Canon GL-2 Manual de usuario

Quick Start Guide

Canon GL2 Video Camera

Remove lens cap on front of camera

Attach battery pack to rear of camera by extending the viewfinder,

rotating it upwards, and sliding the pack into place

Insert miniDV tape by sliding the OPEN/EJECT button forward, placing tape

in compartment, pressing the PUSH mark until it clicks, and closing the cover

Initial Setup

To Begin Recording

Slide the POWER switch to CAMERAon the top left side of the camera

Slide the TAPE/CARD switch to TAPE near the grip on the right side

Turn the standby lever to STANDBY

Put the camera in EASY mode by sliding the program selector to the left.

This will allow you to point and shoot without making any manual adjustments.

For all other recording modes, slide the program selector to P.

Next, push in on the Select Dial and choose the mode you prefer.

AUTO - This is the same as Easy mode, except that you now have the

option of using any of the camcorder’s manual options.

MANUAL - This allows you to freely adjust any of the camera’s audio or

visual settings as you like.

For a more detailed description of all the camera’s possible settings,

please consult the full Instruction Manual.

Open the LCD screen by pressing the OPEN button and rotating it outward.

If you prefer, you can also use the camera’s Viewfinder instead.

Press the START/STOP button to begin recording. Press the START/STOP

button again to pause the recording. You can stop and restart as often as you like.

Canon GL2 Video Camera

Shotgun microphone

Additional Features

The shotgun mic will typically provide better sound quality for your

recording. To use it, slide the mic onto the accessory shoe and tighten

it with the shoe lock. Then select one of the following modes:

Shotgun: Best for recording clear sound from the front

Stereo 1: For recording sound from the front and surrounding area

Stereo 2: For recording surrounding sound in a wider area than Stereo 1

Zoom

To zoom in and out while recording, use the Wand Tcontrols.

T (telephoto) zooms in. W (wide-angle) zooms out.

Charging the battery

To charge the camera battery - place it in the power

adapter, connect the power cord to the adapter, and

plug it into an electrical outlet. When the power

light glows steadily, the pack is fully charged.

Running onAC power

To run the camera onAC power - 1) connect the power cord to the

adapter 2) plug the adapter into an outlet 3) connect the DC coupler

to the adapter and 4) attach the DC coupler to the camera

To playback your recording:

1. Slide the power switch to PLAY (VCR)

2. Load the casette tape

3. Open cover on top of the handle, and use the controls

To playback on a TV monitor:

Follow the 3 steps above, then connect the RCAcable to the A/V input

on the back of the camera, and the audio/video inputs on your TV.

If you encounter any problems, please give us a call at 1-877-633-8866 or

consult the full instruction manual included in this package.

Quick Start Guide

Canon GL2 Video Camera

Quick Start Guide

Canon GL2 Video Camera

Remove lens cap on front of camera

Attach battery pack to rear of camera by extending the viewfinder,

rotating it upwards, and sliding the pack into place

Insert miniDV tape by sliding the OPEN/EJECT button forward, placing tape

in compartment, pressing the PUSH mark until it clicks, and closing the cover

Initial Setup

To Begin Recording

Slide the POWER switch to CAMERAon the top left side of the camera

Slide the TAPE/CARD switch to TAPE near the grip on the right side

Turn the standby lever to STANDBY

Put the camera in EASY mode by sliding the program selector to the left.

This will allow you to point and shoot without making any manual adjustments.

For all other recording modes, slide the program selector to P.

Next, push in on the Select Dial and choose the mode you prefer.

AUTO - This is the same as Easy mode, except that you now have the

option of using any of the camcorder’s manual options.

MANUAL - This allows you to freely adjust any of the camera’s audio or

visual settings as you like.

For a more detailed description of all the camera’s possible settings,

please consult the full Instruction Manual.

Open the LCD screen by pressing the OPEN button and rotating it outward.

If you prefer, you can also use the camera’s Viewfinder instead.

Press the START/STOP button to begin recording. Press the START/STOP

button again to pause the recording. You can stop and restart as often as you like.

Canon GL2 Video Camera

Shotgun microphone

Additional Features

The shotgun mic will typically provide better sound quality for your

recording. To use it, slide the mic onto the accessory shoe and tighten

it with the shoe lock. Then select one of the following modes:

Shotgun: Best for recording clear sound from the front

Stereo 1: For recording sound from the front and surrounding area

Stereo 2: For recording surrounding sound in a wider area than Stereo 1

Zoom

To zoom in and out while recording, use the Wand Tcontrols.

T (telephoto) zooms in. W (wide-angle) zooms out.

Charging the battery

To charge the camera battery - place it in the power

adapter, connect the power cord to the adapter, and

plug it into an electrical outlet. When the power

light glows steadily, the pack is fully charged.

Running onAC power

To run the camera onAC power - 1) connect the power cord to the

adapter 2) plug the adapter into an outlet 3) connect the DC coupler

to the adapter and 4) attach the DC coupler to the camera

To playback your recording:

1. Slide the power switch to PLAY (VCR)

2. Load the casette tape

3. Open cover on top of the handle, and use the controls

To playback on a TV monitor:

Follow the 3 steps above, then connect the RCAcable to the A/V input

on the back of the camera, and the audio/video inputs on your TV.

If you encounter any problems, please give us a call at 1-877-633-8866 or

consult the full instruction manual included in this package.

Quick Start Guide

Canon GL2 Video Camera

Otros manuales para GL-2

Tabla de contenidos

Otros manuales de Videocámara de Canon

Canon

Canon VIXIA HF M52 Manual de usuario

Canon

Canon Legria HFM31 Manual de usuario

Canon

Canon VC 10 Manual de usuario

Canon

Canon XH A1S Manual de usuario

Canon

Canon ZR100 Manual de usuario

Canon

Canon optura Xi Manual de usuario

Canon

Canon ES290 Manual de usuario

Canon

Canon ZR960 Manual de usuario

Canon

Canon VIXIA HF S20 Manual de usuario

Canon

Canon ES8400V Manual de usuario

Canon

Canon AutoZoom Electronic 512XL Manual de usuario

Canon

Canon Optura 300 Manual de usuario

Canon

Canon GL1 Manual de usuario

Canon

Canon ZR200 Manual de usuario

Canon

Canon XA20 Manual de usuario

Canon

Canon Auto Zoom 518 SV Manual de usuario

Canon

Canon LEGRIA HF R706 Manual de usuario

Canon

Canon ELURA 2 Manual de usuario

Canon

Canon Vixia HV40 Manual de usuario

Canon

Canon XL H1S Manual de usuario

Canon

Canon HV10 - Camcorder - 1080i Manual de usuario

Canon

Canon DC DC210 Manual de usuario

Canon

Canon Vixia hfr70 Manual de usuario

Canon

Canon ZR400 Manual de usuario

Manuales populares de Videocámara de otras marcas

Toshiba

Toshiba CAMILEO Z100 Manual de usuario

Panasonic

Panasonic NV-VS40B Manual de usuario

Sony

Sony Handycam DCR-DVD7E Manual de usuario

Brinno

Brinno TimeLapse TLC200 Manual de usuario

JVC

JVC GR-SXM68AC Guía de inicio rápido

Panasonic

Panasonic AG-HMC152EN Manual de usuario

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario

MYDLINK

MYDLINK DCS-6100LH Manual de usuario

Sony

Sony video Hi8 Handycam CCD-TR555 Manual de usuario

SECURECOM

SECURECOM V-5014B Manual de usuario

Panasonic

Panasonic HDC-SD100 Manual de usuario

Sharper Image

Sharper Image U-VIDEO Manual de usuario

JVC

JVC AA-V15EG Manual de usuario

Sony

Sony Handycam DCR-VX2000 Manual de usuario

RCA

RCA CC616 Manual de usuario

Panasonic

Panasonic NVM40 Manual de usuario

ATIK Cameras

ATIK Cameras Horizon Manual de usuario

Sony

Sony Handycam HDR-CX580V Manual de usuario