C4Line CrossPower C4L5200-USB Manual de usuario

C4Line

CrossPower C4L5200-USB

USB-to-Powerline Manual

►COPYRIGHT & TRADEMARKS

PowerPacket, and No New Wires are registered trademarks of Intellon Corporation. HomePlug is

a registered trademark of the HomePlug Powerline Alliance. Microsoft, Windows, and the

Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and

brand names are the property of their respective proprietors.

►LIMITED WARRANTY

C4Line guarantees that every CrossPower C4L5200-USB Adapter and CrossPower

C4L5200-ETH Bridge be free from physical defects in material and workmanship for one

year from the date of purchase, when used within the limits set forth in the Specification

section of this User Guide. If the product proves defective during this warranty period,

call C4Line Technical Support in order to obtain a Return Process Information. BE SURE

TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCTS

PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED

WITHOUT PROOF OF PURCHASE. When returning a product, please include a copy of

your original proof of purchase. All customers located outside of the United State of

America shall be held responsible for shipping and handling charges.

IN NO EVENT SHALL C4LINE’S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM

DIRECT, INDIRECT SPECIAL, INCIDENTIAL, OR CONSEQUENTIAL DAMAGES RESULTING

FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS

DOCUMENTATION. C4LINE DOES NOT OFFER REFUNDS FOR ANY PRODUCT. C4Line makes

no warranty or representation, expressed, implied, or statutory, with respect to its

product or the contents or use of this documentation and all accompanying software,

and specifically disclaims its quality, performance, merchantability, or fitness for any

particular purpose. C4Line reserves the right to revise or updata its products, software,

or documentation without obligation to notify any individual or entity. Please direct all

inquires to;

C4Line 19758 Arbor Ridge Dr Walnut, CA 91789 USA

►FCC STATEMENT

The CrossPower C4L5200-USB have been tested and complies with the specifications for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used according to the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which is found by turning the

equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures;

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment or devices

• Connect the equipment to an outlet other than the receiver’s

•Consult a dealer or an experienced radio/TV technician for assistance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Caution : Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user's authority to operate the

equipment.

[ Table of Contents ]

1. Introduction

1.1 Overview

1.2 Package contents

1.3 System requirements

1.4 Applications

1.5 Usage

2. Installation Guide

Step 1 > Plan the Installation of Your Powerline Network

Step 2 > Installing C4L5200-USB Setup Utility Software

Step 3 > Using C4L5200 Configuration Utility Software

3. Specifications

Appendix A ; Troubleshooting

Appendix B : Bridges and Nodes

1.Introduction

1.1 Overview

The CrossPower C4L5200-USB is a plug-and-play USB device to network your

computers through the existing 110/220 V electric power lines and share Broadband

Internet connections, printers, transfer files, play games, and more. After successful

installation of C4L5200-USB Setup Utility Software, the powerline network behaves

like a LAN for computers.

This unit offers up to 14Mbps network speed, and is requires only 10/100Base-T

network Interface adapter which is installed on the computer. By offering 56-bit DES

encryption, it is also much more secure than other home networking technologies

such as wireless Ethernet.

This manual is intended to provide basic information to help you understand how to

successfully install C4L5200-USB to meet your networking needs.

With this guide, you should be known to

• Plan the configuration of C4L5200 devices

• Install and configure C4L5200-USB according to plan

•TestC4L5200-USBperformance

Using standard Windows applications, the user can conduct high-speed audio and

video streaming demonstrations over the powerline between 2 or more systems

equipped with C4L5200-USB and C4L5200-ETH devices.

Figure details the different use configurations of the C4L5200-USB and C4L5200-ETH

system.

1.2 Package Contents

Your package includes the following ;

CrossPower C4L5200-USB Quick Start Guide USB Cable

CD-ROM(Containing Manual, Setup and Configuration Utilities Software)

1.3 System Requirements

●Computer with an available USB interface

●At least one other powerline-enabled device (HomePlug 1.0 Compliant)

●Windows 98SE, ME, 2000 or XP

●Additional router may be required to connect multiple users

1.4 Applications

●Shared broadband internet access

●Audio and video streaming and transfer

●Expanding the coverage of wireless LANs

●Voice Over IP calls

●PC files and application sharing

●Printer and peripheral sharing

●Network and online gaming

1.5 Usage

The C4L5200-USB is to be wall mounted as shown. The description of the LED’s are given

in the Table below.

C4L5200-USB

LED FUNCTION :

DS1 POWERLINE/USB COLLISION

▪ON - Collision

▪OFF - No Collision

DS2 POWERLINE ACTIVITY

▪ON - PowerLine activity, transmit or receive

▪BLINKING - looking for more PowerLine devices

▪OFF - Device is in reset or device is not attached to AC power

DS3 POWERLINE LINK

▪ON - Another PowerLine device has been detected

▪OFF - No other PowerLine devices have been detected

DS1 COL

DS2 ACT

DS3 LNK

C4L5200-USB

2.Installation Guide

To install

Important : After receiving the C4L5200-USB, check for any shipping damages on the

carton and the system unit before proceeding with any installations. Inspect the

cartons for any obvious damage before unpacking.

Step 1 > Plan the installation of your powerline network

Note : You will need at least two powerline adapters in order to build a powerline

network connection.

1. To connect two computers together in an isolated network you will need the

following ;

●CrossPower C4L5200-USB adapter( Node mode) for each PC with an USB port

●CrossPower C4L5200-ETH adapter( Node mode) for each PC with Ethernet port

To set up files to be sharing, two things must be done.

●The computer with files to be shared must be set up for file sharing.

●The other computer on the network must be connected to that computer.

To setup a computer to share its files:

Window 98: File sharing is by default switched off. Enable file sharing by highlighting

the network adapter in the list of adapters in the “Control Panel”-> Network list.

Click the ‘File and Print sharing’ button and select file sharing. This may require your

Windows 98 installation CD.

Now to share a folder, navigate to the folder using Windows Explorer or My

Computer, right click on the folder to share, select ‘properties’ and click on the

‘Sharing’ Tab. Click ‘Shared As’ and select the type of sharing.

Window2000: Find the folder to share using Windows Explorer. Right click on the

folder and select ‘sharing’, select ‘Share this folder’.

Window XP: File sharing is by default switched off. Enable file sharing by running the

‘Network Setup Wizard’(Start->All Programs->Accessories->Communications-

>Network Setup Wizard).

Follow the instructions in the wizard and the computer will allow file sharing.

To actually share a folder, open ‘My Computer’ and navigate to the folder to share,

right click on the folder and select ‘Sharing and Security’. Click the checkbox

saying ‘Share this folder on the network’ and click ‘OK’.

To access other computers shared files:

Window 98SE: In Windows Explorer, open up ‘Network Neighborhood’ in the folder

tree and navigate to the desired folder.

Window 2000: In Windows Explorer, open up ‘My Network Places’ in the folder tree,

click on ‘Computers near me’ and navigate to the desired folder.

Window XP: In the Start menu, select ‘My Network Places’. Click ‘Add Network

Place’ in the left margin. Follow the wizard for adding the folder to look at. In the

location box where the network place is typed, type \\ name of computer to

share\ folder to share (replace names with the actual computer name and folder

name, but keep the backslashes)

2.To share a cable or DSL connection between PCs in different rooms you will need the

following;

●Cable or DSL modem

●Broadband sharing router

●CrossPower C4L5200-ETH adapter (Bridge mode) connected to the broadband

sharing router

●CrossPower C4L5200-ETH(Node mode) / C4L5200-USB(Node) adapter for PCs,

Game Boxes and peripherals you want to share the broadband connection

Using the CrossPower C4L5200-ETH(Bridge & Node mode) and C4L5200-USB(Node) to

play game remotely, to share Broadband Internet access through the whole house and

to extend the WiFi network as follows.

●Check the router manual and setup of the broadband connection.

●Connect the Ethernet cable between a LAN port on the router and C4L5200-ETH.

●Plug C4L5200-ETH into a power outlet.

●Check the ETH-LNK/ACT is on, both on the router and powerline device.

If not, check power and connections in details.

●Follow the installation procedure for the powerline adapters.

Step 2 > Installing Setup Utility Software

Please verify that no other Powerline Utilities are installed before installing this product. If

other utilities are installed, uninstall them and restart before installing this software.

●Insert the Setup utility CD-ROM into the computer’s CD-ROM drive. The setup utility

should run automatically. If it doesn’t, click the Start button and choose Run. In the box

that appears, enter D:\setup.exe (Where D is the letter of your CD-ROM drive).

☞The InstallShield Wizard will launch the Setup utility similar to that shown

Click the Next button to continue

Tabla de contenidos

Otros manuales de Adaptador de C4Line

C4Line

C4Line CrossPower C4L5200-ETH Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario