Cameo G4 TW Manual de usuario

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D`UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D‘ USO

G4 TW

GALLERY LIGHT WITH TUNABLE WHITE LED

CLG4TW / CLG4TWWH

CONTENTS / INHALTSVERZEICHNIS / CONTENU /

CONTENIDO / TREŚĆ / CONTENUTO

ENGLISH

INFORMATION ON THIS USER MANUAL 6

INTENDED USE 6

DEFINITIONS AND SYMBOL EXPLANATIONS 6

SAFETY INSTRUCTIONS 7

INSTRUCTIONS FOR INDOOR INSTALLATION EQUIPMENT 10

INCLUDED 11

INTRODUCTION 11

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 12

OPERATION PER UNIT CONTROLLER CAMEO UNICON 14

INSTALLATION 20

FITTING THE DIRECTIONAL GRILLE, DIFFUSER AND FILTER 21

OPTIONAL ACCESSORIES 22

CARE, MAINTENANCE AND REPAIR 22

DIMENSIONS 23

TECHNICAL DATA 24

MINIMUM DISTANCE TO ILLUMINATED SURFACE 25

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS 25

DISPOSAL 25

MANUFACTURER’S DECLARATIONS 26

DEUTSCH

INFORMATIONEN ZU DIESER BEDIENUNGSANLEITUNG 27

BESTIMMUNGSGEMÄSSER GEBRAUCH 27

BEGRIFFS- UND SYMBOLERKLÄRUNGEN 27

SICHERHEITSHINWEISE 28

HINWEISE FÜR INDOOR-INSTALLATIONSGERÄTE 32

LIEFERUMFANG 32

EINFÜHRUNG 32

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 33

BEDIENUNG PER UNIT CONTROLLER CAMEO UNICON 35

MONTAGE 41

RICHTGITTER, STREUSCHEIBE UND FILTER MONTIEREN 42

OPTIONALES ZUBEHÖR 43

PFLEGE, WARTUNG UND REPARATUR 44

ABMESSUNGEN 45

TECHNISCHE DATEN 46

MINDESTABSTAND ZUR BELEUCHTETEN FLÄCHE 47

MINDESTABSTAND ZU NORMAL ENTFLAMMBAREN MATERIALIEN 47

ENTSORGUNG 47

HERSTELLERERKLÄRUNGEN 47

FRANÇAIS

INFORMATIONS SUR CE MANUEL D'UTILISATION 49

UTILISATION PRÉVUE 49

DÉFINITIONS ET EXPLICATION DES PICTOGRAMMES 49

CONSIGNES DE SÉCURITÉ 50

INSTRUCTIONS POUR L’INSTALLATION DE L’APPAREIL EN INTÉRIEUR 54

CONTENU DU CARTON 54

INTRODUCTION 55

BRANCHEMENTS, UTILISATION ET INDICATEURS 56

OPÉRATION PAR CONTRÔLEUR D'UNITÉ CAMEO UNICON 58

INSTALLATION 64

MONTAGE DE LA GRILLE DIRECTIONNELLE, DU DIFFUSEUR ET DU FILTRE 65

ACCESSOIRES EN OPTION 66

ENTRETIEN, MAINTENANCE ET RÉPARATIONS 67

DIMENSIONS 68

CARACÉRISTIQUES TECHNIQUES 69

DISTANCE MINIMALE PAR RAPPORT À LA SURFACE ÉCLAIRÉE 70

DISTANCE MINIMALE PAR RAPPORT AUX MATÉRIAUX NORMALEMENT INFLAMMABLES 70

MISE AU REBUT 70

DÉCLARATIONS DU FABRICANT 71

ESPAÑOL

INFORMACIÓN SOBRE ESTE MANUAL DEL USUARIO 72

USO PREVISTO 72

DEFINICIONES Y EXPLICACIONES DE LOS SÍMBOLOS 72

INSTRUCCIONES DE SEGURIDAD 73

NOTAS PARA LOS EQUIPOS QUE SE INSTALAN EN INTERIORES 77

CONTENIDO DEL EMBALAJE 77

INTRODUCCIÓN 77

CONEXIONES, MANDOS E INDICADORES 78

FUNCIONAMIENTO POR UNIDAD CONTROLADOR CAMEO UNICON 80

INSTALACIÓN 86

MONTAJE DE LA REJILLA DIRECCIONAL, EL DIFUSOR Y EL FILTRO 87

ACCESORIOS OPCIONALES 88

CUIDADO, MANTENIMIENTO Y REPARACIÓN 89

DIMENSIONES 90

DATOS TÉCNICOS 91

DISTANCIA MÍNIMA A LA SUPERFICIE ILUMINADA 92

DISTANCIA MÍNIMA A MATERIALES NORMALMENTE INFLAMABLES 92

RECICLAJE 92

DECLARACIÓN DEL FABRICANTE 93

POLSKI

INFORMACJE NA TEMAT NINIEJSZEJ INSTRUKCJI OBSŁUGI 94

ZAMIERZONE ZASTOSOWANIE 94

DEFINICJE I OBJAŚNIENIA SYMBOLI 94

INSTRUKCJE BEZPIECZEŃSTWA 95

INSTRUKCJE DLA URZĄDZEŃ MONTOWANYCH W POMIESZCZENIACH 99

ZAWARTOŚĆ OPAKOWANIA 99

WPROWADZENIE 100

PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 101

OPERACJA NA JEDNOSTCE STERUJĄCEJ CAMEO UNICON 103

INSTALACJA 109

MONTAŻ KRATKI KIERUNKOWEJ, NAWIEWNIKA I FILTRA 110

AKCESORIA OPCJONALNE 111

PIELĘGNACJA, KONSERWACJA I NAPRAWA 112

WYMIARY 113

DANE TECHNICZNE 114

MINIMALNA ODLEGŁOŚĆ OD OŚWIETLANEJ POWIERZCHNI 115

MINIMALNA ODLEGŁOŚĆ OD MATERIAŁÓW NORMALNIE ŁATWOPALNYCH 115

UTYLIZACJA 115

DEKLARACJE PRODUCENTA 116

ITALIANO

INFORMAZIONI SU QUESTO MANUALE DI ISTRUZIONI 117

USO PREVISTO 117

DEFINIZIONI E SPIEGAZIONI DEI SIMBOLI 117

ISTRUZIONI DI SICUREZZA 118

ISTRUZIONI PER LE APPARECCHIATURE DA INSTALLARE IN INTERNI 122

CONTENUTO DELL’IMBALLAGGIO 122

INTRODUZIONE 122

CONNESSIONI, ELEMENTI DI COMANDO E DI VISUALIZZAZIONE 123

FUNZIONAMENTO PER UNITÀ CONTROLLER CAMEO UNICON 125

INSTALLAZIONE 131

MONTAGGIO DELLA GRIGLIA DIREZIONALE, DEL DIFFUSORE E DEL FILTRO 132

ACCESSORI OPZIONALI 133

CURA, MANUTENZIONE E RIPARAZIONE 134

DIMENSIONI 135

DATI TECNICI 136

DISTANZA MINIMA DALLA SUPERFICIE ILLUMINATA 137

DISTANZA MINIMA DA MATERIALI NORMALMENTE INFLAMMABILI 137

SMALTIMENTO 137

DICHIARAZIONI DEL PRODUTTORE 138

DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX /

CONTROL DMX / STEROWANIE DMX / CONTROLLO DMX 139

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

ENGLISH

You have made the right choice!

This device has been developed and manufactured to the highest quality standards to ensure

many years of problem-free operation. Please read this user manual carefully to be able to use

your new Cameo product quickly and optimally. Further information about Cameo Light is availab-

le on our website CAMEOLIGHT.COM.

INFORMATION ON THIS USER MANUAL

• Carefully read the safety instructions and the entire manual before operating the device.

• Observe the warnings on the device and in the user manual.

• Always keep the user manual within reach.

• If you sell or pass on the device, it is important that you also include this user manual, as it is

an integral part of the product.

INTENDED USE

This product is a spotlight for permanent installation!

This spotlight is intended exclusively for professional users and is not suitable for private house-

holds or third parties!

Use of the product outside the specified technical data and operating conditions, as well as incor-

rect installation, is considered inappropriate!

Liability for damage and third-party damage to persons and property due to inappropriate use is

excluded!

The product is not suitable for:

• Use by persons (including children) with limited physical, sensory or mental abilities or lack of

experience and knowledge.

• Children (children must be instructed not to play with the device).

DEFINITIONS AND SYMBOL EXPLANATIONS

1. DANGER: The word DANGER, possibly in combination with a symbol, indicates immediately

dangerous situations or conditions for life and limb.

2. WARNING: The word WARNING, possibly in combination with a symbol, indicates potentially

dangerous situations or conditions for life and limb.

3. CAUTION: The word CAUTION, possibly in combination with a symbol, is used to indicate situa-

tions or conditions that may lead to injury.

4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, refers to situations

or states that can lead to damage to property and/or the environment.

This symbol identiﬁes hazards that can cause electric shock.

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

This symbol identiﬁes hazardous areas or hazardous situations.

This symbol indicates hazards caused by hot surfaces.

This symbol indicates hazards caused by intense light sources.

This symbol indicates a device in which there are no user-replaceable parts.

This symbol indicates additional information on the operation of the product.

This symbol indicates a device that may only be used in dry rooms.

SAFETY INSTRUCTIONS

HAZARD:

1. Do not open or modify the unit.

2. If your device no longer functions properly, if liquids or objects get inside it or if it

has been damaged in any other way, switch it off immediately and disconnect it

from the mains. The device may be repaired only by authorised repair technicians.

3. For devices of protection class 1, the protective conductor must be connected

correctly. Never disconnect the protective conductor. Devices of protection class 2

do not have a protective conductor.

4. Ensure that live cables are not kinked or otherwise mechanically damaged.

5. Never bypass the appliance fuse.

WARNING:

1. The device may not be operated if it shows obvious signs of damage.

2. The device may only be installed in a voltage-free state.

3. If the mains cable of the device is damaged, do not operate the device.

3. Permanently connected power cables may only be replaced by a qualified person.

ATTENTION:

1. Do not operate the unit if it has been exposed to large temperature fluctuations

(for example, after transport). Moisture and condensation can damage the device.

Switch on the device only when it has reached room temperature.

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

2. Make sure that the voltage and frequency of the mains supply correspond to the

values indicated on the unit. If the device has a voltage selector switch, do not

connect the device until it has been set correctly. Use only suitable power cables.

3. To disconnect the unit from the mains at all poles, it is not sufficient to press the

on/off switch on the unit.

4. Make sure that the fuse used corresponds to the type printed on the unit.

5. Make sure that appropriate measures have been taken against overvoltage (e.g.

lightning strike).

6. Observe the specified maximum output current on units with Power Out connec-

tion. Ensure that the total current consumption of all connected devices does not

exceed the specified value.

7. Replace pluggable mains cables only with original cables.

HAZARD:

1. Danger of suffocation! Plastic bags and small parts must be kept out of reach of

persons (including children) with reduced physical, sensory or mental capabilities.

2. Danger from falling down! Make sure that the device is securely installed and will

not fall down. Only use suitable stands or mounts (particularly for fixed installa-

tions). Ensure that accessories are properly installed and secured. Ensure that

applicable safety regulations are observed.

WARNING:

1. Use the device only in the manner intended.

2. Operate the device only with the accessories recommended and intended by the

manufacturer.

3. During installation, observe the safety regulations applicable in your country.

4. After connecting the unit, check all cable routes to avoid damage or accidents, e.g.

due to tripping hazards.

5. Always observe the specified minimum distance to normally flammable materials!

Unless explicitly stated, the minimum distance is 0.3m.

6. Always observe the minimum distance to the illuminated surface that can be read

on the device!

CAUTION:

1. In the case of moving components such as mounting brackets or other moving

components, there is a possibility of jamming.

2. In the case of units with motor-driven components, there is a risk of injury from the

movement of the unit. Sudden movement of the device can cause shock reactions.

3. The housing surface of the device can become very hot during regular operation.

Ensure that accidental touching of the housing is not possible. Always allow the

lamp to cool sufficiently before removal, maintenance work and charging etc.

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

ATTENTION:

1. Do not install or operate the device near any radiators, heat registers, stoves or

other heat sources. Ensure that the device is always installed in such a way that it

is sufficiently cooled and cannot overheat.

2. Do not place ignition sources such as burning candles near the device.

3. Ventilation openings must not be covered and fans must not be blocked.

4. Use the original packaging or packaging provided by the manufacturer for transport.

5. Avoid shock or impact to the unit.

6. Observe the IP protection class as well as the ambient conditions such as tempera-

ture and humidity according to the specification.

7. Devices can be constantly further developed. In the event of deviating informati-

on on operating conditions, performance or other device properties between the

user manual and the device labelling, the information on the device always takes

priority.

8. The unit is not suitable for tropical climates and for operation above 2000m above

sea level.

9. Unless explicitly stated, the unit is not suitable for operation in marine conditions .

For conversion or retroﬁt sets or accessories provided by the manufacturer, it is

essential to observe the instructions included.

