Canon PIXMA MP630 Manual de usuario
Getting Started
Make sure to read this manual before using the machine. Please keep it in hand for future reference.
MP630
Symbols■
The following symbols are used to mark important instructions. Observe these instructions.
Instructions that, if ignored, could result in personal injury or material damage.
Instructions that must be observed for safe operation.
Additional explanations.
Descriptions for operations that take some time to complete.
Microsoft is a registered trademark of Microsoft Corporation.
Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
•
•
•
•Model Number: K10326(MP630)
1
Contents
Check the Included Items
Turn the Power On
Install the Print Head
Install the Ink Tanks
Align the Print Head
Install the Software
Loading Paper
1
2
3
4
5
6
7
After Installing the Machine
2
12 3 4 5 6 7
(C)
(B)
(A)
1
Check the Included Items
(B) 8cm CD-R adapter
(C) CD-R tray
Manuals
Setup CD-ROM
(containing the drivers, applications and
on-screen manuals)
Warranty
MP-101 paper
(for Automatic Print Head Alignment)
•
•
•
•
Before turning on the machine, remove all the orange tapes and the protective sheets.•
Open the Paper Output Tray with your hands, and take out the Print Head.
The Print Head is placed inside of the Paper Output Tray (A).
ink tank
Print Head
power cord
A USB cable is necessary to connect the machine with your computer.•
3
12 3 4 5 6 7
(1)
(2)
(A)
(B)
(C)
(D)
2
23
1
Turn the Power On
Make sure that the Document Cover (C) is closed.•
Do NOT connect the USB cable at this
stage.
•
Plug in the power cord on the left
side at the back of the machine and
connect the other end to the wall
outlet.
Open the Operation Panel (A) then, press the ON button (B)
to turn on the machine.
Use the
{ or }
button (D) on the
Operation Panel to select the language for
the LCD, then press the OK button. The
standby screen is displayed.
The machine may make some operating noises. This is normal
operation.
•
If an unintended language is displayed on
the LCD, press the Back button on the
Operation Panel to return to the Language
selection screen.
•
4
(A)
(B)
(C)
(D)
3
12
Install the Print Head
Close the Document Cover and lift it with the Scanning
Unit (Cover).
• Firmly raise the Print Head Lock Lever until it stops. (The Print
Head Lock Lever may feel heavy.)
•
If the Print Head Holder does not move, make sure that the
machine is turned on.
•
Open the Paper Output Tray (A), then lift the
Scanning Unit (Cover) (B) until it locks into place.
Raise the Print Head Lock Lever (D).
The Scanning Unit (Cover) (B) is fixed automatically.
The Print Head Holder (C) comes out. (This is where you
install the Print Head.)
Do not handle the Print Head
roughly such as applying them
excessive pressure or dropping
them.
•
The Print Head Holder makes a noise as it moves.
This is normal operation.
•
5
1 2 34 5 6 7
(D)
5
4
3
Remove the Print Head from
the silver package.
Remove and discard the orange
protective cap.
Tilt the Print Head and set it in place. Lower the Print Head Lock
Lever (D) completely.
There may be some transparent or light blue ink on the inside of the bag the Print
Head comes in, or the inside of the protective cap - this has no effect on print quality.
Be careful not to get ink on yourself when handling these items. Be careful not to stain
your hands.
•
Do not knock the Print Head against the sides of the Holder.
Be sure to install it in a well-lit environment.
Pinch the Print Head Lock Lever rmly and lower it gently.
Once you have installed the Print Head, do not remove it unnecessarily.
•
•
•
•
6
(1)
(2)
(A)
4
12
Install the Ink Tanks
Do not hold the sides of the ink tank; ink may splash.•
Pull the orange tape (1) in the
direction of the arrow to peel off the
protective film and remove the film
(2) completely.
If the Print Head Holder moves to the right,
close and reopen the Scanning Unit (Cover).
Be sure to use the supplied ink tanks.
•
•
Do not handle the ink tanks roughly such as
applying them excessive pressure or dropping
them.
•
While pressing down with your left thumb, twist off the
orange protective cap (A) located on the bottom of the ink
tank.
7
5 61 2 3 47
5
4
3
Install all the other ink tanks in the same way.
Wait until the screen above appears (about 6
minutes) and go to the next step.
The machine may make some operating
noises when preparing to print. This is
normal operation.
•
•
Install all the ink tanks.
Close the Scanning Unit (Cover).
Make sure all the Ink lamp lights red.•
Once you have installed the ink tanks, do not
remove them unnecessarily.
•
If an error message is displayed on the LCD,
make sure that the Print Head and the ink tanks
are correctly installed.
•
Press the PUSH mark on the ink tank until it
clicks into place.
Make sure the Ink lamp lights red.
Install the Ink Tank
Be sure to install it in a well-lit environment.•
Match the labels when installing.•
8
(A)
(B) (B)
(D)
(C)
5
23
1
Align the Print Head
Align the Print Head for better print results.
This takes about 7 minutes.
Use a sheet of supplied speciality paper
(MP-101) for alignment.
Open the Paper Support
(A) and pull it out.
Load a sheet of supplied speciality paper
(MP-101) in the Rear Tray (D).
Move the Paper Guides
(B) to both edges.
For details, refer to "7 Loading Paper" on page
21.
•
Be sure to use the supplied speciality paper
(MP-101) for Automatic Print Head Alignment.
MP-101 cannot be fed from the Cassette. Load
it in the Rear Tray.
MP-101 has the front and back sides. Load it
with the whiter side facing up.
•
•
•
Make sure that the
Output Tray Extension
(C) is extended.
•
Tabla de contenidos
Otros manuales de Impresora de Canon
Canon
Canon Pixma E3400 Series Guía de configuración
Canon
Canon 8468B023 Manual de usuario
Canon
Canon 900D - i Color Inkjet Printer Guía de configuración
Canon
Canon PIXMA iP2000 Series Instrucciones de uso
Canon
Canon LBP-810 Manual de usuario
Canon
Canon BJC-2100 Series Manual de usuario
Canon
Canon CP-330 Manual de usuario
Canon
Canon MB2100 Series Manual de usuario
Canon
Canon PIXMA MX512 Instrucciones de uso
Canon
Canon MAXIFY GX4000 Series Manual de usuario
Canon
Canon PIXMA MX7600 Manual de usuario
Canon
Canon iP4000 - PIXMA Photo Printer Manual de instrucciones
Canon
Canon imageCLASS MF419dw Manual de usuario
Canon
Canon Pixma iP1200 Manual de usuario
Canon
Canon SELPHY CP790 Manual de usuario
Canon
Canon MF832Cdw Manual de usuario
Canon
Canon LBP3010 Series Manual de usuario
Canon
Canon PIXMA iP6000D Manual de usuario
Canon
Canon LASER SHOT LBP-1210 Manual de usuario
Canon
Canon PIXMA mini320 Series Manual
