CAME AMICO Series Manual de usuario

AMICO SERIES

AUTOMATION FOR SWING GATES

INSTALLATION MANUAL

A1824

The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at any time without prior warning.

ENGLISH

4.1 Gate Operator

4 Description

2.1 Intended use

1 Legend of symbols

This symbol tells you to read the section with particular care.

This symbol tells you that the sections concern safety issues.

This symbol tells you what to say to the end-users.

2 Intended use and application

The A1824 operator is designed to automate swing gates used in residential or condominium settings..

The use of this product for purposes other than those described above and installation executed in a manner other

than as instructed in this technical manual are prohibited.

3 Reference Standards

“IMPORTANT INSTALLATION, SAFETY INSTRUCTIONS”

“CAUTION: IMPROPER INSTALLATION MAY CAUSE SERIOUS DAMAGE, FOLLOW ALL INSTALLATION INSTRUCTIONS CAREFULLY”

“THIS MANUAL IS ONLY FOR PROFESSIONAL OR QUALIFIED INSTALLERS”

2.2 Application

This product is engineered and manufactured by CAME cancelli automatici s.p.a. and complies with current safety regulations.

Guaranteed 24 months if not tampered with.

The gearmotor is made up of two aluminium alloy half shells housing the Encoder gearmotor – which features an electric blocking

mechanism – and an epicyclical reduction system with endless screw.

4.2 Technical features

Control board power supply: 230V A.C. 50/60Hz

Motor power supply: 24V D.C.

Max draw: 4A

Power: 100W

Adjustable thrust:400÷2000N

Opening time (90°): Adjustable

Gear ratio: 1/36

Duty Cycle: Intensive use

Protection Rating: IP44

Weight: 7,5 kg

#

#

The company CAME cancelli automatici s.p.a. is ISO 9001:2000 quality certified; it has also obtained the ISO 14001 environ-

mental safeguarding certification. Came engineers and manufactures all of its products in Italy.

This product complies with the following standards: EN 12978, UNI EN 954-1, CEI EN 60335-1, UNI EN 12453.

Length of gate leaf 1 m 1,5 m 1,8 m

Weight of gate leaf 250 kg 215 kg 200 kg

The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at any time without prior warning.

ENGLISH

4.4 Dimensions

4.3 Description of parts

A1824

1) Operator

2) Pilaster bracket

3) Gate bracket

4) Screw, bushing and nut for the pilaster

bracket

5) Bolt and nut for the gate bracket

6) Distanziale per perno attacco

(mm)











5 Installation

Before installing, do the following:

• Make sure you have suitable tubing and conduits for the electrical cables to pass through and be protected against mechanical

damage;

• Fit tubing to drain away any water leaks which may cause oxidation;

• Make sure that any connections inside the case (that provide continuance to the protective circuit) be fitted with extra

insulation as compared to the other conductive parts inside;

• Make sure the structure of the gate is sturdy, the hinges work and that the is no friction between moving and non-moving

parts;

• Make sure there is a mechanical stop for opening and closing.

Installation must be carried out by expert qualified personnel and in full compliance with current regulations.

5.1 Preliminary checks

The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at any time without prior warning.

ENGLISH

Make sure you have all the tools and materials you will need for the installation at hand to work in total safety and

compliance with the current standards and regulations. The following figure illustrates the minimum equipment needed by

the installer.

N.B.: If the cable length differs from that specified in the table, then you must determine the proper cable diameter in the

basis of the actual power draw by the connected devices and depending on the standards specified in CEI EN 60204-1.

For connections that require several, sequential loads, the sizes given on the table must be re-evaluated based on actual

power draw and distances.

When connecting products that are not specified in this manual, please follow the documentation provided with said

products.

5.3 Cable list and minimum thickness

Connections Type of

cable

Length of cable

1 < 10 m

Length of cable

10 < 20 m

Length of cable

20 < 30 m

Control panel power supply 230V

FROR CEI

20-22

CEI EN

50267-2-1

3G x 1,5 mm23G x 2,5 mm23G x 4 mm2

Motor power supply 24V 3 x 1 mm23 x 1,5 mm23 x 2,5 mm2

Flashing light 2 x 0,5 mm22 x 1 mm22 x 1,5 mm2

Photocell transmitters 2 x 0,5 mm22 x 0.5 mm22 x 0,5 mm2

Photocell receivers 4 x 0,5 mm24 x 0,5 mm24 x 0,5 mm2

Accessories power supply 2 x 0,5 mm22 x 0,5 mm22 x 1 mm2

Control and safety devices 2 x 0,5 mm22 x 0,5 mm22 x 0,5 mm2

Antenna RG58 max. 10 m

5.2 Tools and materials

1) A1824 operator

2) Control panel

3) Reception antenna

4) Flashing light

5) Selector switch

6) Photocells

7) Electric cable junction box

8) Mechanical gate stops

5.4 Standard installation

The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at any time without prior warning.

ENGLISH

Warning: after establishing the best point to which you will secure the gate bracket, secure the bracket to the pillar and make sure

the quotas shown in the table below are met.

Note: by increasing measure B, the opening angle and gate speed are reduced, while the gearmotor thrust is increased. By

increasing the measure A, the opening angle and gate speed are increases, while the gearmotor thrust is decreased.

Opening A

(mm)

90° 130 130 60

120° 130 110 50

Ideal securing

point

Gate bracketPillar bracket

Lay the corrugated tubing needed for the connections deriving from the junction box.

N.B. the number of tubes depends on the type of system and accessories employed.

The following illustrations are only examples, given that the space available for anchoring the operator and accessories

may vary from gate to gate. It is up to the installer, thus, to choose the most suitable solution.

5.5 Installing the operator

Electric cable junction box

The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at any time without prior warning.

ENGLISH





Assemble and weld the two parts of the pillar bracket. Secure the bracket to the point you have chosen with proper plugs and

screws or – if the pillar is made of metal – weld it on.

Weld the gate bracket to the gate leaf making sure the quotas shown in the table are met.

Note: on non-metal gate leaves assemble and weld the two parts of the bracket and secure them with proper screws. Secure the

Tail joint

Screw M8 x 35

Insert the bushing (lubricated) into the pillar bracket’s hole. The bracket has holes that allow the opening angle to be changed.

Secure the tail joint to the bracket.

Bushing

Nut UNI 7474 M8

The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at any time without prior warning.

ENGLISH

Attachment pin

Washer

Release the gearmotor (see paragraph on manual release), completely open the gate leaf, loosen the nuts of the opening

mechanical stop and position it up against the attachment pin, then secure it.

Open the gate leaf and insert the pin into the gate bracket.

Close the gate leaf, loosen the nuts on the closing mechanical stop, place it up against the attachment pin, then secure it.

Nut M12

Bushing

Insert the bushing into the head attachment pin.

The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at any time without prior warning.

ENGLISH

,.-.

%.#

-.

%.#

Slide open the small door that protects the release, insert the tri-lobed key and turn it.

5.6 Manual release of the gearmotor

For the electrical connection procedures, use the junction box and branching boxes.

5.7 Connecting to the control panel

Power

230V a.c. - 50/60 Hz

Connecting the 24V d.c. delayed closing

gearmotor

Connecting the 24V d.c. delayed opening

gearmotor

%.#

ZL90 Control panel

%.#

The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at any time without prior warning.

ENGLISH

5.8 Outward opening installation

Opening A

(mm)

90° 130 130 720

Weld the extra bracket to that of the pillar, secure the extra

bracket to the pillar making sure the A and B quotas are

met as shown in the table.

Open the gate to a 90° arc, weld or secure using proper

screws the gate bracket making sure the E quota is met.

Secure the gearmotor to the brackets.

Connect the gearmotors to the panel as shown in the diagram.

Pillar bracket

Extra bracket

Gate bracket

,.-.

%.#

-.

%.#

Power

230V a.c.

50/60 Hz

%.#

Extra bracket

Delayed

closing

action

Delayed

opening

action

The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at any time without prior warning.

ENGLISH

7 Safety instructions

This product must only be employed for its originally intended use. Any other use is wrong and potentially dangerous. The

manufacturer cannot be held liable for any damages resulting from wrongful, erroneous or negligent uses.

Avoid working close to the hinges or other moving mechanical parts. Stay out of the opening/closing arc when operator is in

motion.

Do not exercise force against the motion of the operator as this could result in potentially dangerous situations.

Important safety instructions

Do not allow children to play or loiter within the opening/closing arc of the operator.

Keep remote controls and any other command device out the reach of children, to prevent operator from being activated by

accident.

In the event of anomalous behaviour, stop using the operator immediately.

Danger of crushing hands

Danger of crushing feet

Danger! High voltage

No transit during operation

Otros manuales para AMICO Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Abridor de puerta de CAME

Manuales populares de Abridor de puerta de otras marcas

Elite

Elite CSW200UL Manual de usuario

SOMFY

SOMFY FX230 Manual de usuario

Aprimatic

Aprimatic ONDA 500 Manual de usuario

Turnstiles

Turnstiles FSW 900 Manual de usuario

Erreka

Erreka BUL BL33 Instrucciones de funcionamiento

Erreka

Erreka VULCAN S Manual de usuario

Beninca

Beninca R1-2 WBV Manual de usuario

Erreka

Erreka VULCAN D Manual de usuario

Motorline professional

Motorline professional FORT Manual de instrucciones

Beninca

Beninca BOB5024 Manual de usuario

AGA

AGA GATEMASTER 900 HD Manual de usuario

Chamberlain

Chamberlain MotorLift HC280ML Manual de usuario

SOMFY

SOMFY Dexxo RTS Pro Manual de usuario

Cardin

Cardin BL Series Manual de usuario

Westfalia

Westfalia 85 27 06 Manual de usuario

Extel

Extel VERA Manual de usuario

Comunello Automation

Comunello Automation ABACUS 220 Manual de usuario

Mighty Mule

Mighty Mule 200 E-Z GATE OPENER UL325 SERIES Manual de usuario