CAB Hermes Series Manual

Edition 8/00
Transfer Printer
Hermes
Hermes 4N / Hermes 5N
Hermes 4F / Hermes 5F
Technical Information

2 cab - Produkttechnik GmbH
copyright by cab / 900 8127 / K34 / 1
Technische Änderungen vorbehalten
In accordance with our policy of continual product improvement, we reserve the right to alter specifications without notice
Données technique modifiables sans prévais
cab-Produkttechnik
Gesellschaftfür
Computer-undAutomations-
BausteinembH&Co.KG
Postfach1904 D-76007Karlsruhe
Wilhelm-Schickard-Str.14 D-76131Karlsruhe
Telefon 0721/66 26-00
Telefax 0721/66 26-249

3cab - Produkttechnik GmbH
Thermal Transfer Printer
Technical Information
Thermal Transfer Printer
Technical Information
Hermes
All rights reserved, including those of the translations.
No part of this manual nor any translation may be reproduced or transmitted in any
form or by any means, for any purpose other than the purchaser's personal use,
without the express written permission of cab - Produkttechnik GmbH Karlsruhe.
Edition 8/00
Printed in Germany

4 cab - Produkttechnik GmbH
Table of Contents
A General Guide to the Documentation............................................................................... 6
Compliances ........................................................................................................................... 7
Trademarks ............................................................................................................................. 7
Characteristics of the Thermal Printhead ........................................................................... 8
1. Product Description ........................................................................................................ 9
General Information ........................................................................................................... 9
Important Information about Printing with Hermes ........................................................... 9
Overview of the Hermes Types ....................................................................................... 10
Overview of the Optional Features.................................................................................. 10
Technical Specifications .................................................................................................. 11
Optional Features ............................................................................................................ 14
Warning Sensor Label End / Ribbon End ................................................................. 14
Warning Light ............................................................................................................ 14
Memory Card............................................................................................................. 14
Keyboard Adapter ..................................................................................................... 14
Label Design Software EASYLABEL for Windows .................................................. 14
Print Media....................................................................................................................... 15
Print Media for Direct Thermal Printing .................................................................... 16
Print Media for Thermal Transfer Printing ................................................................ 16
Label/ Tag Media Specifications ............................................................................... 17
Transfer Ribbon......................................................................................................... 18
2. General Safety Instructions .......................................................................................... 19
3. Delivery Contents .......................................................................................................... 19
4. Printer Component Location ........................................................................................ 20
5. Connecting the Printer.................................................................................................. 28
Connection to Power Supply ........................................................................................... 28
Connection to a Computer .............................................................................................. 29
Switch on the Printer ....................................................................................................... 30
6. Media Loading ............................................................................................................... 31
Preparation of the Label Supply Hub .............................................................................. 31
Loading Labels ................................................................................................................ 32
Loading Transfer Ribbon ................................................................................................. 34
7. Adjustments Concerning the Labels ........................................................................... 35
Adjustment of the Label Edge Sensor ............................................................................ 35
Adjustment of the Printhead Support .............................................................................. 36
Adjustment of the Label Tracking.................................................................................... 37
Adjustment of the Transfer Ribbon ................................................................................. 38

5cab - Produkttechnik GmbH
8. Options ........................................................................................................................... 39
Applicators ....................................................................................................................... 39
Non-cab-Applicators.................................................................................................. 39
cab-Applicators ......................................................................................................... 40
Bracket............................................................................................................................. 42
Feet .................................................................................................................................. 44
Warning Light...................................................................................................................45
Warning Sensors ............................................................................................................. 46
Warning Sensor Label End ....................................................................................... 46
Warning Sensor Ribbon End .................................................................................... 48
9. Control Panel .................................................................................................................51
System Mode ONLINE .................................................................................................... 52
System Mode OFFLINE .................................................................................................. 52
System Mode PRINT....................................................................................................... 52
System Mode PAUSE...................................................................................................... 53
System Mode LABEL FROM CARD ............................................................................... 53
10. Setup ............................................................................................................................... 54
11. Error Messages.............................................................................................................. 56
Correctable Errors ........................................................................................................... 56
Irrecoverable Errors ......................................................................................................... 56
Appendices
Appendix A - Built-in Dimensions .................................................................................... A-1
Hermes 4N..................................................................................................................... A-2
Hermes 4F ..................................................................................................................... A-3
Hermes 5N..................................................................................................................... A-4
Hermes 5F ..................................................................................................................... A-5
Appendix B - Pin Assignment of the Interface Connectors .......................................... B-1
Pin Assignment of the Serial Interface Connector........................................................ B-1
Interface Cable for RS-232............................................................................................ B-2
Interface Cable for RS-422 / RS-485 ............................................................................ B-3
Pin Assignment of the Parallel Interface Connector ..................................................... B-4
Centronics Interface Cable ............................................................................................ B-4
Pin Assignment of the Peripheral Port for Non-cab-Applicators .................................. B-5
Appendix C - Spare Parts List (Extract)........................................................................... C-1
EC-Conformity Declaration

6 cab - Produkttechnik GmbH
A General Guide to the Documentation
Technical Information
The present manual contains beside the Technical Specification and the most
important instructions for the operator especially information for the integrators
of Hermes printers. This covers the built-in dimensions, the description of the
different interfaces and the pin assignments of the interface cables.
Note the directions for use on recommended material and the properties of the
thermal printhead in order to avoid damage and premature failure of your
Hermes .
Every effort has been made in the creation of this manual to provide as much
information as possible in an understandable manner.
We welcome your comments and suggestions regarding additions or
corrections to improve future editions of this manual. Please, let us know if you
have any questions.
Further Documentation
Complete information on the use of the Hermes printers are included in the
Operator's Manual.
The programming of the Hermes printers is completely compatible to the
programming of cab's Apollo. Therefore it is possible to use the information,
that can be found in the "Programming Instructions - Apollo".
Detailed information about service and maintenance are included in the
"Service Manual" of the Hermes.(e.g. replacement of components, adjustment
instructions, circuit diagrams, spare parts lists, etc.)

7cab - Produkttechnik GmbH
Compliances
Hermes complies with the following safety regulations :
CE : Hermes complies with the following safety requirements:
- EC Low Voltage Directive (73/23/EEC)
- EC Machinery Directive (89/392/EEC)
- EC Electromagnetic Compatibility Directive
(89/336/EEC/ foll. 93/31/EEC)
FCC : Hermes complies with the requirements of the FCC regulations part 15 for
class A computers. Under disadvantageous circumstances, the operation of
these devices may cause interference with radio or TV reception, which has to
be eliminated by the operator.
Trademarks
Centronics
® is a registered trademark of Centronics Data Computer
Corporation.
Macintosh-
Computer is a product of Apple Computer, Inc.
Microsoft
® is a registered trademark of Microsoft Corporation.
Bitstream
® is a registered trademark of Bitstream, Inc.
Speedo
™ is a registered trademark of Bitstream, Inc.
TrueType
™ is a registered trademark of Apple Computer, Inc.
Easylabel
® is a registered trademark of Tharo Systems, Inc.

8 cab - Produkttechnik GmbH
Characteristics of the Thermal Printhead
CAUTION !
The thermal printhead is the most sensitive part of your printer.
Pay special attention to the following guidelines :
1) The glass cover on the printhead must not be touched with the hand.
Do not use any sharp items, such as knives or screwdrivers, to clean
the printhead.
2) During printing, always take care that there is no dirt or foreign
objects on the labels in order to avoid impurification of the printhead.
This way, the printhead might be damaged.
3) Use proper label material with a smooth surface only.
A rough surface will affect the printhead and may cause damage and
reduce its operating life.
4) Clean the printhead regularly with a special printhead cleaning pen, or
an isopropyl alcohol soaked cotton swab.
5) Print with the lowest possible printhead temperature.
Careful use will allow you to print approximately between 18 to 30 miles
(30 to 50 km) of print media before the printhead needs replacing.
Improper usage can cause damage to the printhead.

9cab - Produkttechnik GmbH
1 Product Description
General Information
The Thermal Transfer Printers of the Hermes family are especially developed
for fully automatic labelling. Therefore the print mechanism is totaly aligned to
dispense labels. The printhead is arranged low within the devices to minimize
the way of the labels from the peel-off position to labelling position on the
product and to increase the labelling rate.
After removing the dispensed label the label strip can be fed back. So the
printing of the next label may start at the front label edge.
Hermes has two separate label transport systems for forward and backward
feed. These systems guarantee a high precision in printing and applying labels
independent from the size of the label supply roll.
The Hermes is an innovative label printer which may be used in either direct
thermal or thermal transfer mode. The programming of the Hermes is
completely compatible to the Apollo printers.
With the high-class printheads (305 dpi near edge printhead at Hermes 4N/5N
or 300 dpi flat printhead at Hermes 4F/5F) it is possible to print bar codes and
graphics quick, brilliant and tidy .
The double lined LCD display keeps the operator constantly informed about the
current status of the printer. The setup menu allows easy configuration
changes whenever desired.
The options PCMCIA-memory-card and keyboard adapter, which are offered in
the Apollo-program, may also be used for Hermes.
Important Information about Printing with Hermes
The print mode of the Hermes is designed for fully automatic labelling.
Therefore after the start of a print job Hermes needs two additional signals for
the processing of every single label :
- a start signal that releases printing and dispensing of the label
- a signal that shows the removing of the label from the peel position.
NOTICE !
If you operate Hermes with a non-cab-applicator make sure that the
applicator or the control system can generate these two signal.
A simple print mode without the "start" and the "removed" signals is not
available.
All cab applicators provide the needed signals.

10 cab - Produkttechnik GmbH
Overview of the Hermes Types
The present documentation contains the description of four different Hermes
types :
Part.-No. Description
5537500 Hermes 4N
5537501 Hermes 5N
5537503 Hermes 4F
5537506 Hermes 5F
The most important differences between Hermes types are :
- the type of the printhead
Hermes 4N/5N : Near edge printhead with 305 dpi
Hermes 4F/5F : Flat printhead with 300 dpi
-the maximum diameter of the label supply roll
Hermes 4N/4F : 7.9" / 200 mm
Hermes 5N/5F : 11.8" / 300 mm
Further the devices only will be called as Hermes, where are no differences
between the types.
Overwiew of the Optional Features
For the devices of the Hermes familiy the following optional features are
available.
Part.-No. Description
5537742 Warning Sensor Label End Hermes 4
5537743 Warning Sensor Ribbon End Hermes 4
5537744 Warning Sensor Label End Hermes 5
5537745 Warning Sensor Ribbon End Hermes 5
5537747 Warning Light
5537748 Feet Hermes 4/5
5942471 Bracket Hermes 4
5942472 Bracket Hermes 5
5533900 PC Keyboard Adapter
5560406 PC Card, 2 MB
5560405 PC Card, 4 MB
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Impresora de CAB

CAB
CAB M4 Manual de usuario

CAB
CAB A3 Manual de usuario

CAB
CAB 4114 Series Manual de usuario

CAB
CAB A Series Manual del propietario

CAB
CAB THARO Apollo Series Manual de usuario

CAB
CAB e4 Manual de usuario

CAB
CAB A8 Manual de usuario

CAB
CAB Apollo Series Manual del propietario

CAB
CAB M4 Manual de usuario

CAB
CAB A2+ Manual de usuario



























