Camos BHS-500 Manual de usuario

28
Instruction manual BHS-500 / BHS-600Instruction manual BHS-500 / BHS-600
Headset for Wireless Communication via Bluetooth Technology

1
Thank you for purchasing this product.
Please read this instruction manual thoroughly for proper usage and application before con-
necting and operating the equipment.
CAMOS owns all intellectual property rights including copyright on the instruction manual,
hardware and related software of the BHS-500 and BHS-600 which will be protected by Copy-
right Act. Without CAMOS‘s written permission, they cannot be copied, re-printed or translated
into other languages.
Designs and specifications are subject to change without prior notice.
If you find any strange occurences or malfunction in the product
or any foreign substance gets into the product, please contact
the authorized retailer where you purchased the product.
Preliminary Remarks

2
Warranty
The manufacturer would not take any responsibilty on the sales of products nor entrust the
responsibilities to the 3rd party. Product warranty shall not apply to any failure or malfunction
which results from improper maintenance, operation or unauthorized modification of the pro-
duct.
During the warranty period, Camos does not warrant the repairing of the products resulting
from any of the following circumstances:
1) Improper maintenance
2) Modification or replacement of parts in the user‘s disposition
3) Using improper power source
4) Natural disaster including flood, fire and earthquake
5) Replacement of expendable parts
The warranty only covers the manufactured goods. If there are any repairs after the warranty
period is finished, the repairs will be charged to the user. Please contact the distributor and
service center for A/S.

3
Important warnings
Do not use the product in a bathtub. Do not pull the plug with wet hands.
This may cause an electric shock.
Do not use unapproved power voltage.
This may cause fire or electric shock.
Do not use a damaged electric cord.
This may cause fire and (or) electric shock.
Be careful when thunder and lightening occurs.
There is a danger of electric shock.
Do not attempt to open, disassamble or repair the product by any person except an authori-
zed service dealer.
This may cause an electric shock and/or malfunction. You should request an authorized
service dealer for any inspection and repair of the product.
Do not put pins or needles into the product or the electric cord of the product.
If this happens, stop the operation of the product immediately. Continous use may cause
fire, electric shock and/or malfunction.
Stop using the product immediately when you drop it or damage the outside shell.
Continous use may cause fire, electric shock and/or malfunction.
Often clean the product.
Dust in the area may cause fire.
Safety Rules

4
FCC compliance Information
This device complies with part 15 of FCC Rules. The operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received.
Including interference that may cause undesired operation.
User information
This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio Frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an unauthorized change or modification is made.
Hereby, CAMOS Co.Ltd., declares that this BHS-500 and BHS-600 are in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Regulatory Information

5
Introduction
Box content 6
Recharge battery 7
Function overview 8
Product description 9
Key functionalities 10
LED Signals 12
Headset mounting/dismounting 14
Settings
Headset power on/off 15
Headset registrations & connections 16
Functions
BHS-500 & 600
Accept call 20
Make a call 20
Play music 22
Content
BHS-600
Intercom functionality 23
Intercom functionality during
listening to music 23
Making a call during
listening to music 24
Making a call during intercom
conversation 26
Appendix
Battery recharge time 26
Headset specifications 27

6
Headset Box Bracket A
with tape Bracket B
with clip
Box content
Recharger 5V
Earphones
1 microphone for Full-face helmet
1 microphone for Jet/Flip-up helmet
Additional:
Instruction manual
Double-sided adhesive tape
Introduction

7
Recharge battery
The original headset is equipped with a Li-Polymer rechargable battery. Before using the
headset for the first time, completely recharge the battery. The recharge time of the battery is
two hours.
1) Charging
Only recharge the unit with the included 5V recharger. Connect the headset to the charge
socket. The red LED will shine during recharging process.
2) End of recharging process
Recharge the battery for 2 hours. If the battery is full, the red light disappears automatically
Now disconnect the recharger from the headset box.
3) Empty battery signal
If the battery is almost empty, a signal will be heard. The signal disappears as soon as the
headset is connected to the recharger.
Only use the recharger included in the package! Other rechargers could damage the unit and
could result in a loss of guarantee.

8
Function overview
The unit includes the following functions:
Telephone functions
• Automatic call detection
• Redialing
• Re-direct call to headset
• Voice dialing / VOX
• Finish call
• Adjust volume
Music functions
• Play music
• Stop music
• Adjust volume
Talk/Intercom functions (nur BHS-600)
• Intercom functionality between driver &
passenger
• Call acceptance during intercom func-
tionality; at incoming call, the intercom
functionality will be muted automatically
• Interrupt intercom functionality
• Start intercom functionality

9
Product description
Green LED
(only BHS-600)
„+“ Key
„-“ Key
Red LED
TALK-Key
Pairing Switch5
(CH1/CH2, only BHS-600 )
Master/Slave Switch
(only BHS-600)
DC 5V
Bracket A
Bracket B
Reset-Key
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
















