Canon Color imageCLASS MF8170c Manual de usuario

Set-Up Instructions

Thank you for purchasing Canon Color imageCLASS MF8170c.

To get your machine ready for use, please follow the instructions in this document before referring to any other documentation.

READ THIS FIRSTREAD THIS FIRST

Unpack the machine and its components.

Check that you have the following:

●Machine

● Drum cartridge ●

Toner cartridges

(Yellow,Magenta,Cyan,Black)

●Document feeder tray

●Power cord

●Telephone cable

●USB cable

for the Machine

● Destination labels

●Manuals (Set-Up Instructions for the Machine, Set-Up

Instructions for Networking and Printing, Basic Guide,

Facsimile Guide)

●User Software CD

●Registration Card

●Limited Warranty Note

●Limited Warranty Note for EP-87 Cartridges

NOTE

●For the list of software included in the User Software CD, see the Set-Up Instructions for Networking and Printing.

●A nework cable is not included.

Remove the shipping materials.

IMPORTANT

●For important safety instructions on installation and handling of the machine, see “Important Safety Instructions”

in the Basic Guide.

1Remove all the shipping tape and foam blocks on the outside of the machine.

Document feeder tray

IMPORTANT

●Be careful not to catch your hand

when lowering the scanning platform

as it may lead to personal injury.

2 Open the document feeder and

remove the protective sheet inside.

3 Lift the platen glass cover and

remove the tape and protective

sheets on the platen glass.

5 Lift the scanning platform and

remove the tape under it.

Lower the platform carefully.

4 Remove the clear protective

sheet on the LCD display.

6 Attach the document feeder

tray on the document feeder.

Connect the telephone cable.

1 Plug the power cord into the rear socket ➊.Then connect the other end to the wall outlet ➋.

Connect the power cord.

NOTE

●The machine does not have a power switch.

2 The LCD displays INSTALL Y/M/C/K CARTRIDGE and SUPPLY REC. PAPER.The LCD returns to the standby

display when the drum and toner cartridges are installed and the recording paper loaded in the

machine (as described in the following steps).

LINEEXT

1 Connect the supplied cable to the

(LINE) jack. Then connect the

other end to the telephone line

jack on your wall.

2 Connect an extension telephone

or answering machine to the

(EXT.) jack (optional).

•Telephone or answering machine

•Telephone and answering machine

Connect external devices as follows:

Telephone

line

Telephone or

answering machine

Telephone

line

Answering

machine

LINE TEL Telephone

Machine

•Built-in computer modem and telephone

Telephone

line

Computer

LINE TEL Telephone

Machine

= Telephone line jack

= External device jack

2Remove the drum cartridge from the bag.

Keep the bag for storing the cartridge when

the machine needs maintenance.

1Lift the scanning platform ➊,and open the

cartridge cover ➋.

3Remove the shipping materials.

Sensors

Protective

shutter

Electrical

contacts

Electrical

contacts

4Remove the protective cover.

Drum cartridge memory

Imaging

transfer belt

5Hold the cartridge by the green handle and

insert it in the machine as far as it will go.

6Pull down the handle to set the cartridge in

place. Do not close the cartridge cover at this

point.

Install the drum cartridge.

IMPORTANT

●Do not open the protective shutter or touch the sensors, electrical contacts, cartridge memory or imaging

transfer belt on the drum cartridge.

2Rock the cartridge several times to distribute

toner inside.

1Check the color marking on the cartridge

receptacle in the machine. Remove the toner

cartridge of the same color from the bag.

Protective

cover

3Remove the protective cover.

Toner cartridge

memory

Developing roller

4Hold the cartridge on a flat stable surface with

one hand, and pull out the seal completely

with the other hand.

Electrical

contacts

Sensor

5Hold the cartridge as shown and insert it in

the machine as far as it will go.

6Close the cartridge cover and wait for the

cartridge cradle to rotate and stop, and then

open the cover again.

IMPORTANT

●Do not touch the developing roller, sensors, electrical contacts or cartridge memory on a toner cartridge.

Install the toner cartridges.

7Repeat steps 1to 6above until all four toner cartridges are installed.Then close the cartridge

cover and lower the scanning platform.

NOTE

●If an empty cartridge receptacle does not appear, close the cartridge cover and follow the steps below:

1Press [Menu] on the control panel ➝or to select <10.MAINTENANCE> on the LCD ➝press [Set].

2Press or to select <1.CHANGE CARTRIDGE> ➝press [Set] ➝<5.ALL COLORS> ➝[Set].

3Open the cartridge cover and install the remaining cartridges one by one. The cartridge receptacles should appear in this order: Y➝M➝C➝K.

Load paper.

1Pull out the paper cassette completely. 2Turn and pull out the shipping material ➊,and

press the inner plate ➋to set it on the bottom.

NOTE

●If you do not completely insert the cassette into the machine, paper jams may occur.

●Make sure the correct paper size is specified in the machine. For details, see Chapter 2,“Paper Handling,” in the Basic Guide.

3Pinch and slide the blue rear paper end guide

to match the size of paper.

Set this part

to the position

of paper size

4Pinch and slide the blue side paper end guides

to match the size of paper.

Paper limit

mark

Paper limit

mark

5Load the paper into the cassette. Make sure the

stack height does not exceed the limit mark.

Hook

6Press down the paper stack to make sure the

side edges of the stack sit below the hooks.

7Insert the paper cassette back into the

machine as far as it will go.

Set the basic fax settings.

IMPORTANT

●Before sending a fax, you MUST register the current date and time, fax number, and unit name in the machine.

NOTE

●For details on setting up the machine for the fax function, see the Facsimile Guide.

●For details on how to input characters, see Chapter 2,“Registering Information in Your Machine,” in the Facsimile Guide.

Setting the Current Date and Time:

1Press [Menu] ➊➝or ➋to select <8.TIMER SETTINGS>

on the LCD ➝ press [Set] ➌.

2Press or ➋to select <1.DATE/TIME SETTING> ➝press

[Set] ➌.

3Press or ➋to select the month, day, year, and time ➝

enter the current date and time using the numeric keys ➍.

4Press [Set] ➌➝[Stop/Reset] ➎to return to the standby display.

Setting the Basic Fax Settings:

1Press [Menu] ➊➝or ➋ to select <4.FAX SETTINGS> ➝ press [Set] ➌.

2Press or ➋to select <1.RECEIVE MODE> ➝press [Set] ➌.

3Press or ➋until the desired receive mode appears ➝press [Set] ➌.

You can select from the following:

FaxOnly:

If you use your machine to receive only faxes.

Fax/Tel:

When an extension telephone is connected to the machine as an external device, the machine

automatically switches between faxes and voice calls.Voice calls must be answered on the extension

telephone connected to the machine to prevent interference from the fax tone.

AnsMode:

If you want to receive faxes automatically and route voice calls to an answering machine connected to

the machine as an external device.

DRPD:

To distinguish between fax and voice calls by using Distinctive Ring Pattern Detection.

TONETONE

MenuMenu

SetSet

Stop/ResetStop/Reset

SYMBOLS

312

456

ABC DEF

GHI JKL MNO

PQRS TUV WXYZ

Manual:

When an extension telephone is connected to the machine, you can receive faxes by pressing

[B&W Start] before hanging up the extension telephone.

NOTE

•The DRPD mode requires subscription to a DRPD service. For more information, contact your local telephone company.

4Press or ➋to select <2.USER SETTINGS> ➝press [Set] ➌.

5Press or ➋to select <1.TEL LINE SETTINGS> ➝press [Set] ➌.

6Press or ➋to select <1.UNIT TEL NUMBER> ➝press [Set] ➌.

7Enter your fax number using the numeric keys ➍➝press [Set] ➌.

8Press or ➋to select <2.TEL LINE TYPE> ➝press [Set] ➌.

9Press or ➋to select <TOUCH TONE> or <ROTARY PULSE> ➝press [Set] ➌.

10 Press [Menu] ➊to go back one level ➝or ➋to select <2.UNIT NAME> ➝press [Set] ➌.

11 Enter the unit name using the numeric keys ➍➝press [Set] ➌.

12 Press [Stop/Reset] ➎to return to the standby display.

Congratulations! You have now completed the machine setup.

Where to go from here...

Once you have completed all steps in this document, see the Set-Up Sheet for Networking and Printing to

set up the machine for use in a network and to install driver software.

For basic operations of all functions of your machine, see the Basic Guide.

For details on sending and receiving faxes, see the Facsimile Guide.

For information on the driver software, see the Software Guide (included in the User Software CD).

For details on the network function of the machine, see the Network Guide (included in the User

Software CD).

For information on remotely monitoring and controlling machine functions through a network, see the

Remote UI Guide (included in the User Software CD).

Part no. FA7-6509 (000)

Canon and imageCLASS are trademarks of Canon Inc.

All other products and brand names are registered

trademarks or trademarks of their respective owners.

Specifications subject to change without notice.

PRINTED IN CHINA

For installation help and operational instructions, call us at:

1-800-828-4040 1-800 OK CANON

U.S.A. CUSTOMERS CANADA CUSTOMERS

NOTE

●Remember to register your machine to ensure product support. The serial number is located on the

back of the machine.

Otros manuales para Color imageCLASS MF8170c

Tabla de contenidos

Otros manuales de Impresora todo en uno de Canon

Canon

Canon imageRUNNER C4080 SERIES Manual de usuario

Canon

Canon PIXMA MP600 Manual de instrucciones

Canon

Canon ImageCLASS 2300 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual de usuario

Canon

Canon ImageRunner C2550 Manual de usuario

Canon

Canon imageCLASS D860 Manual

Canon

Canon imageRUNNER ADVANCE C9070PRO Manual de usuario

Canon

Canon Pixma MG2500 Series Guía de configuración

Canon

Canon imageCLASS MF4140 Guía de seguridad

Canon

Canon MultiPASS MP360 Guía de inicio rápido

Canon

Canon PIXMA MG2920 Manual de usuario

Canon

Canon IMAGE RUNNER C9065 PRO Manual de usuario

Canon

Canon PIXMA G7050 Manual de usuario

Canon

Canon MultiPASS F50 Manual de usuario

Canon

Canon PIXMA MP130 Manual de usuario

Canon

Canon ImageRunner 4051 Instrucciones de montaje

Canon

Canon PIXMA MP150 Manual

Canon

Canon imageRUNNER C3025i Manual de usuario

Canon

Canon imageRUNNER ADVANCE C9075S PRO Manual del propietario

Canon

Canon IMAGERUNNER ADVANCE C5051 Manual de instrucciones

Canon

Canon FAXPHONE L170 Manual

Canon

Canon MultiPASS F60 Manual de usuario

Canon

Canon MF657Cdw Manual de usuario

Canon

Canon PIXMA MP140 Series Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario