Canon PIXMA MP990 Manual de usuario

Installing Your Multifunction

to Your Network for the First Time

PIXMA MP990

PIXMA MP640 / PIXMA MP560

Macintosh OS

Preparing to Connect My Multifunction to My Network ..............................................................2

Network Requirements ..........................................................................................................2

Important Information You Need Before Adding Your Multifunction ....................................... 3

Adding Your Multifunction to Your Network ............................................................................... 3

Confirm Connection Status .................................................................................................... 6

Downloading & Installing the Drivers ......................................................................................... 8

Download the Driver ..............................................................................................................8

Installing the Driver .............................................................................................................. 10

Add the Machine ..................................................................................................................17

Page 2

Preparing to Connect My Multifunction to My Network

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer

and access point or router is complete, and that the computer is connected to the network.

Notes on Network Connection

•The configuration, router functions, setup procedures and security setting s of the

network device vary depending on your system environment For detail Is, refer to your

device's instruction manual or contact its manufacturer.

• The machine cannot be used over a wireless and wired connection at the same time.

Wireless Connection

Connect to your network environment over a wireless connection

Page 3

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless

connection without using an access point, is not supported.

Be sure to prepare an access point

Important Information You Need Before Adding Your Multifunction

The following information is required to connect to your access point or router.

•Access Point Name/Network Name:

Also referred to as SSID. A name to identify the specific access point.

•Network Key:

Also referred to as encryption key, WEP key or VVPANVPA2 passphrase, Pre-Shared

key.

A password required to set to prevent unauthorized access to communication.

Check your access point or route for the following information, and then write it down.

NOTE: For details on how to check the following information, refer to the manual of your access

point or router, or contact its manufacturer.

Adding Your Multifunction to Your Network

Step One

Use the Easy-Scroll Wheel* (A) to select Settings, and then press the OK button.

*Easy-Scroll Wheel location varies according to model MP640 pictured in examples below.

Page 4

Step Two

Select Device settings, then press the OK button.

Step Three

Select Yes, then press the OK button.

When wireless connection is enabled, the V\Ii-Fi lamp** (B) lights blue.

**Wi-Fi lamp location varies according to model.

Step Four

Select Easy settings, and then press the OK button.

Step Five

Select the access point name you wrote down, then press the OK button.

Page 5

NOTE If you are living in an apartment, nearby access points in use may be detected.

Step Six

When one of the following screens is displayed, enter the network key you wrote down, then

press the OK button.

If the following screen is not displayed, go to Step Eight.

Use the Easy-Scroll Wheel to select the character Use the button to move the cursor to the

right.

IMPORTANT: Enter upper and lower case letters of the alpha bet correctly.

Step Seven

Make sure that the network key is correct, and then press the OK button.

Step Eight

When the completion screen appears, press the OK button, then press the HOME*** button (C).

***HOME button location varies depending on model.

The standby screen returns.

Page 6

Note:

If Failed to connect to the access point appears, press the OK button, make sure that the

network key is correct, then enter it again. If a connection still cannot be established, refer to

the printed manual: Network Setup Troubleshooting.

Confirm Connection Status

Step One

Press the HOME*** button (A), select Settings using the Easy-Scroll Wheel (B), and then press

the OK button.

***HOME button location varies depending on model.

IMPORTANT Confirm connection status after installing the machine in the target location.

Step Two

Select Device settings, and then press the OK button.

Step Three

Select LAN settings, and then press the OK button

Page 7

Step Four

Select Confirm LAN settings, then press the OK button.

Step Five

Select Wireless LAN setting list, then press the OK button.

Make sure that Connection is set to Active, and then press the HOME button.

It may take a while before the connection is complete In this case, press the Back* button (C)

and wait for about a minute, then display the Wireless LAN setting list screen again.

*Back button location varies depending on model.

NOTE: If the communication status does not improve, make sure of the following.

•The machine and network device are turned on.

•There is no obstacle between the machine and access point, and wireless

communication is possible.

•There is no microwave, refrigerator or any other object that may cause radio interference

nearby.

Page 8

Downloading & Installing the Drivers

Download the Driver

To use the machine by connecting it to a computer, software including the drivers needs to be

copied (installed) to the computer's hard disk The installation process takes about 20 minutes

(The installation time varies depending on the computer environment or the number of

applications to be installed.)

Step One

Go to the Canon Canada Support Home Page

Click here to go

to the Canon Canada Support Home Page

Step Two

Select Consumer & Home Office in the Product Type menu dropdown, All-In-One Printer in

the Product Family, PIXMA MP Series in the Product Series and click on the Drivers &

Software link for your model.

Step Three

In the Drivers I Software Selection section, select your operating system in the Select OS

dropdown menu.

Please 5elect ,0Uf operotinv "stem to

view •••

Page 9

Step Four

In the Drivers section, click the link (red printing) for the MP Driver.

Step Five

On the next screen, read the information and instructions and click I Agree - Begin Download

Once the file has been downloaded, double-click it to begin the installation process

IMPORTANT:

•Quit all running applications before installation.

•Log on as the administrator (or a member of the Administrators group).

•Do not switch users during the installation process.

•Internet connection may be required during the installation Connection fees apply.

•It may be necessary to restart your computer during the installation process. Follow the

on-screen instructions. The installation resumes once your computer has restarted.

•If the firewall function of your security software is turned on, a warning message may

appear that Canon software is attempting to access the network. If such a warning

message appears, set the security software to always allow access.

Page 10

Installing The Driver

Step One

Double-click the Setup icon

Step Two

If the following message appears, click Open

Otros manuales para PIXMA MP990

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Canon

Canon

Canon imagePress C910 Manual de usuario

Canon

Canon PIXMA MP170 Manual de usuario

Canon

Canon ImageRunner 3245 Hoja de información del producto

Canon

Canon PIXMA MP830 Manual de usuario

Canon

Canon PIXMA MP470 Manual de usuario

Canon

Canon Color imageCLASS MF8080Cw Manual de usuario

Canon

Canon imageRUNNER 5070 Manual de usuario

Canon

Canon PIXMA MP270 Manual de usuario

Canon

Canon PIXMA MP140 Series Manual

Canon

Canon 1750 Manual de usuario

Canon

Canon ColorWave 3800 Manual de usuario

Canon

Canon IR5000 - iR B/W Laser Manual de usuario

Canon

Canon image RUNNER 3245 Instrucciones de funcionamiento

Canon

Canon imageCLASS MF3010 Guía de seguridad

Canon

Canon imageRUNNER ADVANCE C7580i II Manual de funcionamiento

Canon

Canon imageCLASS MF6500 Series Guía del usuario

Canon

Canon MultiPass C560 Manual

Canon

Canon iR2016 Series Manual de usuario

Canon

Canon imageRUNNER ADVANCE C7270 Instrucciones de instalación

Canon

Canon PIXMA MX512 Manual de usuario

Canon

Canon MultiPASS F60 Manual de usuario

Canon

Canon PIXMA MG6420 Manual de usuario

Canon

Canon FAX-L400 Manual de usuario

Canon

Canon imageCLASS D760 Manual

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario