Canon K10550 Manual de usuario

QT6-4345-V01 XXXXXXXX © CANON INC. 2021 PRINTED IN XXXXXXXX

IMPRIMÉ XX XXXXXXXX

RMC (Regulatory Model Code): K10550

RMC (Regulatory Model Code): K10549

Setup Guide

Read this manual before attempting to operate the printer. Keep this manual for future reference.

Furthermore, in order to ensure that this product is used safely, you should always also read the “Quick Guide” (separate

manual).

ENGLISH

Guide d’installation

Lisez ce manuel avant d’essayer d’utiliser l’imprimante. Conservez ce manuel pour toute consultation ultérieure.

De plus, afin de vous assurer que ce produit est utilisé en toute sécurité, lisez également le “Guide rapide” (manuel

distinct).

FRANÇAIS

Guia de configuração

Leia este manual antes de tentar operar a impressora. Guarde este manual para referência futura.

Além disso, para garantir que este produto seja usado com segurança, leia também o “Guia rápida” (manual separado).

PORTUGUÊS

Guía de configuración

Lea este manual antes de intentar operar la impresora. Conserve este manual a mano para futuras referencias.

Además, para garantizar que este producto se utilice de manera segura, siempre debe leer también la “Guía rápida”

(manual aparte).

ESPAÑOL

Overview of Setup Installation Space

The illustrations in this manual are using the GP-4000 as an example for explanation. Note that your printer may look different from these

illustrations in some cases.

Set up the printer using the following procedure. Note that if an error

message appears during setup or other problems occur, refer to "Responding

to Messages" on p. 16.

Removing the Packaging Material Page 4

Assembling the Printer Stand Page 4

Attaching the Roll Unit Page 4

Installing the Printer Page 4

Turning On the Printer Page 5

Installing the Ink Tanks Page 7

Installing the Print Head Page 9

Performing Print Head Adjustment Page 11

Selecting the Method of Connecting

to Your Computer Page 13

Installing the Software on Your

Computer Page 14

Loading Paper Page 15

Performing Color Calibration Page 15

Storing Accessories Page 15

Printing From a Smartphone or Tablet Page 15

Displaying the Online Manual Page 15

Sending Information To Canon Page 15

Trademarks Page 16

Responding to Messages Page 16

When installing the printer, it is recommended that you secure the following

space around the printer.

Important

●The printer stand and roll unit may be options depending on the model

you purchased. Please note that the required space differs depending

on whether the options are used or not.

●The space required in front of the printer varies depending on how the

basket is used.

■GP-4000

Required space (W x D x H)

78.5 × 66.3 × 61.5 inches

1,993 × 1,684 × 1,560 mm

7.9 inches

(200 mm)

7.9 inches

(200 mm)

23.6 inches

(600 mm)

3.9 inches

(100 mm)

5.9 inches

(150 mm)

■GP-2000

Required space* (W x D x H)

59.5 × 66.3 × 61.5 inches

1,510 × 1,684 × 1,560 mm

Required space** (W x D x H)

59.5 × 56.5 × 40.2 inches

1,510 × 1,434 × 1,021 mm

3.9 inches

(100 mm)**

3.9 inches

(100 mm)*

23.6 inches

(600 mm)*

23.6 inches

(600 mm)**

5.9 inches

(150 mm)

7.9 inches

(200 mm)

7.9 inches

(200 mm)

* When using the SD-21 printer stand

** When not using the printer stand

ENGLISH

Package Contents

Check that the following included accessories are contained in the package. Note that a cable to connect the printer to a computer is not provided with the

printer.

Note

●Some of the included accessories are not described in this manual. Store them along with the other accessories as they are required for other functions.

●For instructions on the included items not described in this manual, refer to the Online Manual by following the instructions in "Displaying the Online Manual"

on p. 15.

nop

aPrinter

bBasket rod / Basket cloth *1

cPaper for print head adjustment

dSetup Guide (this manual)

eInk tanks (11 pieces)

fSet of CD-ROMs

gSet of printer documentation

hPower cord

iRod holder (2 pieces) *1

jPrint head

kStand legs (2 pieces) *1

lStand stay *1

mBasket arm (2 pieces) *1

nBasket locking support (2 pieces) *2

o3-inch paper core attachment (2 pieces)

pPrinter stand mounting bracket set *1

qAccessory pocket

rHolder stopper *3

*1 Only included with models where the printer stand is included as

standard. Note that it may be packaged in a separate box depending on

the region where you purchased the printer.

The items included with the printer stand are described in the Printer

Stand Setup Guide.

*2 These items might not be included depending on your region.

*3 This is used when loading roll paper. For details, refer to the Online Manual.

Manuals Included with This Printer

Setup Guide (this manual)

Describes how to setup the printer.

Printer Stand Setup Guide

Describes how to assemble the stand. This item might not be included depending on your model.

Quick Guide

Contains information related to warnings for using this printer safely and information related to replacing paper, ink tanks, and the print head.

Online Manual (Electronic Manuals)

This manual describes advanced usage of the printer such as paper saving tips, how to print a poster and banner with the supplied software and print quality

adjusting method, in addition to the basic instructions for printing on roll paper or cut sheet. To view the Online Manual, refer to "Displaying the Online Manual"

(p. 15).

■Roll Unit Provided as an optional accessory.

Refer to the included setup guides for the accessories.

Handling Cautions

Moving the Printer

●Have the following number of people grasp

the carrying grips on each side in the base of

the printer. The weight may cause pain such

as back pain.

GP-4000 (Approx. 233 lb (106 kg))

6 people or more

GP-2000 (Approx. 187 lb (85 kg))

6 people or more

For the GP-4000

Standing Up the Printer

●When standing the printer up, place

cardboard or other material underneath to

prevent damage and scratching, and make

sure the side with the operation panel is up.

Furthermore, make sure that the weight of the

printer is taken by the corner of the printer. If

the weight is taken by any other part of the

printer, the printer may become damaged.

●When carrying the printer, firmly grasp the

carrying grips on each side in the base (the

area shown shaded in the diagram). Holding

the printer at other positions is dangerous and

may cause injury or damage to the printer if

the printer is dropped.

●Do not hold any position other than the

carrying grips. In particular, do not hold the

plastic parts of the printer rear surface (the

area shown shaded in the diagram).

Other

●Do not put the printer down or carry the

printer with only the center of the printer

supported. This may cause damage to the

printer.

●When setting the printer down temporarily,

make sure to put the printer on a flat, stable

surface.

Installing the Printer

If you are not using the stand, install the printer in a location like the following.

Assembling the Printer Stand

Assemble the stand by referring to the Printer Stand Setup Guide (separate manual). If you are

not using the stand, proceed to "

Installing the Printer".

Attaching the Roll Unit

If you purchased the optional roll unit, attach the roll unit by referring to the Roll Unit Setup

Guide (separate manual). If you are not using the roll unit, proceed to "

Turning On the

Printer".

Removing the Packaging Material

Lift up the printer.

●For details on how to carry and the number of people, refer to

"Handling Cautions" (p. 3).

Place the printer on a stable flat location.

Remove the packaging material.

Remove all of the tape and other packaging material.

Remove the tape affixed to the roll holder.

Turning On the Printer

Open the top cover.

Pull up and remove the belt stopper.

●Keep the belt stopper for future use. You will need it in case you

move the printer to another location.

Remove the tape and protective material.

●Peel off the tape affixed to the carriage, and then pull the

protective material (the area shown shaded in the diagram)

towards you and remove it. Remove the protective sheet if there

is one attached.

Close the top cover.

Connect the power cord to the printer.

●Insert the power cord into the power connector on the rear of the printer.

For the GP-2000 For the GP-4000

Plug the power cord into the outlet, and then turn on the

printer.

When the language selection screen appears on the

touch screen, select and gently tap a language with

your finger. Then, if the screen for selecting a time zone

appears, select and tap your region.

Tap Next.

●Perform the remaining operations by following the instructions

on the screen. In the middle of these operations, there is a

choice about sending information. Read "Sending Information

To Canon" (P.15).

When a message prompting you to start the setup

appears on the touch screen, tap OK.

Installing the Ink Tanks

Instructions on ink tank installation are shown on the touch screen. Install the ink tanks as instructed. If the ink tank is cold, allow it to adjust to room temperature

before attaching it to the printer.

Open the ink tank cover.

Pull the ink tank lock lever of the

color you are installing towards you.

●Hook your finger into (A) on the back of

the handle and pull it towards you.

With it in this state, pull the ink tank

lock lever up.

Continue pulling until the entire ink tank lock lever is

tilted towards you.

●Make sure the ink tank lock lever stays in this position.

Shake each ink tank gently 7 or 8 times before opening its

pouch.

Important

●Failure to shake the ink tanks may

result in reduced print quality because

ink ingredients have settled on the

bottom of the tank.

Open the pouch and remove the ink tank.

Important

●Never touch the ink outlets or metal contacts (the area shown shaded in the diagram).

Touching these parts may cause stains, damage the ink tank, and affect print quality.

●Avoid dropping the ink tank after removing it from the pouch.

Otherwise, ink may leak and cause stains.

●Do not remove ink tanks to shake them after they have been mounted.

Doing so may cause ink to spill.

Check that the color of the ink tank is the same as the

color displayed on the label in the printer, and insert the

ink tank into the holder in the orientation shown in the

diagram.

●Insert with the ink tank label facing up and ensuring that the

text on the label is not upside-down.

Match the color of the ink tank

label to the color of the label in

the printer

Lift up the ink tank lock lever once and then push it

down.

Firmly push down the handle part of the ink tank lock

lever all the way in.

Make sure the ink lamp lights red.

Important

●If the ink lamp does not light, repeat steps 2 to 4and 8to 9.

Repeat steps 2 to 10 to install each of the ink tanks.

Close the ink tank cover.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Impresora todo en uno de Canon

Canon

Canon Color imageRUNNER C5180 Series Manual de usuario

Canon

Canon MP730 - MultiPASS Color Inkjet Manual

Canon

Canon imageRUNNER C3125i Manual de usuario

Canon

Canon iR2422 series Manual de usuario

Canon

Canon C1127iF Manual de usuario

Canon

Canon PIXMA MP470 Manual de usuario

Canon

Canon 3300B002 Manual de usuario

Canon

Canon Pixma MG2400 Series Guía de configuración

Canon

Canon TS9500 Series Manual de usuario

Canon

Canon Color imageCLASS X MF1333c Manual de usuario

Canon

Canon PIXMA MG3220 series Manual de usuario

Canon

Canon PIXMA MX410 Series Manual

Canon

Canon MultiPASSTM C50 Manual de usuario

Canon

Canon MB2000 series Guía de configuración

Canon

Canon imageRUNNER 1435 Manual de usuario

Canon

Canon PIXMA TS6000 Series Guía de configuración

Canon

Canon imageRUNNER ADVANCE C2030 Manual de usuario

Canon

Canon PIXMA MX870 Series Manual de usuario

Canon

Canon Color imageRUNNER C5185 Manual de usuario

Canon

Canon MF3110 - ImageCLASS Laser Multifunction Guía de inicio rápido

Canon

Canon PIXMA MP750 Manual de usuario

Canon

Canon PIXMA MX420 Series Manual de usuario

Canon

Canon Laser Class 700 Series Manual de usuario

Canon

Canon PIXMA MX700 Series Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario