Cameo CFP-200 Manual de usuario
Cameo Proclain Furnace
Operator's Manual
Model: CFP-200
Cameo Porcelain Furnace
Ideal diagnosis and treatment experience
Chapter 1 Safety Information 03
1.1 Key Contents 03
1.2 How to use and keep this manual? 07
Chapter 2 Safety Maintenance and Precautions 08
2.1 Installation location 08
2.2 Idle mode 08
2.3Installation and use 08
2.4 Cleaning 09
2.5 Precautions for vacuum pump installation: 10
2.6 Active cooling fan 10
2.7 Automatic temperature regulation 10
Chapter 3 Furnace Introduction 11
3.1 Cameo CFP-200 Proclain Furnace 11
3.2 Features 11
3.3 Software 11
3.4 Technical parameters 12
3.5 Packing List 13
Chapter 4 Operation Guidance 14
4.1 Main interface 14
4.2 Quick curve selection interface 16
4.3 First-stage ring interface 16
4.4 Two-stage ring interface 17
4.5 Conrm the ring interface and exit it 17
Table of Contents
4.6 Curve Program Choose Screen 18
4.7 Curve parameters setting screen 18
4.8 Abnormal reminder of parameters setting 19
4.9 Function setting screen 20
4.10 Vacuum test 20
4.11 Vacuum test interface 21
4.12 Temperature calibration function 22
4.13 Standby temperature setting 23
4.14 Sleep mode interface 24
4.15 Furnace cleaning 24
4.16 System setting 25
4.17 Furnace self-check 26
4.18 Language setting 27
4.19 Device information 27
4.20 Abnormal alarm 28
Chapter 5 Warranty terms 30
＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞
| Aidite
01
Disclaimer
Disclaimer
The information contained in this manual belongs to Aidite（Qinhuangdao）Technology Co., Ltd. and
is only intended for users. Without our written permission, any part of this manual are not allowed to be
duplicated, stored or disseminated in an electronic, mechanical, photocopying or recording way. Because
this manual has been prepared with great care, the publisher declares that it is not liable for errors and
omissions in this manual and losses caused by the use of the information contained therein.
Aidite（Qinhuangdao）Technology Co., Ltd reserves the right to change without further notice. For this
manual and the product it describes, we are neither liable for technical or editorial errors and omission,
nor for accidents and losses arising out of the use of this manual.
This manual is made by Aidite（Qinhuangdao）Technology Co., Ltd. to the best of its ability, and only
for reference. Because we are not able to predict all possible situations, this manual does not include all
technical and safety information. If you have any questions during installation, conguration and use,
please contact us.
Foreword
Dear Users:
Firstly, thank you for purchasing our product! Please conrm the furnace according to the order, invoice
and the serial number directly installed in the furnace. The production processes of all products in the
table of contents all conform to high-quality control procedures, which are under strict control from order
processing to after-sales technical service, ensuring the product quality standards.
We will provide users with free service of the entire furnace (except for man-made damage), if the
product is damaged due to quality problems and cannot work normally within 12 months from the
date of delivery, on the premise of observing relevant requirements of storage, use, installation and
transportation. We will continue to carry out paid lifelong maintenance according to user's requirements,
after the warranty period expires.
You must read through this manual and obey requirements contained herein because this manual
contains additional information on intended use and safe operation of the furnace. If Users follows
precautions related to this furnace in this manual, operations on this furnace are safe.
＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞
Aidite | 02
Foreword
Storage, handling, transportation, debugging, operation and maintenance of this furnace shall comply
with requirements of this manual. Before use of this furnace, relevant personnel shall read through
this manual. This manual shall be deemed as part of this furnace for proper storage until the furnace is
dismantled.
This furnace is only used for trained operation and maintenance personnel. The owner of this furnace and
all personnel responsible for use of this furnace shall ensure that the furnace is only used by competent
and designated personnel.
Operators shall be ensured to fully understand functions of the furnace and all safety and warning
information. Without permission, nobody shall operate it without any reason. All operators shall receive
training to be aware of coping with emergencies. Only personnel who are competent, and familiar with
functions and use of this furnace can install, operate and maintain it. These personnel must be aware
of foreseeable and potential hazards. Only designated, trained and appointed personnel can complete
operation, maintenance and repair of the furance. These personnel must be informed of all foreseeable
and potential risks.
Personnel who are not physically or mentally qualified shall not operate the furnace or stay near it,
otherwise, it may cause personal injury or equipment damage. For incompetent personnel who do not
comply with the requirements of this manual, perform illegal operation and maintenance of the furnace,
we do not bear any responsibility for personal injury, equipment damage and property loss caused.
We are only responsible for retaining the furnace with the same conguration installed for the rst time.
Without permission, it is forbidden to modify it. Any change of furnace conguration and structure shall
be completed by our sta or our designated personnel. For non-original supplies, we do not assume any
responsibility for personnel injuries caused by them.
The contents and drawings or pictures attached in this manual are trade secrets and shall not be copied,
duplicated, exhibited or sold.
＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞
| Aidite
03
Chapter 1 | Safety Information
Chapter 1 Safety Information
1.1 Key Contents
1.1.1
The design and construction of the furnace comply with relevant safety standards, which guarantees that
the furnace is safe under correct operation. The safety of operators are our top priority when designing
the furnace. If the operation method is wrong, the furnace is not for intended use or operated by
personnel who is lack of necessary production experience or untrained or lack of sense of responsibility,
the entire furnace has potential hazards.
1.1.2
For the safety of your personnel, please read this manual carefully and be aware of the intended use,
limitations and related potential hazards of the furnace. The hazards caused by the following situations
will be very serious:
※ Incorrect operation methods or inexperienced operators
※ Failure to comply with part or all parts of this manual
※ Incorrect installation
※ Power failure
※ Serious maintenance faults
※ Random change of data and operation
※ Use of irregular spare parts
※ Special accidents1.3 Installation and use
1.1.3
All owners of the furnace must clearly designate a person who is responsible for startup, operation and
maintenance and ensure that furnace operation can be carried out in a safe working order.
1.1.4
The operator must immediately remedy all equipment damage and changes that may damage the
furnace safety (if within his scope of responsibility), otherwise, he must immediately report the above
situation to the relevant personnel.
＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞
Aidite | 04
Chapter 1 | Safety Information
1.1.5
Non-professional personnel shall not approach the furnace, and all visitors must keep a safe distance
from the furnace.
1.1.6
It is very important to ensure that the carrying capacity of the lifting device is sucient to bear the weight
of the furnace when unloading and installing.
1.1.7
Regularly check and clean signs and other safety posters related to product safety. If they cannot be
clearly identied within a reasonable distance, new signs and posters shall be replaced.
1.1.8
Before startup of the furnace every time, check all safety mechanisms to ensure that all protective
furnaces have been installed in place and can function normally. Once the safety furnace is found
invalid/faulty, it must be replaced in time. If it cannot be replaced in time, shut down the furnace.
Before switching on the furnace, all protective mechanisms temporarily removed to facilitate start-up,
modication, repair or maintenance of the furnace must be replaced and ensure that they are in the ideal
working order.
1.1.9
Before opening the furnace, remove all dangers which threaten operators.
1.1.10
Don't open the protective cover or start maintenance work until the furnace is closed, all moving parts
are completely stopped and the furnace is xed to avoid accidental switching on (there are locking or
warning signs on the main switch).
1.1.11
Don't dismantle or change spare parts and safety mechanisms of the bypass device.
1.1.12
Don't use the furnace in a hazardous environment.
1.1.13
Ensure that your work area is well illuminated.
＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞
| Aidite
05
Chapter 1 | Safety Information
1.1.14
Use the furnace in a clean, well-ventilated and at indoor area. Protect it from lightning strikes, and do
not use it in a damp or rainy place.
1.1.15
The operating speed of the furnace must meet design requirements. Do not force the furnace or auxiliary
facilities to work.
1.1.16
Because loose coats, long hair, watches and jewelry can lead to work accidents,
※ Don't wear loose coats.
※ Wrap hair
※ Take o the watch and jewelry
1.1.17
Ensure that the workplace is clean and tidy. Dirt (such as oil and wood chips on the oor) and obstacles
will pose a threat to your safety. The most important thing is to ensure that all worktables on the furnace
are clean, because the dust on them will cause serious wear and re.
1.1.19
Post emergency phone numbers near the work area.
1.1.20
The operator shall know the location of rst-aid boxes and re extinguisher and how to use re
extinguishers in case of emergencies.
1.1.21
Two or more people must be involved in carrying or using lifting equipment to prevent physical injury,
when handling heavy parts (or furnaces).
1.1.22
Due to a high-voltage furnace in the furnace, there is an electrical hazard and special care shall be taken
in the detection and maintenance of its location. Incorrect reassembly may cause electric shock in future
use.
＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞
Aidite | 06
Chapter 1 | Safety Information
1.1.23
Do not put anything on the power cord and control cord. Place the furnace where the power cord will not
be trampled or tripped.
1.1.24
Do not plug anything into the furnace from the casing gap, otherwise it will cause re or electric shock.
1.1.25
The operator shall not leave his post without authorization when the furnace is working.
1.1.26
The allowable noise level shall depend on the current regulations and standards in the country of the
furnace owner. If the applicable noise limits are exceeded in individual cases, the furnace owner must
take additional noise suppression measures due to exceptional reasons.
1.1.27
Provide sucient maintenance to the furnace, such as lubrication and adjustment, but do not conduct
under the working condition. Installation, maintenance, cleaning and removal of the furnace can only be
carried out after the power supply is cut o, the furnace is shut down and safety protection measures are
taken.
1.1.28
Use appropriate hand tools when the furnace is tested or repaired. Before running, be sure to check
whether the tools are left in the furnace. For your own safety, never take the tools away from the furnace
when it is running.
1.1.29
Please use recommended spare parts.
1.1.30
Keep a job log to record problems encountered in faults and accidents and maintenance measures taken
by the user of the furnace for his own responsibility.
1.1.31
The user shall ensure the room and location of keeping the furnace and building and installation
methods meet safety requirements of this manual and provide enough ventilation conditions.
Tabla de contenidos
