Bull Escala Power7 Series Manual de usuario

SAS subsystem for the M6-700, M6-705,

M6-715, M7-700, M7-705 or M7-715

ESCALA Power7

REFERENCE

86 A1 04FG 05

ESCALA Models Reference

The ESCALA Power7 publications concern the following models:

Bull Escala E1-700 / E3-700 (31E/2B ,8231-E2B)

Bull Escala E1-705 (31E/1C, 8231-E1C)

Bull Escala E1-715 (31E/1D, 8231-E1D)

Bull Escala E3-705 (31E/2C, 8231-E2C)

Bull Escala E3-715 (31E/2D, 8231-E2D)

Bull Escala E2-700 / E2-700T (02E/4B, 8202-E4B)

Bull Escala E2-705 / E2-705T (02E/4C, 8202-E4C)

Bull Escala E2-715 / E2-715T (02E/4D, 8202-E4D)

Bull Escala E4-700 / E4-700T (05F/6B, 8205-E6B)

Bull Escala E4-705 (05E/6C, 8205-E6C)

Bull Escala E4-715 (05E/6D, 8205-E6D)

Bull Escala E5-700 (33E/8B, 8233-E8B)

Bull Escala E5-715 (08E/8D, 8408-E8D)

Bull Escala M5-715 (09R/MD, 9109-RMD)

Bull Escala M6-700 (17M/MB, 9117-MMB)

Bull Escala M6-705 (17M/MC, 9117-MMC)

Bull Escala M6-715 (17M/MD, 9117-MMD)

Bull Escala M7-700 (79M/HB, 9179-MHB)

Bull Escala M7-705 (79M/HC, 9179-MHC)

Bull Escala M7-715 (79M/HD, 9179-MHD)

Bull Escala H9-700 (19F/HB, 9119-FHB)

References to 8236-E8C models are irrelevant.

Hardware

February 2013

BULL CEDOC

357 AVENUE PATTON

B.P.20845

49008 ANGERS CEDEX 01

FRANCE

The following copyright notice protects this book under Copyright laws which prohibit such actions as, but not limited to, copying,

distributing, modifying, and making derivative works.

Printed in France

Trademarks and Acknowledgements

We acknowledge the rights of the proprietors of the trademarks mentioned in this manual.

All brand names and software and hardware product names are subject to trademark and/or patent protection.

Quoting of brand and product names is for information purposes only and does not represent trademark misuse.

The information in this document is subject to change without notice. Bull will not be liable for errors contained herein, or

for incidental or consequential damages in connection with the use of this material.

Contents

Safety notices .................................v

SAS subsystem for the 17M/MB, 17M/MC, 17M/MD, 79M/HB, 79M/HC, or 79M/HD ....1

SAS architecture ..................................1

SAS subsystem overview ..............................1

SAS storage configurations ..............................4

SAS subsystem configuration that uses a two-way split backplane ................5

SAS subsystem configuration that uses a three-way split backplane ................6

SAS subsystem configuration that uses a dual storage IOA with internal drives ............8

SAS subsystem configuration that uses a dual storage IOA with external drives ............9

SAS subsystem service considerations ..........................12

Service considerations for the internal SAS cable for a three-way split backplane ...........12

Service considerations for the 175 MB cache RAID - dual IOA enablement card ...........13

Service considerations for the cache battery pack ......................14

Problem determination and recovery ...........................15

Notices ...................................17

Trademarks ...................................18

Electronic emission notices ..............................18

Class A Notices .................................18

Class B Notices .................................22

Terms and conditions ................................24

iii

iv SAS subsystem for the 17M/MB, 17M/MC, 17M/MD, 79M/HB, 79M/HC, or 79M/HD

Safety notices

Safety notices may be printed throughout this guide:

vDANGER notices call attention to a situation that is potentially lethal or extremely hazardous to

people.

vCAUTION notices call attention to a situation that is potentially hazardous to people because of some

existing condition.

vAttention notices call attention to the possibility of damage to a program, device, system, or data.

World Trade safety information

Several countries require the safety information contained in product publications to be presented in their

national languages. If this requirement applies to your country, a safety information booklet is included

in the publications package shipped with the product. The booklet contains the safety information in

your national language with references to the U.S. English source. Before using a U.S. English publication

to install, operate, or service this product, you must first become familiar with the related safety

information in the booklet. You should also refer to the booklet any time you do not clearly understand

any safety information in the U.S. English publications.

German safety information

Das Produkt ist nicht für den Einsatz an Bildschirmarbeitsplätzen im Sinne§2der

Bildschirmarbeitsverordnung geeignet.

Laser safety information

IBM®servers can use I/O cards or features that are fiber-optic based and that utilize lasers or LEDs.

Laser compliance

IBM servers may be installed inside or outside of an IT equipment rack.

DANGER

When working on or around the system, observe the following precautions:

Electrical voltage and current from power, telephone, and communication cables are hazardous. To

avoid a shock hazard:

vConnect power to this unit only with the provided power cord. Do not use the provided power

cord for any other product.

vDo not open or service any power supply assembly.

vDo not connect or disconnect any cables or perform installation, maintenance, or reconfiguration

of this product during an electrical storm.

vThe product might be equipped with multiple power cords. To remove all hazardous voltages,

disconnect all power cords.

vConnect all power cords to a properly wired and grounded electrical outlet. Ensure that the outlet

supplies proper voltage and phase rotation according to the system rating plate.

vConnect any equipment that will be attached to this product to properly wired outlets.

vWhen possible, use one hand only to connect or disconnect signal cables.

vNever turn on any equipment when there is evidence of fire, water, or structural damage.

vDisconnect the attached power cords, telecommunications systems, networks, and modems before

you open the device covers, unless instructed otherwise in the installation and configuration

procedures.

vConnect and disconnect cables as described in the following procedures when installing, moving,

or opening covers on this product or attached devices.

To Disconnect:

1. Turn off everything (unless instructed otherwise).

2. Remove the power cords from the outlets.

3. Remove the signal cables from the connectors.

4. Remove all cables from the devices.

To Connect:

1. Turn off everything (unless instructed otherwise).

2. Attach all cables to the devices.

3. Attach the signal cables to the connectors.

4. Attach the power cords to the outlets.

5. Turn on the devices.

(D005a)

DANGER

vi SAS subsystem for the 17M/MB, 17M/MC, 17M/MD, 79M/HB, 79M/HC, or 79M/HD

Observe the following precautions when working on or around your IT rack system:

vHeavy equipment–personal injury or equipment damage might result if mishandled.

vAlways lower the leveling pads on the rack cabinet.

vAlways install stabilizer brackets on the rack cabinet.

vTo avoid hazardous conditions due to uneven mechanical loading, always install the heaviest

devices in the bottom of the rack cabinet. Always install servers and optional devices starting

from the bottom of the rack cabinet.

vRack-mounted devices are not to be used as shelves or work spaces. Do not place objects on top

of rack-mounted devices.

vEach rack cabinet might have more than one power cord. Be sure to disconnect all power cords in

the rack cabinet when directed to disconnect power during servicing.

vConnect all devices installed in a rack cabinet to power devices installed in the same rack

cabinet. Do not plug a power cord from a device installed in one rack cabinet into a power

device installed in a different rack cabinet.

vAn electrical outlet that is not correctly wired could place hazardous voltage on the metal parts of

the system or the devices that attach to the system. It is the responsibility of the customer to

ensure that the outlet is correctly wired and grounded to prevent an electrical shock.

CAUTION

vDo not install a unit in a rack where the internal rack ambient temperatures will exceed the

manufacturer's recommended ambient temperature for all your rack-mounted devices.

vDo not install a unit in a rack where the air flow is compromised. Ensure that air flow is not

blocked or reduced on any side, front, or back of a unit used for air flow through the unit.

vConsideration should be given to the connection of the equipment to the supply circuit so that

overloading of the circuits does not compromise the supply wiring or overcurrent protection. To

provide the correct power connection to a rack, refer to the rating labels located on the

equipment in the rack to determine the total power requirement of the supply circuit.

v(For sliding drawers.) Do not pull out or install any drawer or feature if the rack stabilizer brackets

are not attached to the rack. Do not pull out more than one drawer at a time. The rack might

become unstable if you pull out more than one drawer at a time.

v(For fixed drawers.) This drawer is a fixed drawer and must not be moved for servicing unless

specified by the manufacturer. Attempting to move the drawer partially or completely out of the

rack might cause the rack to become unstable or cause the drawer to fall out of the rack.

(R001)

Safety notices vii

CAUTION:

Removing components from the upper positions in the rack cabinet improves rack stability during

relocation. Follow these general guidelines whenever you relocate a populated rack cabinet within a

room or building:

vReduce the weight of the rack cabinet by removing equipment starting at the top of the rack

cabinet. When possible, restore the rack cabinet to the configuration of the rack cabinet as you

received it. If this configuration is not known, you must observe the following precautions:

– Remove all devices in the 32U position and above.

– Ensure that the heaviest devices are installed in the bottom of the rack cabinet.

– Ensure that there are no empty U-levels between devices installed in the rack cabinet below the

32U level.

vIf the rack cabinet you are relocating is part of a suite of rack cabinets, detach the rack cabinet from

the suite.

vInspect the route that you plan to take to eliminate potential hazards.

vVerify that the route that you choose can support the weight of the loaded rack cabinet. Refer to the

documentation that comes with your rack cabinet for the weight of a loaded rack cabinet.

vVerify that all door openings are at least 760 x 230 mm (30 x 80 in.).

vEnsure that all devices, shelves, drawers, doors, and cables are secure.

vEnsure that the four leveling pads are raised to their highest position.

vEnsure that there is no stabilizer bracket installed on the rack cabinet during movement.

vDo not use a ramp inclined at more than 10 degrees.

vWhen the rack cabinet is in the new location, complete the following steps:

– Lower the four leveling pads.

– Install stabilizer brackets on the rack cabinet.

– If you removed any devices from the rack cabinet, repopulate the rack cabinet from the lowest

position to the highest position.

vIf a long-distance relocation is required, restore the rack cabinet to the configuration of the rack

cabinet as you received it. Pack the rack cabinet in the original packaging material, or equivalent.

Also lower the leveling pads to raise the casters off of the pallet and bolt the rack cabinet to the

pallet.

(R002)

(L001)

(L002)

viii SAS subsystem for the 17M/MB, 17M/MC, 17M/MD, 79M/HB, 79M/HC, or 79M/HD

Otros manuales para Escala Power7 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de Bull

Bull

Bull NovaScale T810 E1 Manual de usuario

Bull

Bull NovaScale Blade 20 Series Instrucciones de funcionamiento

Bull

Bull NovaScale 5 5 Series Manual de usuario

Bull

Bull Escala E5-700 Manual de usuario

Bull

Bull Escala Power7 Series Manual de usuario

Bull

Bull Escala E2-700T Manual de usuario

Bull

Bull novascale R480 F2 Manual de usuario

Bull

Bull NovaScale Blade B260+ Manual de usuario

Bull

Bull NovaScale Blade 2040 Series Manual de usuario

Bull

Bull Escala Power7 Series Manual de usuario

Bull

Bull NovaScale R630 E1 Manual de usuario

Bull

Bull Escala PL 1650R-L+ Manual del propietario

Bull

Bull Escala Power7 Series Manual de uso y cuidado

Bull

Bull NovaScale T840 E2 Manual de usuario

Bull

Bull NovaScale T810 F2 Manual de usuario

Bull

Bull ESCALA Power7 5886 Manual de usuario

Bull

Bull Escala EL260B Manual de usuario

Bull

Bull NovaScale Blade 2320 Manual de usuario

Bull

Bull Novascale T810E1 Manual de usuario

Bull

Bull Escala Power7 Series Manual de usuario

Bull

Bull ESCALA E250 Guía del usuario

Bull

Bull ESCALA Power7 5796 G30 Manual de servicio

Bull

Bull Escala PL 245T/R Manual del propietario

Bull

Bull Escala EPC400 Guía de inicio rápido

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario