CAMBOX Horse Isi3 Manual de usuario
Cambox ISI3, MKV3, XTRM3
User manual
14/11/2022
Informations générales
2
Assistance Clientèle / Customer support
La marque Cambox s’engage à fournir le meilleur service possible à ses clients. Vous pouvez joindre notre service d’Assistance par mail à l’adresse
Cambox ensure to give the best support for customers. You can contact us by va email at [email protected] or or via our facebook pages !
or facebook messenger.
Marques et brevets déposés/Registered brands and patents
La marque CAMBOX et tous ses dérivés sont des marques déposées et protégées par les lois des marques internationales de copyright. !
Le concept de la caméra Cambox est protégé par différents brevets internationaux déposés :
The CAMBOX brand and all its derivatives are registered trademarks protected by international laws on copyright. !
The design of the Cambox camera is protected by different registered international patents : !
!
France : FR 3005714 // USA patent : US 2016:0119512!
AUS patent : AU 2014267077 // European Union : EP 2997294
Pour plus d’informations sur les marques et brevets déposés, vous pouvez nous envoyer un mail à [email protected]. TM&©2018 CAMBOX. !
Tous droits réservés.
!
For more information regarding registered brands and patents, you can send us an email at [email protected]. TM&©2018 CAMBOX. !
All rights reserved.
By
Cambox Vision, 2 rue des Ragonnières, 44330 La Chapelle-Heulin, FRANCE
3
Table of contents
Your Cambox
Quickstart guide
To start
Fasten your Cambox
Set the viewing angle
Play your content
Charge the battery
Install the mobile application
Connect your smartphone
Discover the Cambox APP
Troubleshooting
Instructions to respect
Cambox features
For more information and to access our support pages,!
please click on below button
Access to support
4
5
6
8
9
10
11
13
14
15
17
18
19
Your Cambox
1
On/Off button// RecordPause
2
3
4
5
USB socket : battery charge and files transfer
Reset button (use a clip)
Activation button of the Wifi antenna
8
9
Yellow LED : Wifi antenna enabled
Red LED : Charging in progress
7Blue LED : FullHD 1080
Memory card slot (2 to 64 Gb max)
4
Green LED : Status On, HD720
4
6
Quickstart Guide
5
To start
Turn on / Start the camera
Press the ON/OFF button for 3 seconds
6
The green (6) and the blue LED (7) turn on simultaneously indicating that the
camera is on.
Video recording starts automatically
After a few seconds, the Cambox vibrates twice
The LED starts to blink every second indicating that the video
recording is on, 2 modes are available :
Flashing blue LED"
Video record is on "
FullHD 1080 mode"
30 frames / second
Flashing green LED "
Video record is on"
HD720 mode"
60 frames / second
⚠
Before using your Cambox, be sure to check the following points :
1) The battery is fully charged
2) You have enough free space available on your memory card!
All this information is available via the application
7
To start
Pause
Press the ON/OFF button of your Cambox when it is ON. The Cambox emits 1
vibration and the LED becomes solid. !
The Cambox is paused.
Press the ON/OFF button of your Cambox when it is paused.
Relaunch the record
The Cambox emits 2 vibrations and the LED starts flashing again
every second indicating the video record is on.
Fasten your Cambox
Preparation
Before glueing, it is recommended to place the fastener under your visor
in order to memorize its future position.!
Remove meticulously the paper protection of the velcro in such a way
that your fingers do not touch the adhesive part.
The velcro fastener needs to be stored during at least 4 hours in a temperate and non moist
atmosphere to ensure maximum grip of the glue.!
!
Maker sure that the velcro fastener support is in good condition and that there is no foreign
matter that could hinder the fastening of your camera. In that case, plan the replacement of
the velcro by a new one. 8
⚠
Stick the velcro fastener
Place the velcro fastener under the visor and press strongly on all the
surface in order to ensure a good fastening
Attach your Cambox
Present the Cambox horizontally in front of
its velcro support.
Apply a pressure on the 3 Cambox points
as depicted in order to ensure a good
fastening between the 2 velcro strips.
Remove my Cambox
Grab the strap on the edge of the Cambox
wing and pull the strap upwards while doing
a circular movement towards the center of
the Cambox
Once the first wing is detached from its
velcro support, accompany the unfastening
process of the Cambox by applying the
same vertical and circular effort.
Remove the central part and apply the
vertical and circular effort towards the
extremity of the Cambox to complete the
removing operation
⚠
IMPORTANT !!
The wings of the Cambox can only be folded vertically (up to down). Make sure not to fold
them from front to back to prevent damages to the shell of your Cambox.
Check the viewing angle
9
Set the viewing angle
Adjust the lens
The central part of the Cambox has a central tipper that allows you to
modify the viewing angle on 35°. The selection of the angle is made
easy and maintained thanks to its integrated notches system.
In order to define accurately the desired viewing angle, download and
install our application on your smartphone to check in real time your
viewing angle thanks to the live preview.
⚠
During the viewing angle set up, be careful not to touch the camera lens with your fingers as
this could result in blurred or degraded images. Before every use, it is recommended to clean
the camera lens using the provided cleaning cloth.
Play your content
Via USB cable
Plug the USB cable between your Cambox and your computer, it
will automatically detect a new device.
Enable the Wifi and launch the application on your smartphone
(see P. 14).
10
Via the memory card
Push briefly on the memory card to remove it.
If you have a MicroSD card reader on your tablet or smartphone,
insert the memory card directly.
If you only have a SD reader on your computer, insert the MicroSD
in the supplied SD adapter.
Via Wifi
⚠
IMPORTANT !
Once the device is detected, you will find a disk drive where your videos and photos are
stored.
Otros manuales para Horse Isi3
2
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Cámara de acción de CAMBOX
