Cannon 1907000 Manual de usuario

Adjustable Dual Axis Rod Holder Shown

ROD HOLDER & DOWNRIGGER

TROLLING SYSTEM

CAUTION:

READ THIS MANUAL CAREFULLY

BEFORE OPERATING YOUR

NEW CANNON ACCESSORY.

RETAIN FOR FUTURE REFERENCE. NOTE: Do not return your CANNON accessory to your

retailer. Your retailer is not authorized to repair or re-

place this unit. You may obtain service by:

• calling CANNON at 1-800-227-6433;

• returning your accessory to the Factory Service Center;

121 Power Drive, Mankato, MN 56001

Please include proof of purchase and purchase date for

warranty service with any of the above options.

Owner’s Manual

Rod Holders:

ANGLED FIXED MOUNT

Adjustable Single Axis

Adjustable Rail Mount

Adjustable Clamp Mount

Adjustable Dual Axis

Adjustable Downrigger Mount

(METALLIC)

Adjustable Downrigger Mount

(BlACK)

1907000

1907001

1907020

1907021

1907002

1907022

1907023

1907002 Adjustable – Dual Axis Rod Holder

The Adjustable – Dual Axis Rod Holder is 10 inches in length and has 6 lock-

ing positions up and down with 360°rotation. Pistol grip release provides quick one

hand up and down angle adjustment with 360°rotation with the push of the release

button. Ratcheting adjustment system allows you to pull the rod holder straight up

for rod removal. Clear anodized aluminum is used for strength and corrosion resis-

tance and a UV resistant cap protects the finish of the rod and reel. This Adjust-

able Rod Holder is compatible with Cannon, Bert’s, and Traxstech track systems.

1907001 Adjustable – Single Axis Rod Holder

1907020 Adjustable – Rail Mount Rod Holder

1907021 Adjustable – Clamp Mount Rod Holder

The Adjustable – Single Axis Rod Holder is 10 inches in length and has 6 locking

positions up and down. Pistol grip release provides quick one hand up and down angle adjust-

ment while the ratcheting adjustment system allows you to pull the rod holder straight up for

rod removal. Adjustments can be made side to side by forty five degrees using the adjustable

thumb screws in conjunction with an aluminum track. Clear anodized aluminum is used for

strength and corrosion resistance and a UV resistant cap protects the finish of the rod and

reel. The Adjustable Rod Holder is compatible with Cannon, Bert’s, and Traxstech track sys-

tems.

Also available pre assembled to 1 1/4 inch rail mount and Clamp Mount.

Rod Holder Models & Features

1907000 Angled – Fixed Mount Rod Holder

The Angled - Fixed Mount Rod Holder is 10 inches in length and has a fixed 60°

angle. Adjustments can be made side to side by forty five degrees using the adjustable

thumb screws in conjunction with an aluminum track. Clear anodized aluminum is used

for strength and corrosion resistance and a UV resistant cap protects the finish of the rod

and reel. The Angled Rod Holder is compatible with Cannon track systems.

1904000 Deck Mount

The Cannon Deck Mount plate is a four inch by three inch clear

anodized aluminum plate which allows the hard mounting of Cannon Dual

Axis Rod Holders. The plate comes with a black protective mounting boot

and all mounting hardware.

1904015 Rail Mount 3/4” to 1-1/4”

1904016 Rail Mount 1-1/4” to 2”

Cannon Rail Mounts allow for the mounting of Cannon Single and Dual

Axis Rod Holders to round or square rail. Two sizes are available for round and

square tube styles. Components are made from clear anodized aluminum and

stainless steel for strength and corrosion resistance.

1904020 Clamp Mount

Cannon Rail Mounts allow for the mounting of Cannon single and

dual axis rod holders to any transom or allowable clamping edge.

Clamp opens to two and a half inches and is made from clear anodized

aluminum and stainless steel for strength and corrosion resistance.

1907022 Adjustable – Downrigger Mount Rod Holder - Metallic

1907023 Adjustable – Downrigger Mount Rod Holder - Black

The Adjustable – Dual Axis Rod Holder is also available on a Cannon

downrigger mount in a metallic or black finish (metallic finish shown right).

1904005 Pedestal Mount Track 12”

1904006 Pedestal Mount Track 18”

The pedestal mounting track is three inches high and allows for

mounting of Cannon’s track system accessories. Pedestal can be sur-

face mounted or slid into mounting track for a variety of mounting posi-

tions and easy removal. The system is compatible with Cannon, Bert’s,

and Traxtech track system products. Components are made from clear

anodized aluminum and stainless steel for strength and corrosion resis-

tance. Mounting hardware is included. Pedestal is available in twelve

and eighteen inch track lengths for mounting up to three track system rod holders.

1904010 Gimbal Mount Track – Side Gunnel

1904011 Gimbal Mount Track – Stern

Cannon’s Gimbal Mount Track allow for mounting of Cannon’s

track system accessories in flush mount rod holders. Thirty degree an-

gled gimbals have twelve inch tube length with an outer diameter of 1-1/2

inches. Eighteen inches of track allow for mounting up to three track

system rod holders. The system is compatible with Cannon, Bert’s, and

Traxtech track system products. Components are made from clear ano-

dized aluminum and stainless steel for strength and corrosion resistance.

1904025 Aluminum Mounting Track 6”

1904026 Aluminum Mounting Track 12”

1904027 Aluminum Mounting Track 18”

1904028 Aluminum Mounting Track 24”

1904029 Aluminum Mounting Track 36”

Cannon tracks allow for flexible mounting positions and easy

removal of Cannon’s track system accessories. Locking grooves allow

thumb screws to index with track and prevent accessories from twisting.

The system is compatible with Cannon, Bert’s, and Traxtech track sys-

tem products. Components are made from clear anodized aluminum

and stainless steel for strength and corrosion resistance. All mounting

hardware included. Available in 6, 12, 18, 24, and 36 inch lengths.

1904030 Fixed Base Downrigger Pedestal 4”

1904031 Fixed Base Downrigger Pedestal 6”

Cannon’s fixed base downrigger pedestals

can be surface mounted or track mounted for a vari-

ety of mounting positions and easy removal. The

3/4” thick aluminum top plate is pre-drilled and

tapped for mounting Cannon downriggers as well as

most Scotty®, Big Jon®, Penn®, Vector, Proos,

Fishlander and Walker downriggers. Components are made from clear ano-

dized aluminum and stainless steel for strength and corrosion resistance. The

fixed base downrigger pedestals are compatible with Cannon, Bert’s, and

Traxstech track systems. Available in 4” and 6” heights.

CAUTION:

The Cannon Pedestal

Mount is intended for

use with a Track that is

mounted directly to the

deck of the boat ONLY.

Replacement Parts

Rod Holder \ Accessory Compatibility

Mounts

Rod Holde r

●

- Compatible

○

- Not Compatible * - Compatible with removal of track mount plate

Adjustable Dual Axis

Track Mount Gimbal Track Mount Pedestal Track Mount

●●●

Angled Fixed Mount

Adjustable Single Axis

Rail Mount Clamp Mount Deck Mount

●●●○○○

●

○

●●●●

●

1904032 Swivel Base Downrigger Pedestal 4”

1904033 Swivel Base Downrigger Pedestal 6”

Cannon’s swivel base downrigger pedestals can be surface

mounted or track mounted for a variety of mounting positions and easy re-

moval. With 16 locking points, these downrigger pedestals allow for 360°

downrigger rotation with locking points every 22.5°. The 3/4” thick aluminum

top plate is pre-drilled and tapped for mounting Cannon downriggers as well

as most Scotty®, Big Jon®, Penn®, Vector, Proos, Fishlander and Walker

downriggers. Bearing system ensures smooth swivel action even while a

downrigger weight is attached. Components are made from clear anodized

aluminum and stainless steel for strength and corrosion resistance. The

swivel base downrigger pedestals are compatible with Cannon, Bert’s, and

Traxstech track systems. Available in 4” and 6” heights.

Mounts

Pedes tal

○○●

6" Sw ivel Mount

●○○

●

- Compatible

○

- Not Compatible

4" Sw ivel Mount

Track Mount Gimbal Track Mount Pedestal Track Mount

●○○

4" Fixed Mount

6" Fixed Mount

Rail Mount Clam p Mount Deck Mount

●○○○○●

○○●

●○○○○●

Pedestal Mount \ Accessory Compatibility

Part Part Number Description USED ON

3396562 END CAP 1904005, 1904006, 1904010, 1904018, 1904025,

1904026, 1904027, 1904028, 1904029

3390210 VINYL CAP 1907000

3393413 THUMB SCREW 1907000, 1907001, 1907002, 1904005, 1904006

3391515 CAP ROD HOLDER 1907001, 1907002, 1907020, 1907021, 1907022,

1907023

33986110 WEAR TIP 1907001, 1907002, 1907020, 1907021, 1907022,

1907023

WARNING: This product contains chemical(s) known to the state of California to cause cancer and/or reproductive toxicity.

Product protected by United States Patent number des. D573685, D573686, D574920

Form No. 3397120 Rev D

Johnson Outdoors, Inc. / Cannon Division

121 Power Drive, Mankato, MN 56001

1-800-227-6433

CANNON®LIMITED WARRANTY

Johnson Outdoors Inc. warrants to the original purchaser that the accompanying product (see exclusions below) is free from

defects in material or workmanship for a period of one (1) year from the date of purchase. Within the warranty period, Johnson

Outdoors Inc. will, at its option, either repair or replace same without charge (but no cash refunds will be made). The unit must be

returned, prepaid and with proof of the date of purchase to the following:

●Johnson Outdoors, Inc Cannon Division, 121 Power Drive, Mankato, MN 56001

This limited warranty may be enforced only by the original purchaser; all subsequent purchasers acquire the product "as is" with-

out any benefit of this limited warranty. Repair or replacement of the product as set forth in this limited warranty shall be the origi-

nal purchaser’s sole and exclusive remedy and Johnson Outdoors Inc.’s sole and exclusive liability for breach of this warranty.

EXCLUSIONS

This warranty does not apply in the following circumstances:

• When the product has been connected, installed, combined, altered, adjusted, serviced, repaired, or handled in a manner

other than according to the instructions furnished with the product

• When a serial number has been defaced, altered, or removed

• When any defect, problem, loss, or damage has resulted from any accident, misuse, negligence, carelessness, or abnormal

use, or from any failure to provide reasonable and necessary maintenance in accordance with the instructions of the owner's

manual

LIMITATION AND EXCLUSION OF IMPLIED WARRANTIES AND CERTAIN DAMAGES

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THESE LIMITED WARRANTIES. JOHNSON OUTDOORS INC.

DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES, AND IN NO EVENT SHALL ANY IMPLIED WAR-

RANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, EX-

TEND BEYOND ONE YEAR FROM THE DATE OF PURCHASE. THIS WRITING CONSTITUTES THE ENTIRE AGREEMENT

OF THE PARTIES WITH RESPECT TO THE SUBJECT MATTER HEREOF; NO WAIVER OR AMENDMENT SHALL BE VALID

UNLESS IN WRITING SIGNED BY JOHNSON OUTDOORS INC.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of consequential dam-

ages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also

have other rights that vary from state to state.

To download product manuals or purchase Cannon products from an authorized dealer, please visit our web page at www.cannondownriggers.com

Otros manuales para 1907000

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de pesca de Cannon

Cannon

Cannon 2450163 Manual de usuario

Cannon

Cannon EASI-TROLL /E Manual de usuario

Cannon

Cannon Uni-Troll 10 Manual de usuario

Cannon

Cannon DIGI-TROLL 10 Manual de usuario

Cannon

Cannon Magnum 10 STX TS Manual de usuario

Cannon

Cannon DIGI-TROLL 5 Manual de usuario

Cannon

Cannon MAG 20DT Manual de usuario

Cannon

Cannon UNI-TROLL 10 STX-TS Manual de usuario

Cannon

Cannon OPTIMUM TS Manual de usuario

Cannon

Cannon DIGI-TROLL 5 Manual de usuario

Cannon

Cannon EASI-TROLL ST Manual de usuario

Cannon

Cannon Easi-Troll Manual de usuario

Cannon

Cannon OPTIMUM Manual de usuario

Cannon

Cannon Digi-Troll IV Manual de usuario

Cannon

Cannon Uni-Troll 10TS Manual de usuario

Cannon

Cannon MAGNUM 5 Manual de usuario

Cannon

Cannon MAG 20DT/HS Manual de usuario

Cannon

Cannon Mag 20 Dt/Hs Manual de usuario

Cannon

Cannon Magnum 5 ST Manual de usuario

Cannon

Cannon DIGI-TROLL 10 Manual de usuario

Cannon

Cannon MINI-TROLL 1901200 Manual de usuario

Manuales populares de Equipo de pesca de otras marcas

Kongsberg

Kongsberg Simrad SY50 Manual de usuario

Jiffy

Jiffy Pro4 Lite Manual de usuario

Fishmaster

Fishmaster Pro Series Guía de inicio rápido

MIVARDI

MIVARDI Carp Scout XL Manual de usuario

FLAJZAR

FLAJZAR FISHTRON CatFish TX3 Manual de operación y mantenimiento

Milwaukee

Milwaukee 2873-20 Manual de usuario

VEXILAR

VEXILAR FL-8SLT Manual de usuario

Fishmaster

Fishmaster Casting Platform Guía de inicio rápido

Marcum Technologies

Marcum Technologies PanCam Manual de usuario

Harmony

Harmony SlideTrax 8023061 Manual de usuario

Quantum

Quantum Baitcast Reel Manual de usuario

K-Drill

K-Drill Ice Auger Manual de usuario

FISHING SPECIALTIES

FISHING SPECIALTIES Bowducer Manual de usuario

Fox

Fox Receiver Manual de usuario

Abu Garcia

Abu Garcia REVO MGX Manual de usuario

Daiwa

Daiwa TanacomBull 1000 Manual de usuario

Sealey

Sealey HP01 Manual de usuario

Eskimo

Eskimo 11608 Manual de usuario