Canon WFT-E7 Manual de usuario

INSTRUCTION MANUAL

Wireless File Transmitter

for EOS R

WFT-E7 (Ver.2)

This manual is for the WFT-E7 (Ver.2) installed with firmware version 1.4.0

or later.

The transmitter is an accessory for EOS cameras that enables LAN

functions to be used when attached to the camera.

Using the transmitter’s LAN functions enables you to do the following:

Transfer images to an FTP server

Use EOS Utility to shoot, view, and download images

remotely

Introduction

What You Can Do with the Transmitter

FTP Transfer (p.31)

EOS Utility (p.49)

To comply with local radio wave regulations, Canon offers five

region-specific versions of the transmitter (A, B, C, D, and E) in

various areas around the world (see separate sheet). For

convenience, the product in this manual is referred to as “WFT-E7

(Ver.2)”, without reference to the versions A, B, C, D, or E.

In this manual, the term “access point” indicates wireless LAN

access points, wireless LAN routers, etc. that relay a LAN

connection.

These instructions should be followed only after setting up your LAN

and FTP server environments. For information about setting up the

environments, refer to the documentation provided with each device

or contact the manufacturer.

Read the Camera Instruction Manual and familiarize yourself with

operating the camera before following the instructions on camera

options.

Icons in this Manual

<6> : Indicates the Main Dial.

<5> : Indicates the Quick Control Dial.

<W><X><Y><Z> : Indicates the <V> cross keys on the top, bottom,

left, and right.

<0>: Indicates the Setting button.

* In addition to the above, the icons and symbols used on the camera’s buttons

and displayed on the monitor are also used in this manual when discussing

relevant operations and functionality.

(p.**) : Reference page numbers for more information.

: Warnings to prevent potential problems during operation.

: Supplemental information.

Conventions Used in this Manual

Basic Assumptions

All operations explained in this manual assume that the power

switch is set to <1>.

It is assumed that all the menu settings, Custom Functions, etc. are

set to their defaults.

Image transfer, remote shooting, or image viewing requires adequate

knowledge of configuring your LAN and FTP server. Canon cannot provide

support for configuring LANs or FTP servers.

Note that Canon cannot be held liable for any loss or damage to the

transmitter from erroneous network or FTP server settings. In addition,

Canon cannot be held liable for any other loss or damage caused by use of

the transmitter.

When using LAN functions, establish appropriate security at your own risk

and discretion. Canon cannot be held liable for any loss or damage caused

by unauthorized access or other security breaches.

Chapter List

Introduction 2

Basic Network Settings 17

Transferring Images to an FTP Server 31

Operating Remotely Using EOS Utility 49

Terminating the Connection and Reconnecting 53

Checking and Operating Connection Settings 57

Troubleshooting Guide 69

Reference 91

Introduction 2

Conventions Used in this Manual..................................................... 3

Chapter List ...................................................................................... 5

Safety Instructions............................................................................ 8

Nomenclature ................................................................................. 10

Installing and Removing the Battery............................................... 12

Using a Household Power Outlet ................................................... 14

Attaching to the Camera................................................................. 15

Basic Network Settings 17

Preparation..................................................................................... 18

Displaying the Connection Wizard ................................................. 20

Checking the Type of Access Point................................................ 22

Connecting via WPS (PBC Mode).................................................. 23

Connecting via WPS (PIN Mode) ................................................... 24

Connecting to a Detected Network Manually ................................. 26

Setting the IP Address.................................................................... 29

Transferring Images to an FTP Server 31

Configuring FTP Server Connection Settings ................................ 32

Transferring Images Individually..................................................... 37

Batch Transfer ................................................................................ 42

Transferring Images with a Caption................................................ 46

Viewing Transferred Images........................................................... 47

Operating Remotely Using EOS Utility 49

Configuring EOS Utility Connection Settings ................................. 50

Using EOS Utility............................................................................ 52

Terminating the Connection and Reconnecting 53

Terminating the Connection............................................................ 54

Reconnecting ................................................................................. 55

Contents

5Checking and Operating Connection Settings 57

Displaying the Connection Settings Screen....................................58

Changing Settings...........................................................................60

Saving and Loading Settings ..........................................................64

Function Settings Screen................................................................66

Troubleshooting Guide 69

Responding to Error Messages ......................................................70

Wireless Function Notes .................................................................86

Security ........................................................................................... 88

Checking Network Settings.............................................................89

Reference 91

Creating and Registering Captions .................................................92

Setting IP Address Manually...........................................................94

Using a Bracket (Sold Separately)..................................................96

Specifications .................................................................................. 97

Index .............................................................................................101

Be sure to read these instructions in order to operate the product safely.

Follow these instructions to prevent injury or harm to the operator of the

product or others.

Safety Instructions

WARNING Denotes the risk of serious injury or death.

Use only power sources specified in this instruction manual for use with the product.

Do not disassemble or modify the product.

Do not expose the product to strong shocks or vibration.

Do not touch any exposed internal parts.

Stop using the product in any case of unusual circumstances such as the presence

of smoke or a strange smell.

Do not use organic solvents such as alcohol, benzine or paint thinner to clean the

product.

Do not get the product wet. Do not insert foreign objects or liquids into the product.

Do not use the product where flammable gases may be present.

This may cause electric shock, explosion or fire.

Observe the following instructions when using commercially available batteries or

provided battery packs.

• Use batteries/battery packs only with their specified product.

• Do not heat batteries/battery packs or expose them to fire.

• Do not expose the terminals to dirt or let them come into contact with metallic pins

or other metal objects.

This may cause electric shock, explosion or fire.

Follow any indications to turn off the product in places where its use is forbidden.

Not doing so may cause other equipment to malfunction due to the effect of

electromagnetic waves and even result in accidents.

CAUTION Denotes the risk of injury.

Do not leave the product in places exposed to extremely high or low temperatures.

The product may become extremely hot/cold and cause burns or injury when touched.

Safety Instructions

The transmitter is a precision instrument. Do not drop it or subject it to

physical shock.

The transmitter is not waterproof. Do not use it underwater.

Wipe off any moisture with a dry and clean cloth. If the transmitter has been

exposed to salty air, wipe it with a clean, well-wrung wet cloth.

Never leave the transmitter near any equipment that generates a strong

magnetic field, such as magnets or electric motors.

Do not leave the transmitter in excessive heat, such as in a vehicle in direct

sunlight. High temperatures may damage the transmitter.

Do not wipe the transmitter using cleaners containing organic solvents. For

stubborn dirt, take it to the nearest Canon Service Center.

Avoid storing the transmitter where there are chemicals that result in rust

and corrosion such as in a chemical lab.

Handling Precautions

LCD panel

* Bluetooth connectivity is not supported on the EOS R.

Nomenclature

Battery compartment

cover (p.12)

Battery compartment

cover release lever

(p.12)

Power lamp

(p.15)

LAN

> lamp

LCD panel

Power switch (p.15)

Tripod screw

<a> port (p.15) Ethernet RJ-45 port

Error code number

Wireless signal strength

Battery check

Connection icon

Wired LAN

connection

Bluetooth connection*

Otros manuales para WFT-E7

Tabla de contenidos

Otros manuales de Accesorios para cámaras de Canon

Canon

Canon MiniTT1 Manual de usuario

Canon

Canon EF-S55-250mm f/4-5.6 IS II Manual de usuario

Canon

Canon Easydive Leo3 Manual de usuario

Canon

Canon WP-DC36 Manual de usuario

Canon

Canon EF 20mm f/2.8 USM Manual de usuario

Canon

Canon Extender EF 1.4x II Manual de usuario

Canon

Canon Cine-Servo Manual de usuario

Canon

Canon Macro ring lite MR-14EX II Manual de usuario

Canon

Canon 540EZ - Speedlite - Hot-shoe clip-on Flash Manual de usuario

Canon

Canon Speedlite ST-E10 Instrucciones de montaje

Canon

Canon AE Motor Drive FN Manual de usuario

Canon

Canon Speedlite Transmitter ST-E2 Manual de usuario

Canon

Canon MR-14EX II Manual de usuario

Canon

Canon ANGLE FINDER C Manual de instrucciones

Canon

Canon FOCUSING RAIL Manual de instrucciones

Canon

Canon Speedlite 299T Manual de usuario

Canon

Canon MA-52 Manual de usuario

Canon

Canon EOS C300 Manual de usuario

Canon

Canon REBEL 350D Manual de usuario

Canon

Canon RF85/1.2 L USM Manual de usuario

Canon

Canon Film Chamber 250 Manual de usuario

Canon

Canon Camera Accessory Kit 5 Manual de usuario

Canon

Canon 540EZ - Speedlite - Hot-shoe clip-on Flash Manual de usuario

Canon

Canon LC-2 Manual de usuario

Manuales populares de Accesorios para cámaras de otras marcas

Viltrox

Viltrox EF-NEX Instrucciones de instalación

Calumet

Calumet 7100 Series CK7114 Manual de usuario

Ropox

Ropox 4Single Series Manual de usuario

Cambo

Cambo Wide DS Digital Series Instrucciones de funcionamiento

Samsung

Samsung SHG-120 Manual de usuario

Ryobi

Ryobi BPL-1820 Manual de operación

Aegis

Aegis ABL-36020P Manual de usuario

Pentax

Pentax Data Back Fc Manual de usuario

Fantasea

Fantasea EyeGrabber F Series Manual de usuario

Honeywell

Honeywell HDZ20HD Manual de usuario

EGO

EGO BA1400T Manual de usuario

Sima

Sima SRW-62 Manual de usuario

Shape

Shape A7SSMKIT Manual de usuario

Slide Kamera

Slide Kamera HST-2 Manual de usuario

Power works

Power works 2902613 Manual de usuario

SES

SES SE-2047-2 Manual de usuario

Olympus

Olympus PT-EP05L Manual de usuario

Starlite

Starlite OctoDome nxt Manual de usuario