Canon EOS C200 Manual de uso y cuidado

Firmware Update Procedure

Digital Cinema Camera

EOS C200

EOS C200B

This document explains the procedure and cautionary notes for updating (overwriting) the firmware of the EOS

C200 or EOS C200B Digital Cinema Camera.

*Firmware is software installed to control the equipment. it is the firmware that handles many of the camera's operations, such as

shooting or image processing.

Step 1: Prepare items required for the update

To start with, please prepare the following items.

Camera Body EOS C200 or EOS C200B

Computer (Windows: 10, 8.1, 8, 7 SP1 / Mac OS: 10.7 to 10.13)

Memory card (128 MB or higher capacity SD/SDHC/SDXC commercially available memory card)

Memory card reader/writer (commercially available SD card reader or SD card slot built into the computer)

BP-A30 battery pack (supplied with the camera)

CA-A10 AC adapter (supplied with the camera)

IMPORTANT: Precautions for updating the firmware

If the firmware update is not performed correctly, the camera may stop working.

Please be sure to carefully read the important points below, and perform operations in accordance with

the following operating procedure.

All camera settings will be reset when you perform the firmware update.

It is not possible to revert the firmware back to a previous version after you have performed the

firmware update.

Please be absolutely sure NOT to operate the camera buttons or remove the camera’s power source

during the firmware update. Doing so may cause the camera to malfunction.

Step 2: Check the current firmware version

Check whether or not the update applies to the camera’s current firmware version.

1. Connect the compact power adapter to the camera, and insert the battery pack into the camera.

2. Set the switch to CAMERA.

3. Press the MENU, and open the [Firmware] submenu.

[ System Setup] ➤[Firmware]

The current camera firmware version will appear on the screen.

4. Press the MENU, and set the switch to OFF.

If the version number is 1.0.4.1.00:

⇒Firmware update is not required (the firmware has already been updated).

If the version number is 1.0.3.1.00 or earlier:

⇒The firmware can be updated by following the procedure from Step 3 onwards.

1.0.x.1.00

Step 3: Prepare an SD card to use for the firmware update

As preparation before the update, first initialize an SD card, and then use a computer to copy the downloaded

update data to the SD card.

Initialize the SD card with the camera

1. Insert the SD card into the camera’s SD card slot A, and close the SD card compartment cover.

2. Set the switch to CAMERA.

3. Press the MENU, and open the [Initialize Media] submenu.

4. Select [SD Card A] and then press the joystick.

[ Recording/Media Setup] ➤[Initialize Media] ➤[SD Card A]

5. Select [OK] and then press the joystick.

6. When the confirmation message appears, press the joystick.

The SD card is initialized and all the data it contains is erased.

7. Press the MENU, set the switch to OFF, and then remove the SD card.

Copy the firmware update data to the SD card

Use a computer to copy the firmware update data to the SD card initialized on the camera. For computer

operations, please refer to the procedure below corresponding to your computer’s OS (Windows or Mac OS).

For Windows:

1. Insert the initialized SD card into a card reader or the computer’s SD card slot.

A [CANON] icon will be displayed in [Devices with Removable Storage] under [Computer].

2. To copy the data, drag & drop the [VNC4.FIM] update data in the downloaded [c200-v1041-win] folder to

the [CANON] icon.

3. After copying the data, open the folder by double-clicking the [CANON] icon.

If the [VNC4.FIM] file (the firmware update data) is there, the copying process is complete.

When you initialize the SD card, all of the data saved on it will be erased. Please save any important data on the SD card to

your computer or somewhere else before initializing the SD card. In addition, if you perform the firmware update with data

remaining on the SD card, it could cause the camera to malfunction. Make sure you initialize the SD card before performing

the update.

Please be sure to copy the update data to the root directory of the [CANON] SD card.

Caution

For Mac OS:

1. Insert the initialized SD card into a card reader or the computer’s SD card slot.

A [CANON] icon will be displayed on the desktop.

2. To copy the data, drag & drop the [VNC4.FIM] update data from the downloaded [c200-v1041-mac] icon to

the [CANON] icon.

3. After copying the data, open the folder by double-clicking the [CANON] icon.

If the [VNC4.FIM] file (the firmware update data) is there, the copying process is complete.

Step 4: Update the camera to the new firmware

1. After inserting the charged battery pack into the camera, connect the camera to the power outlet using the

compact power adapter.

2. Insert the SD card prepared in Step 3 into the camera’s SD card slot B.

3. Set the switch to CAMERA.

4. Press the MENU, and in the submenu of [ System Setup], select [Firmware], and then press the joystick.

The firmware update confirmation screen will be displayed.

5. When you select [OK] and then press the joystick, the firmware update will start.

Please be sure to copy the update data to the root directory of the [CANON] SD card.

The firmware update takes approximately 4 minutes to complete. During the update, please do not turn off the camera

or operate any of its controls. Doing so may cause the camera to malfunction.

Caution

Updating the firmware

Do not turn off/disconnect the power

Update the firmware?

Version 1.0.x.1.00 →Version 1.0.4.1.00

Cancel

After the update ends, the camera will restart automatically, and a firmware update completion screen will be

displayed.

6. When you press the joystick, all settings will be reset and the [Date/Time] screen will appear. Set the date/time.

7. Perform Step 2, and check that the firmware version has changed to [1.0.4.1.00].

8. Set the switch to OFF, and then remove the SD card.

This completes the firmware update.

Make sure to initialize the SD card used for the firmware update before using it again (refer to Step 3). In addition,

please delete the downloaded firmware your computer.

If the firmware update does not finish normally, or if the camera no longer starts normally, please contact our

camera repair center.

Caution

Firmware updated

1.0.4.1.00

Otros manuales para EOS C200

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Videocámara de Canon

Canon

Canon Vixia HF R20 Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon 2213C002 Manual de usuario

Canon

Canon LEGRIA HFM406 Manual de usuario

Canon

Canon Pixma G1000 series Manual de usuario

Canon

Canon XF305 Manual de usuario

Canon

Canon XF305 Manual de usuario

Canon

Canon AF514XL-S Canosound Manual de usuario

Canon

Canon FS1 Manual de usuario

Canon

Canon 814XL Manual de usuario

Canon

Canon FS10 Manual de usuario

Canon

Canon Vixia mini X Manual de usuario

Canon

Canon imageRunner 60 Manual de usuario

Canon

Canon LEGRIA HF R36 Manual de usuario

Canon

Canon OPTURA200 MC Manual de usuario

Canon

Canon SCOOPIC 16- M Manual de usuario

Canon

Canon VIXIA HF M300 Manual de usuario

Canon

Canon Optura 30 - optura 30 minidv camcorder Manual de usuario

Canon

Canon VIXIA HF200 Manual de usuario

Canon

Canon A-1 Manual de usuario

Canon

Canon Auto Zoom 1218 Manual de usuario

Canon

Canon XL 2 Manual de usuario

Canon

Canon Vistura Manual de usuario

Canon

Canon MV930 Manual de usuario

Manuales populares de Videocámara de otras marcas

Toshiba

Toshiba CAMILEO Z100 Manual de usuario

Panasonic

Panasonic NV-VS40B Manual de usuario

Sony

Sony Handycam DCR-DVD7E Manual de usuario

Brinno

Brinno TimeLapse TLC200 Manual de usuario

JVC

JVC GR-SXM68AC Guía de inicio rápido

Panasonic

Panasonic AG-HMC152EN Manual de usuario

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario

MYDLINK

MYDLINK DCS-6100LH Manual de usuario

Sony

Sony video Hi8 Handycam CCD-TR555 Manual de usuario

SECURECOM

SECURECOM V-5014B Manual de usuario

Panasonic

Panasonic HDC-SD100 Manual de usuario

Sharper Image

Sharper Image U-VIDEO Manual de usuario

JVC

JVC AA-V15EG Manual de usuario

Sony

Sony Handycam DCR-VX2000 Manual de usuario

RCA

RCA CC616 Manual de usuario

Panasonic

Panasonic NVM40 Manual de usuario

ATIK Cameras

ATIK Cameras Horizon Manual de usuario

Sony

Sony Handycam HDR-CX580V Manual de usuario