CAUTION! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS!

1. Never look directly into the beam of light, not even for a short period of time.

2. Never look into the beam of light using optical devices such as a magnifying glass.

3. Stroboscopic effects may cause epileptic seizures in susceptible individuals!

4. Permanently installed lamps are built into these lighting units. These may not

be replaced by the user. The lamps contained in this lighting unit may only be

replaced by the manufacturer, its service partner, or a similarly qualiﬁed person.

SIGNAL TRANSMISSION BY RADIO (e.g. W-DMX or audio radio systems):

The quality and performance of wireless signal transmissions generally depends on

the ambient conditions. The following factors can impact range and signal stability,

for example:

Shielding (e.g. masonry, metal structures, water)

High volume of radio traffic (e.g. powerful wireless LAN networks)

Interference

Electromagnetic radiation (e.g. LED video screens, dimmers)

All range specifications refer to free-field application with visual contact and without

interference!

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

The operation of transmission systems is subject to official regulations. These may

vary from region to region and must be checked by the operator before use (e.g. radio

frequency and transmission power).

WARNING: Devices with wireless signal transmission are not suitable for use in sen-

sitive areas in which radio operation can lead to potential detrimental effects. These

include:

- Hospitals, health centres or other healthcare facilities that provide patient treatment

with skilled personnel and equipment.

- Hazardous areas Class I, II and III

- Restricted areas

- Military facilities

- Aircraft or vehicles

- Areas where the use of mobile phones is prohibited

TRANSMISSION VIA W-DMX

WARNING: In general, wireless DMX transmission must not be used for applications

involving safety-related factors that might result in personal injury or property dam-

age in the event of a failure.

This applies in particular to moving scene or traverse structures, DMX-controlled

motors/lifts or lifting devices for operating DMX-operated platform lifts, hydraulic

systems or comparable moving components.

Furthermore, wireless DMX transmission must not be used to trigger flame or pyro-

technic devices, explosion-driven effects, or to control gas or liquid effects. These

include CO2 cannons, confetti shooters, water effects or similar.

AMBIENT TEMPERATURE

Please observe the maximum ambient temperature in operation speciﬁed in the tech-

nical data. A special protection circuit in the headlamp ensures that the brightness

is reduced if the ambient temperature is too high to protect the unit components. If

you notice a signiﬁcant loss of brightness in the headlamp, please check the ambient

temperature in the direct vicinity of the headlamp and, if necessary, ensure that the

temperature is brought to or below the maximum permitted value.

INSTRUCTIONS FOR INDOOR INSTALLATION EQUIPMENT

1. Equipment for installation applications is designed for continuous operation.

2. Equipment for indoor installation is not weather-resistant.

3. Surfaces and plastic parts can also age in installation equipment, e.g. due to UV ir-

radiation and temperature ﬂuctuations. This generally does not impair functionality.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Equipo de DJ de Cameo

Cameo

Cameo CLTS60RGBW Manual de usuario

Cameo

Cameo CLTS40WW Manual de usuario

Cameo

Cameo G Series Manual de usuario

Cameo

Cameo STUDIO PAR 64 LED CAN Manual de usuario

Cameo

Cameo LED FLAT PAR RGBW Manual de usuario

Cameo

Cameo OPUS X PROFILE Manual de usuario

Cameo

Cameo ZENIT Z 120 Manual de usuario

Cameo

Cameo MOVOBEAM 100 Manual de usuario

Cameo

Cameo MATRIX 300 RGB Manual de usuario

Cameo

Cameo LUXIS FC CLLUXISFC Manual de usuario

Cameo

Cameo OPUS W5 Manual de usuario

Cameo

Cameo AZOR S2 Manual de usuario

Cameo

Cameo F1 FC Manual de usuario

Cameo

Cameo CLP56RGB10 Manual de usuario

Cameo

Cameo HYDRABEAM 1000 RGBW Manual de usuario

Cameo

Cameo FLAT STAR Manual de usuario

Cameo

Cameo AURO SPOT Z 300 Manual de usuario

Cameo

Cameo F4 FC Manual de usuario

Cameo

Cameo HYDRABEAM 400 Manual de usuario

Cameo

Cameo CLZW300 Manual de usuario

Cameo

Cameo ROTOFEVER Manual de usuario

Cameo

Cameo CLARA Manual de usuario

Cameo

Cameo NANOROLL 200 Manual de usuario

Cameo

Cameo FLAT MOON Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario