6 2.2 Detectable Problems from System Start to Exit

2 - 9 2.3 Troubleshooting Problems

2 -10 2.4 Troubleshooting Error Indications

2 -13 3. DISASSEMBLY AND REASSEMBLY

2 -13 3.1 Cautions for Disassembly and Reassembly

2 -13 3.1.1 Cautions against ink stains (ink path/ink mist)

2 -13 3.1.2 Damage due to static electricity

2 -13 3.1.3 Deformation of spur tips

2 -14 3.2 Exploded View

2 -15 3.3 Disassembly and Reassembly

2 -15 3.3.1 Carriage lock release

2 -16 3.3.2 Removing and installing tap screws

2 -16 3.3.3 Installing and removing the timing slit strip

2 -17 3.3.4 Handling the encoder film

2 -17 3.3.5 Removing and installing the logic board

2 -18 3.3.6 Removal of red screws prohibited

2 -18 3.3.7 Installing the logic board cover

2 -19 3.3.8 Installing the control ROM cover

2 -20 4. ADJUSTMENTS AND SETTINGS AFTER DISASSEMBLY AND

REASSEMBLY, AND CONFIRMATION OF OPERATION

2 -20 4.1 Adjustments and Settings after Disassembly and Reassembly

2 -20 4.1.1 Items for adjustment (per necessity/locations/tools)

2 -21 4.1.2 If EEPROM settings adjustment is necessary

2 -22 4.1.3 Print head position adjustment

2 -24 4.1.4 Print head seam stripe adjustment (S750)

2 -25 4.1.5 Grease Application

III

Page

2 -26 4.2 Confirmation method

2 -27 5. TRANSPORTING THE PRINTER

2 -27 5.1 Procedure

2 -28 6. PARTS REPLACEMENT, PERIODIC INSPECTIONS, & TOOLS

2 -28 6.1 Periodic Parts Replacement

2 -28 6.2 Periodic Inspections

2 -28 6.3 Tool List

2 -29 7. SERVICE-RELATED FEATURES

2 -29 7.1 Service Mode Operations

2 -30 7.2 Test Printout

2 -32 7.3 Printing the EEPROM Information

2 -34 7.4 Resetting the EEPROM

2 -34 7.5 Waste Ink counter settings (S900/S820)

Part 3: TECHNICAL REFERENCE

3 - 1 1. NEW TECHNOLOGY

3 - 1 1.1 Borderless printing

1.1.1 Borderless printing limitations

3 - 2 1.2 Quiet Mode

3 - 2 1.2.1 Quiet mode limitations

3 - 2 1.3 Remaining-ink amount detection (S900/S820)

3 - 2 1.3.1 Limitations when using the remaining-ink amount detection function

3 - 3 2. CLEANING MODES AND INK PURGE AMOUNTS

3 - 5 3. PRINT MODES

Part 4: APPENDIX

(S900)

4 - 1 1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS

4 - 1 1.1 Logic Board

4 - 4 1.2 Carriage Board

4 - 5 1.3 Print Head

(S820)

4 - 6 1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS

4 - 6 1.1 Logic Board

4 - 9 1.2 Carriage Board

4 -10 1.3 Print Head

(S750)

4 -11 1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS

4 -11 1.1 Logic Board

4 -14 1.2 Carriage Board

4 -15 1.3 Print Head

(S520)

4 -16 1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS

4 -16 1.1 Logic Board

4 -19 1.2 Carriage Board

4 -20 1.3 Print Head

4 -21 2.PROBLEMS LEFT REMAINING

III. ILLUSTRATION INDEX

Page Part 1: PRODUCT SPECIFICATIONS

(S900)

1 - 1 Figure 1 - 1 Printer Exterior (S900)

1 - 3 Figure 1 - 2 JEIDA Standard Pattern

1 - 3 Figure 1 - 3 JIS SCID No. 5

1 - 5 Figure 1 - 4 Printable Area

(S820)

1 - 9 Figure 1 - 5 Printer Exterior (S820)

1 -12 Figure 1 - 6 Printable Area

(S750)

1 -15 Figure 1 - 7 Printer Exterior (S750)

1 -18 Figure 1 - 8 Printable Area

(S520)

1 -21 Figure 1 - 9 Printer Exterior (S520)

Part 2: TROUBLESHOOTING

2 - 1 Figure 2 - 1 Operation Panel

2 - 3 Figure 2 - 2 Nozzle Check Pattern Printout

2 -14 Figure 2 - 3 Exploded View

2 -15 Figure 2 - 4 Carriage Lock Release

2 -16 Figure 2 - 5 Timing Slit Strip

2 -17 Figure 2 - 6 Short-Circuiting the Capacitors

2 -18 Figure 2 - 7 Do not Remove the Red Screws

2 -18 Figure 2 - 8 Installing the Logic Board Cover

2 -19 Figure 2 - 9 Installing the ROM Cover

2 -22 Figure 2 -10 Print Position Alignment Pattern

2 -24 Figure 2 -11 Seam Stripe Adjustment Pattern

2 -25 Figure 2 -12 Grease application

2 -30 Figure 2 -13 Service/Factory Test Printout (Sample)

2 -32 Figure 2 -14 EEPROM Information Printout (Sample)

Part 3: TECHNICAL REFERENCE

3 - 2 Figure 3 - 1 Remaining Ink amount detection

Part 4: APPENDIX

(S900)

4 - 1 Figure 4 - 1 Logic Board

4 - 4 Figure 4 - 2 Carriage Board

4 - 6 Figure 4 - 3 Print Head

(S820)

4 - 6 Figure 4 - 4 Logic Board

4 - 9 Figure 4 - 5 Carriage Board

4 -10 Figure 4 - 6 Print Head

(S750)

4 -11 Figure 4 - 7 Logic Board

4 -14 Figure 4 - 8 Carriage Board

4 -15 Figure 4 - 9 Print Head

(S520)

4 -16 Figure 4 -10 Logic Board

4 -19 Figure 4 -11 Carriage Board

4 -20 Figure 4 -12 Print Head

IV. TABLE INDEX

Page Part 1: PRODUCT SPECIFICATIONS

(S900)

1 - 7 Table 1 - 1 PRODUCT CODE LIST

(S820)

1 -14 Table 1 - 2 PRODUCT CODE LIST

(S750)

1 -20 Table 1 - 3 PRODUCT CODE LIST

(S520)

1 -24 Table 1 - 4 PRODUCT CODE LIST

Part 2: TROUBLESHOOTING

2 -10 Table 2 - 1 ERROR INDICATIONS

2 -21 Table 2 - 2 EEPROM SETTINGS WHEN REPLACING THE INK ABSORBER

Part 3: TECHNICAL REFERENCE

3 - 3 Table 3 - 1 CLEANING MODES

3 - 5 Table 3 - 2 PRINT MODES

Otros manuales para S520

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de Canon

Canon

Canon MX470 Manual de usuario

Canon

Canon BJC-4200 Color Bubble Jet Manual de usuario

Canon

Canon imagePROGRAF iPF 755 Manual de usuario

Canon

Canon imageClass LBP6030w Manual de usuario

Canon

Canon CP-10 Manual de usuario

Canon

Canon PIXMA G3070 Series Guía de configuración

Canon

Canon PIXMA TR4520 Guía de configuración

Canon

Canon imagePROGRAF iPF9400S Manual de usuario

Canon

Canon LBP7010C Manual de usuario

Canon

Canon MP282 Manual de usuario

Canon

Canon imagePROGRAF iPF825 MFP Basic Guide No.1 Manual de usuario

Canon

Canon iR2016J Manual de servicio

Canon

Canon iP4600 - PIXMA Color Inkjet Printer Manual de usuario

Canon

Canon IR 2420 Hoja de información del producto

Canon

Canon imagerunner advance 8205 Manual de usuario

Canon

Canon PIXMA MX392 Instrucciones de uso

Canon

Canon PIXMA MX860 series Instrucciones de uso

Canon

Canon PIXMA MG3140 Manual de usuario

Canon

Canon MAXIFY MB5020 Manual de usuario

Canon

Canon BJ-10E Manual de usuario

Canon

Canon IB4000 series Guía de configuración

Canon

Canon PIXMA iP1980 Manual de usuario

Canon

Canon pixma ip7270 series Manual de usuario

Canon

Canon iPF605 - imagePROGRAF Color Inkjet Printer Manual técnico

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

IRA3D

IRA3D POETRY4 Manual de usuario

Ricoh

Ricoh Aficio AP400 Manual de usuario

BIXOLON

BIXOLON SRP-352plusV Manual de usuario

Epson

Epson Stylus Photo PX700W Instrucciones de montaje

Ricoh

Ricoh SP204SF Manual de usuario

Star Micronics

Star Micronics futurePRNT TSP100 Manual de usuario

Epson

Epson TM-TM88V-i Manual de uso y cuidado