Bubbli BBBOTLWARMA Manual de usuario

BOTTLE WARMER

BBBOTLWARMA

When using the electrical appliance, the below basic safety precautions should be followed:

• Read these instructions thoroughly before use.

• Do not discard of these instructions.

• Before using check that the voltage power corresponds to the one shown on the

appliance nameplate.

• Do not operate any appliance with a damage cord or plug or after the appliance

malfunctions or has been damaged in any manner. Contact Kogan.com for

support.

• Use the appliance on a level and stable work surface away from water.

• The food should not be heated for too long.

• Do not let the cord hang over the edge of table or counter.

• Do not place the appliance on or near a hot gas or electric burner or in a heated

oven.

• Do not operate the appliance without water, it may damage the heating element.

If you notice the appliance is dry, you should immediately unplug it from the outlet.

After cooling for 15 minutes, pour cool water in the appliance.

• Keep the power cord away from fire and sources of heat.

• While operating, be careful of the steam coming out from the top cover and do not

face directly or place any part of the body above the opening on the top cover.

• Always use mitts handling hot parts, avoid hot steam rising from the top cover at

all times while in use. After sterilising, open the top cover carefully to avoid being

scalded by steam.

• The water in the base may still be hot after the other parts of appliance cool down,

handle carefully.

• Do not touch the hot parts such as base, heating element, top cover etc. to avoid

being scalded.

• Do not to move the appliance during operation, if required, be careful to avoid

being scalded.

• The use of accessories not included with this product may cause fire, electric shock

or injury.

• Always disconnect the appliance from the power outlet if it is left unattended and

before assembling, disassembling or cleaning. Before cleaning ensure the

appliance has cooled down completely

• To p r o te c t a g a i n s t t h e r i s k o f e l e c t r i c a l s h o c k , d o n o t i m m e r s e t h e b o d y a n d b a s e i n

water or other liquids.

SAFETY & WARNINGS

• Always test the milk temperature before feeding your baby! Drip some milk onto the

wrist to test the temperature.

• This appliance can be used by children aged 3 years and above or persons with

reduced physical, sensory or mental capabilities if they have been given supervision

or instruction concerning use of the appliance in a safe way and understand the

hazards involved.

• Cleaning and user maintenance should not be performed by children under 8 years

old. Keep the appliance and its cord out of reach of children aged less than 3 years.

• Do not allow children to play with this appliance.

• This appliance is intended to be used in household and similar applications such

as:

- Staff kitchen areas in shops, offices and other working environments.

- Farmhouses.

- By clients in hotels, motels and other residential type environments.

- Bed and breakfast type environments.

OVERVIEW

To p cover

Bottom cover

Control panel

Body

Indicator

Knob

Milk bottle rack

Inner chamber

Groove

Control Panel

Functions:

1. Indicator

2. Warm milk

3. Defrost

4. Off

5. Heat food

6. Knob

7. High-temperature cleaning

Before First Use

1. Remove all packaging materials from the appliance.

2. Clean all the parts (see “CLEANING AND CARE”).

Using the Appliance

Before operating, ensure that the milk bottle warmer is unplugged and the knob is in the

“OFF” position. This appliance does not have an auto shut-off function and needs to be

manually switched off.

Defrosting:

1. Install the milk bottle rack into the inner chamber. Ensure the milk bottle rack sits

snug in the groove.

2. Place milk bottles on the milk bottle rack. A maximum of two milk bottles can be

placed into the inner chamber.

3. Fill the inner chamber with the appropriate amount of water. The water level should

align with the level of the milk in the milk bottle. Do not overfill the inner chamber.

4. Close the top cover.

5. Connect the appliance to the power outlet. Rotate the knob to the “Defrost”

setting, the corresponding indicator illuminates blue and the appliance starts

working.

6. When the indicator turns off, rotate the knob to “OFF” position.

7. Shake the milk bottle lightly and drip some milk onto the wrist to test the

temperature before feeding.

Warming milk:

1. Install the milk bottle rack into the inner chamber. Ensure the milk bottle rack sits

snug in the groove.

2. Placed milk bottles on the milk bottle rack. A maximum of two milk bottles can be

place into the inner chamber.

3. Fill the inner chamber with the appropriate amount of water. The water level should

align with the level of the milk in the milk bottle. Do not overfill the inner chamber.

4. Close the top cover.

OPERATION

Note:

Do not heat milk for too long. Refer to table in “Heating Times”.

5. Connect the appliance to the power outlet. Rotate the knob to the “Warm milk”

setting, the corresponding indicator illuminates blue and the appliance starts

working.

6. When the indicator turns off, rotate the knob to “OFF” position.

7. Shake the milk bottle lightly and drip some milk onto the wrist to test the

temperature before feeding.

Heating food:

1. Put the container (without lid) loaded with baby food into the inner chamber.

2. Fill the inner chamber with appropriate amount of water. Generally, the water level

shall align with the level of the baby food in the container. And do not overfill the

inner chamber with water.

3. Close the top cover.

4. Connect the appliance to the power outlet. Rotate the knob to the “Heat food”

setting, the corresponding indicator illuminates blue and the appliance starts

working.

5. When the indicator turns off, the appliance stops working.

6. After finish working, rotate the knob to “OFF” position.

7. Please mix the food thoroughly and test the temperature of the food before

feeding.

High-temperature cleaning:

1. Install the milk bottle rack into the inner chamber. Ensure the milk bottle rack sits

snug in the groove.

2. Put the empty milk bottle or container (without lid) on the milk bottle fixing rack.

3. Fill the inner chamber with 200ml of water. Do not overfill the inner chamber with

water.

4. Close the top cover.

5. Connect the appliance to the power outlet. Rotate the knob to “High-temperature

cleaning” setting, its corresponding indicator illuminates blue and the appliance

starts working.

6. When the indicator turns off, rotate the knob to “OFF” position.

7. Once cooled down empty the inner chamber and wipe the body with a cloth.

Note:

Do not heat milk for too long. Refer to table in “Heating Times”.

Note:

Do not heat food for too long. Refer to table in “Heating Times”.

Cautions

• Do not use mineral water in this appliance as it may cause scale to build up in the

inner chamber.

• Before removing top cover, ensure the appliance has cooled down completely.

• After completing operation, it is recommended that the appliance should rest for 10

minutes before performing another operation.

• Always test the temperature of milk or food before feeding your baby.

• Please empty all the water in the inner chamber and then refill it with fresh water

before performing another operation.

Heating Times

Setting

Milk/food amount

Temperature

Heating time

Material of milk

bottle

Defrost

150/250ml

<20°C

Approx. 30mins

PP/PPSU/Glass

Warm milk

150/250ml

40±7°C

Approx. 25mins

PP/PPSU/Glass

Heat food

150/250ml

60±7°C

Approx. 30mins

Glass

High-

temperature

Cleaning

200ml

>85°C

Approx. 30mins

1. Before cleaning, rotate the knob to the “OFF” position and unplug the appliance

and ensure it has cooled down completely.

2. Never immerse the body and base into the water for cleaning.

3. Rinse the top cover with clean water.

4. Clean the inner surface using detergent and then rinse it with clean water. Wipe

the outside surface with a wet cloth. Do not use corrosive detergent, detergent with

chemical powder or hard metal wire mesh to clean as it will damage the appliance

surface, reduce the service life and cause safety problems.

5. When not in use, clean and dry the appliance, then store it in a dry, well ventilated

area.

6. The top cover can be also used as a dust-proof cover for protecting the inner

chamber. Reverse the top cover and put it into the inner chamber.

Removal of Scale

The milk bottle warmer should be descaled regularly to assure it operate effectively.

1. Before cleaning, rotate the knob to the “OFF” position and unplug the appliance

and ensure it has cooled down completely.

2. Fill the inner chamber with white vinegar or mixture of 3-parts citric acid to 1-part

water.

3. Connect the appliance to the power outlet, rotate the knob to “High-temperature

cleaning” setting.

4. Run the appliance for 10 minutes, and then turn off the appliance and leave it until

the scale is being dissolved.

5. Empty the residual water in the inner chamber and thoroughly clean it with water.

CLEANING & CARE

Tabla de contenidos

Otros manuales de Calentador de biberones de Bubbli

Bubbli

Bubbli BBBTTLWRMRA Manual de usuario

Manuales populares de Calentador de biberones de otras marcas

Topcom

Topcom KD-4302 Manual de usuario

SEVERIN

SEVERIN BK-3177 Manual de usuario

Philips

Philips SCF355 Manual de usuario

SEVERIN

SEVERIN BK 3176 Manual de usuario

Chicco

Chicco 06867 MU Manual de usuario

Reer

Reer Multimax 2 in 1 -travel Manual de usuario

Lionelo

Lionelo Thermup Go Manual de usuario

TEFAL

TEFAL Disney Baby TD1100K0 Manual de usuario

TrueLife

TrueLife INVIO BW Single Manual de usuario

Gourmia

Gourmia JBW-250 Manual de usuario

König Electronic

König Electronic HC-BW10 Manual de usuario

Gourmia

Gourmia JBW-150 Manual de usuario

NUK

NUK MEDICPRO 10.256.467 Manual de usuario

Petra

Petra DI 6.00 Manual de usuario

Philips AVENT

Philips AVENT Electric Bottle and Baby Food Warmer Manual de usuario

babymoov

babymoov Auto Speed Bib Manual de usuario

Alecto

Alecto BW600 Manual de usuario

Lionelo

Lionelo Thermup Manual de usuario