Canon FAX-L240 Manual de usuario
HY8-90CY-000
JUNE 2002
COPYRIGHT
2002 CANON INC. CANON FAX-L240/L290 JUNE 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
REVISION 0
SERVICE REFERENCE
MANUAL
FAX-L240 H12-2513 230V EC
FAX-L240 H12-2514 230V UK
FAX-L240 H12-2515 230V GER
FAX-L240 H12-2517 230V FRN
FAX-L290 H12-2503 230V EC
FAX-L290 H12-2504 230V UK
FAX-L290 H12-2505 230V GER
FAX-L290 H12-2507 230V FRN
TELEPHONE 6 KIT H12-3823 230V EU
TELEPHONE 6 KIT H12-3824 230V UK
(EC/UK/GER/FRN)
1
I. PREFACE
This manual is based on the following manuals, and only includes differences between FAX-L200/
L280 and FAX-L240/L290.
HY8-10AQ-000 FAX-L200/L280 SERVICE MANUAL, Rev.0
HY8-30AM-000 FAX-L200/L280 PARTS CATALOG, Rev.0
HY8-80AP-000 FAX-L200/L280 CIRCUIT DIAGRAM, Rev.0
II. CONTENTS
CHAPTER 1 : POINTS OF DIFFERENCE FROM THE ORIGINAL MACHINE
This chapter explains the differences between this machine and the original one.
CHAPTER 2 : CIRCUIT DIAGRAM
This chapter contain the pages which are different from those in the Circuit Diagram
for FAX-L240/L290.
2
CHAPTER 1
POINTS OF DIFFERNECE
FROMTHE ORIGINALMACHINE
3
1. Parts change
For details of any change in parts numbers, see the Parts Catalog.
2. Specification change
Canges have been made to the electrical circuitry, and the functions of the NCU board have
been integrated with those of the SCNT board. In this Service Reference Manual, detailed
explanations of the electrical circuitry have been omitted (to respect the decision not to disclose
detailed information in technical documentation, e.g., on ICs).
Power consumption standby less than 3.5W / less than 500W (when operating)
Modulation method
G3 image signals ITU-T V.27ter, V.29, V.17, V.34
G3 procedure signals ITU-T V.21
Modem IC FM336plus
ADF capacity Max. 30 sheets (A4/Letter)
Transmission/Reception FAX-L240: Approx. 256 pages
memory FAX-L290: Approx. 448 pages
Other Summer time added.
Detecting a Residual Cartridge added.
Paper tray (ASF) FAX-L240 FAX-L290
Envelopes None Approx. 7 envelopes
Transparencies None 1 sheet
Note on Late Start: Do not change the settings of #1 SSSW SW28 bit2 and bit3.
If they are changed, a communication error might occur.
4
Interface specifications (FAX-L290)
interface USB only
Support software Windows 98/Me/2000/XP
Winsows 95/NT4.0 (Not support)
FAX-L290 Suite
USB I/F
Windows 95 not
supported
Windows 98 conditionally
supported*
Windows NT 4.0 not
supported
Windows 2000 conditionally
supported*
Windows Me conditionally
supported*
Windows XP conditionally
supported*
*: A USB connection applies to Windows XP/Me/2000 pre-install models and to
pre-install models upgraded to Windows XP/Me/2000 from Windows 98 or later.
Windows Drivers
Win98.Me LBP Printer Driver (USB supported)
Win2000.XP LBP Printer Driver (USB supported)
5
3. Setting the Language and Country
When you connect the power cord to an AC outlet for the first time, you need to select the
language for the LCD display. For some countries, you also need to select the country where
you are using the FAX machine. The FAX machine automatically switches the selectable
settings and the default settings in the menus to suit the selected country.
Follow this procedure to set the language and country.
After connecting the power cord, the display changes from PLEASE WAIT to DISPLAY LAN-
GUAGE.
Once you have selected the language and country, these setting menus will not appear next
time you connect the power cord.
Normally, the country selection window will appear when the user has selected a language.
A shift to the screen, however, will not occur if the user has selected any of the following for #5
TYPE in service mode:
EUROPE2, POLAND, ASIA, SLOVENIA, SINGAPORE, CHINA, SAF, HONG KONG, N.Z,
AUSTRALIA, UK, GERMAN, ITALY, SWEDEN.
6
4. Setting the SummerTime
Some countries adopt the summer time system that shifts the clock time ahead or back ac-
cording to the change in seasons.You can select if the time information in your FAX changes
to match your country summer time system and set the day and time when the summer time
begins and ends.
Operation at the Start of Summer Time
When the time selected for BEGIN DATE/TIME comes, the time stored by the machine is put
forward by 1 hour. Any delayed call falling whitin the affected time slot will immediately be
initiated when the time has come and the time has been put forward.
Operation at the End of Summer Time
When the time selected for END DATE/TIME comes, the time stored by the machine is put
back by 1 hour. Any delayed call falling whitin the affected time slot will immediately be initi-
ated when the time has come and the time has been put back.
If exactly the same date/time is selected for BEGIN DATE/TIME and END DATE/TIME, the
time is put forward/back by 1 hour repeatedly year after year.
SUMMER TIME
SYSTEM SETTING
OFF
ON BEGIN DATE/TIME
MONTH
WEEK
DAY
TIME
JANUARY
FEBRUARY
MARCH
APRIL
MAY
JULY
AUGUST
JUNE
SEPTEMBER
NOVEMBER
DECEMBER
OCTOBER
FIRST WEEK
SECOND WEEK
THIRD WEEK
LAST WEEK
FOURTH WEEK
SUNDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
SATURDAY
FRIDAY
END DATE/TIME
MONTH
WEEK
DAY
TIME
JANUARY
FEBRUARY
MARCH
APRIL
MAY
JULY
AUGUST
JUNE
SEPTEMBER
NOVEMBER
DECEMBER
OCTOBER
FIRST WEEK
SECOND WEEK
THIRD WEEK
LAST WEEK
FOURTH WEEK
SUNDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
SATURDAY
FRIDAY
7
#1 SSSW (service soft switch setting)
SW09 (service soft switch 09: communication result display function settings)
Bit Function 1 0
0 After normal end of communications, Display No display
communications results displayed
1 After communications ending in error, Display No display
communications results displayed
2 Not used
3 Not used
4 Not used
5 Not used
6 (New)Summer Time setting No display Display
7 Not used
[Bit 6]
If Display is selected, the items associated with the summer time function will be added to
the user data, enabling the user to make summer time settings.
8
5. Detecting a Residual Cartridge
5.1 Out line
This mechanism is designed to automatically cammunicate (ECM) printer information,
e.g., cartridge replacement, printer number.
All Bits of the other machine’s DIS must be set to [1]; in other words, the presence of a single
[0] will cause the communication to end in error.
Bit 27 ECM: [0]=Not Provided, [1]=Provided
Bit 53 Binary File Transmission (BFT): [0]=Not Provided, [1]=Provided
Bit 99 Simple Phase C BFT Negotiations capability
: [0]=Not Provided, [1]=Provided
The communication will end normally if the other party returns MCF in
response to PPS-EOP. If, however, the other machine has a problem in
compatibility in relation to BFT, it will return FDM and the communication will
end in error.
NOTE
Printer information
Forwarding of data only
FAX-L240
FAX-L290 FAX Win 2000
English
(BFT recive)
PSTN Sever
Este manual sirve para los siguientes modelos
9
Tabla de contenidos
Otros manuales de Máquina de fax de Canon
Canon
Canon FAX-JX500 Manual de usuario
Canon
Canon B45 - Faxphone B45 Bubble Jet Fax Machine Manual
Canon
Canon FAXPHONE B150 Manual de usuario
Canon
Canon MultiPASS 800 Manual de usuario
Canon
Canon Super G3 FAX Board-AR1 Manual de usuario
Canon
Canon FAXPHONE B150 Manual de usuario
Canon
Canon FAXPHONE L80 Guía del usuario
Canon
Canon FAX-B140 Manual de usuario
Canon
Canon Fax Manual de usuario
Canon
Canon FAX-L350 Manual de usuario
Canon
Canon K10375 Manual de usuario
Canon
Canon FaxPhone L380 Manual de usuario
Canon
Canon FAX-L120 Guía del usuario
Canon
Canon B45 - Faxphone B45 Bubble Jet Fax Machine Manual de usuario
Canon
Canon MULTIPASS C75 Manual de usuario
Canon
Canon Fax-L260i Manual de usuario
Canon
Canon FAXPHONE 40 Manual de usuario
Canon
Canon FAX-B820 Manual de usuario
Canon
Canon FAX-JX500 Manual de usuario
Canon
Canon L360 Manual de usuario
