Buckingham 20192CM Guía
BUCKINGHAM MFG.
Adjustable Body Belt Adjustment Instructions
The Buckingham adjustable body belt (Patent Pending / Stacked Four D-ring Body Belts are Patented) has been
designed with an adjustable man rated upper belt strap and an adjustable lower work positioning Dee piece that
allows the user to customize the size of their body belt.
Adjustable Belt Strap Adjustment Instructions:
To Lengthen the Adjustable Belt Strap:
1. Lay the belt on a flat surface with the belt strap facing up (Fig. 1)
2. Rotate the adjustment buckle 90° so it is perpendicular to the strap (Fig.2)
3. Feed extra webbing from top of strap through the adjustment buckle forming a slack loop (Fig. 3)
4. Pull webbing slack loop from the bottom, away from the buckle, lengthening the strap to the desired length.
5. Once adjusted, lay the buckle flat against the strap and pull excess strap towards the billet end of the belt, flattening the strap (Fig. 4)
To Shorten the Adjustable Belt Strap:
1. Lay the belt on a flat surface with the belt strap facing up (Fig. 1)
2. Rotate the adjustment buckle 90° so it is perpendicular to the strap (Fig. 5)
3. Create slack in the belt strap by pulling the billet side of the strap towards the adjustment buckle (Fig. 6)
4. Feed extra webbing from bottom of strap through the adjustment buckle forming a slack loop (Fig. 7)
5. Pull webbing slack loop from the top, away from the buckle, lengthening the strap to the desired length.
6. Once adjusted, lay the buckle flat against the strap and pull excess strap towards the billet end of the belt, flattening the strap (Fig. 8)
20192CM Adjustable Body Belt Adjustment Inst (Rev. 10/2/19) 1 of 2
PN 230417
Belt Strap Adjustment Buckle
Dee Piece
Adjustment Buckle
(located under lower strap)
section
Fig. 1
Adjustable Belt Strap
Adjustable
Dee Piece
Work Positioning
D-Ring
Work
Positioning
D-Ring
Fig. 2
Fig. 3
Fig. 4
Billet End
Buckle End
Note: hardware / material colors may vary
from that shown. (PN 20192CM shown)
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Adjustable Dee Piece Adjustment Instructions:
To Lengthen the Adjustable Dee Piece:
1. Lay the belt on its edge with the lower Dee piece facing up and away (Fig. 9)
2. Rotate the adjustment buckle 90° so it is perpendicular to the dee piece strap (Fig. 10)
3. Feed extra webbing from top of strap through the adjustment buckle forming a slack loop (Fig. 11)
4. Pull webbing slack loop from the bottom, away from the buckle, lengthening the Dee piece to the desired length.
5. Once adjusted, lay the buckle flat against the strap and pull the two work positioning D-rings away from each other, tightening and
flattening the Dee piece (Fig. 12)
To Shorten the Adjustable Dee Piece:
1. Lay the belt on its edge with the lower Dee piece facing up and away (Fig. 9)
2. Rotate the adjustment buckle 90° so it is perpendicular to the dee piece strap (Fig. 13)
3. Create slack in the Dee piece by pushing the two work positioning D-ring towards each other (Fig. 14)
4. Feed extra webbing from bottom of strap through the adjustment buckle forming a slack loop (Fig. 15)
5. Pull webbing slack loop from the top, away from the buckle, lengthening the strap to the desired length.
6. Once adjusted, lay the buckle flat against the strap and pull the two work positioning D-rings away from each other, tightening and
flattening the Dee piece (Fig. 16)
Reference Buckingham’s Body Belt Instructions / Warnings (BBPSWARN.Doc) packed with the product for further information regarding the
warnings for the Adjustable Body Belt.
Patent Pending
Stacked Four D-ring Body Belts are Patented. For more information, visit BuckinghamMFG.com/Patents.
Buckingham Mfg. Co.
Binghamton, NY
www.buckinghammfg.com
1-800-937-2825
Information contained in these written instructions supersedes all other information (written, audio, video etc.) produced by Buckingham Mfg. prior to the revision
date of this document.
20192CM Adjustable Body Belt Adjustment Inst (Rev. 10/2/19) 2 of 2
PN 230417
Dee Piece
Adjustment Buckle
(located under lower strap)
section
Buckle End
Billet End
Work Positioning
D-Ring
Work Positioning
D-Ring
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 14
Fig. 13
Fig. 15
Fig. 16
Tabla de contenidos
Otros manuales de Sensor de seguridad de Buckingham
Buckingham
Buckingham 5005S5 Manual de usuario
Buckingham
Buckingham BuckCat Series Manual del producto
Buckingham
Buckingham 102SR Series Manual del producto
Buckingham
Buckingham 101SR Manual del producto
Buckingham
Buckingham 3111 Manual de usuario
Buckingham
Buckingham K9RETRO Manual de usuario
Buckingham
Buckingham ERGOVATION Series Manual de usuario
Buckingham
Buckingham BuckTooth 485 Manual de usuario
Buckingham
Buckingham 5005TC Manual de usuario
Buckingham
Buckingham 5004BQ2 Manual de usuario
Buckingham
Buckingham 2139 Manual de usuario
Buckingham
Buckingham 17904 Manual del producto
Buckingham
Buckingham 6263 Series Manual de usuario
Buckingham
Buckingham RFPDELUXE Manual de usuario
Buckingham
Buckingham BuckSkinner Manual de usuario
Buckingham
Buckingham 60007 Manual de usuario
Buckingham
Buckingham Buck LeverJust 9M8 Series Manual de usuario
Buckingham
Buckingham 574 Manual de usuario
Buckingham
Buckingham 600071 Manual de usuario
Buckingham
Buckingham BuckAdjuster Manual de usuario
