Btwin ELOPS 920E Manual de usuario

EN - User manual

ELOPS 920E

Dear Cu󰘵omers,

Thank you for purchasing a B’TWIN electrically-assi󰘵ed bike. It will introduce you to the joys

of travelling on 2 wheels for your leisure, it will be the mo󰘵 practical and economical way for

you to get around in town and will allow you to burn calories to keep 󰘰t.

We invite you to read this in󰘵ruction manual to get the mo󰘵 out of your B’TWIN electrical-

ly-assi󰘵ed bike.

Never forget that an electrically-assi󰘵ed bike is not a moped. It needs your help to go further,

fa󰘵er and longer.

We sugge󰘵 that you learn how to use your electrically-assi󰘵ed bike in an open area in order

to get used to the feel of the motor kicking in and thus ensure optimum control of your bicycle.

Only use sport mode for your 󰘰r󰘵 kilometres if you are sure that you are able to control your

bike.

Here is what you need to do to get the mo󰘵 out of your ELOPS 920E power-assi󰘵ed bike.

Electrically assi󰘵ed bicycles are heavier than classic pushbikes. Without assi󰘵ance, pedal-

ling can be harder.

You mu󰘵 always make sure you are capable of riding the entire journey without assi󰘵ance,

in case your battery runs 󰘱at.

Important, this in󰄋ruction manual only applies to the electrical characteri󰄋ics of

your bicycle.

You should refer to the B’TWIN user manuals common to all our bicycles that ac-

company this document and are also available on our website www.btwin.com or on

reque󰄋 in our DECATHLON 󰄋ores.

10 be󰘵 practices for getting the mo󰘵 out of your electrically-assi󰘵ed bicycle.

1. You need to pedal to go further

3,5 - 5 bar

2. In order to improve battery life and e󰘲ciency, pump

the tyres to between 3.5 and 5 bar

< 3 bar

pfff

3. Under-in󰘱ated tyres are more prone to punctures

20° 5°

4. cold weather reduces battery life

5. Overloading the bicycle will reduce the battery life 6. Battery life will drop when cycling uphill

< 3 months

7. The battery mu󰘵 be fully charged at lea󰘵 once every

3 months

> mode 1 < mode 1

8. It is advisable to reduce the power assi󰘵ance mode

when the battery charge is low

9. the battery level indicator is more accurate when the

bike is at a complete 󰘵op

10. Remove the battery before conducting any mainte-

nance work

PRODUCT DESCRIPTION ............................................................................... 6

Electrically-assi󰄋ed bike technical features ..................................................................... 6

General operation of the electrical assi󰄋ance .................................................................. 6

SCREEN AND CONTROL ELEMENTS ........................................................... 7

Screen data and function .................................................................................................... 7

BATTERY AND CHARGER ............................................................................. 8

Precautions for use .............................................................................................................. 9

In󰄋alling and removing the battery.................................................................................. 11

Recharging the Battery ...................................................................................................... 12

Maintenance and lifetime (warranty conditions) ............................................................. 12

Battery self-diagno󰄋ic....................................................................................................... 13

Putting the battery into hibernation mode ....................................................................... 14

Additional precautions for use ......................................................................................... 15

Maintenance ....................................................................................................................... 16

Displays error code on the control screen ...................................................................... 17

Contents of the commercial warranty for your electrically-assi󰄋ed bike18

TABLE OF CONTENTS

PRODUCT DESCRIPTION

Electrically-assi󰄋ed bike technical features

Rear LED light

Battery

Screen beam

Screen

Gear shift aid

Front LED light

Motor wiring harness

Motor

Speed sensor + magnet

General operation of the electrical assi󰄋ance

The power-assi󰘵ed bike can be used with or without assi󰘵ance by pressing the ON/OFF button or altering the mo-

des. 0-1-2-3. Power assi󰘵ance will only work if you are pedalling, with a selected mode other than 0. Assi󰘵ance cuts

o󰘯 when the speed is above 25km/h. In case of intensive use and in exceptional climatic conditions, assi󰘵ance may

be cut o󰘯 to safeguard the whole sy󰘵em.

SCREEN AND CONTROL ELEMENTS

Screen data and function

11 7

1 13 8 9

6KM

Power assi󰘵ance mode (0-1-2-3):

»0» no power assi󰘵ance.

»1» is the default power assi󰘵ance mode.

Each mode corresponds to the maximum assi󰘵ance speeds set out below:

Mode 0 1 2 3

Maximum assi󰄋ance speeds** No assi󰄋an-

ce +50% assi󰄋ance +120% as-

si󰄋ance

+190% as-

si󰄋ance

Average autonomous range*** /50 - 90 km

2ON/OFF button:

Switch the electrically-assi󰘵ed bicycle on and o󰘯 by holding the button down for a few seconds.

Scroll through the route information (TRIP, ODO, TRIPtoGO) with a short press.

3«+» button:

Step up to the higher power assi󰘵ance mode by brie󰘱y pressing the button

Switch to «walk assi󰘵» mode by holding the button down for a few seconds.

4»-» button:

Step down to the lower assi󰘵ance mode

Lighting button

The lighting on the bicycle can be switched on and o󰘯 by brie󰘱y pressing the button

Go to the settings by holding the button down for a few seconds

6Speed indicator**

6KM

«Walk assi󰄋» mode:

For walking beside the bicycle in walk assi󰘵 mode, up to 6 km/h, without pedalling. Please note that this mode should not be used when

riding the bicycle

ODO: Records the total di󰘵ance travelled. It cannot be reset to zero.

TRIP: Records the partial di󰘵ance travelled.

TRIPtoGO: Remaining di󰘵ance that may be covered with the power assi󰘵ance mode.

BATTERY AND CHARGER

All the batteries of our electric bicycles use Lithium-Ion cell technology and have no memory e󰘯ect (the battery can be

recharged at any time; no need to wait for it to be completely discharged).

Charge the battery to 100% prior to its 󰄈r󰄋 use.

Battery Charger

Battery 36 V / 11,6 Ah *

Input: 100-240 V

Output: 29.4 V

* At the time of purchase, your 36 V battery is inactive. Plug in your charger to activate it.

Your battery is guaranteed for 2 years or 500 charging and discharging cycles (1 cycle = 1 charge from 0% to 100% +

1 discharge from 100% to 0%) subject to compliance with the proper conditions of use and 󰘵orage.

9Di󰄋ance indicator

10 Units:

kilometres or miles

11 Lighting indicator:

Appears on the screen when the lights are on

12 Five battery levels.

When the battery level is low, the indicator 󰘵arts to 󰘱ash.

Additional battery and sy󰄋em information:

Indicates the battery charge level as a percentage

www.supportdecathlon.com

Setting :

Hold the «Lighting» button down for a few seconds to enter or quit the settings

Short press on the «+» or «-» buttons to select the desired setting.

SET 1: Reset the TRIP partial di󰘵ance counter.

SET 2: Choice of units (km/h or mph)

*Check the battery charge indicator when 󰘵ationary. In the event that heavy assi󰘵ance is required, disparities may be

noticed.

** The speed display accuracy is +/-2%.

*** Under the conditions of te󰘵 protocols for a 75kg user, tyre pressures at 4 bar and respecting the 10 good habits

Precautions for use

+50°

Do not expose to temperatures exceeding 50°C.

< +10°C +10°C / +50°C > +50°C

+10°C

+25°C

Storage conditions:It is essential to 󰘵ore the battery charged and in a dry, cool

place (between +10°C and +25°C), out of sunlight.

< +10°C +10°C / +25°C +25°C

+10°C

+40°C

Charge your battery in a dry environment at a temperature of between +10°C and

40°C.

< +10°C +10°C / +40°C +40°C

Caution: Under certain conditions, the controller, charger and mechanical brake

disc can reach high temperatures.

Never dismantle it.

Do not dispose of the battery in non-suitable containers. Return the used battery to

your Decathlon 󰘵ore for recycling.

Risk of 󰘰re.

Risk of electrocution.

To be handled with care.

Product is sensitive to impacts.

Never short-circuit the battery by connecting the positive and negative terminals.

Never permit children to play with or handle the battery.

Do not immerse in water.

Do not clean using a high-pressure washer.

Rain resi󰘵ant.

x : 1..... 500

Your battery can be completely charged and drained 500 times.

Hereafter, the capacity and autonomy of the battery is reduced.

Always make sure that the battery and charger are compatible.

+100 V / +240 V Always ensure the charger is compatible with the local electrical grid:

Voltage: 100 V, 240 V maximum.

+50 Hz / +60 Hz

Frequency: 50 Hz minimum, 60 Hz maximum.

Only charge the battery indoors.

Transport by aeroplane is prohibited.

Any failure to comply with the precautions for use will void the manufacturer

warranty.

Tabla de contenidos

Otros manuales de Bicicleta de Btwin

Manuales populares de Bicicleta de otras marcas

RAMBO

RAMBO R1000X2M-FF-BFD Manual de usuario

Vermeiren

Vermeiren SAFARI Manual de usuario

Velec

Velec A2/36V Manual de usuario

Coswheel

Coswheel A-ONE Manual de usuario

Betzold

Betzold 97869 Manual de usuario

Cervélo

Cervélo S3 2019 Manual de usuario

Tenways

Tenways AGO X Manual de usuario

Festo

Festo EGSC-BS-KF Manual de lista de piezas

Gio Electric

Gio Electric H1 Volt Manual de usuario

GOGOBEST

GOGOBEST GM30 Manual de usuario

DAHON

DAHON CIAO - 2009 Manual de usuario

Aprimatic

Aprimatic ONDA 500 Guía de inicio rápido

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manual de instrucciones

Greyp

Greyp G6 Series Manual de usuario

Babboe

Babboe Carve-E Manual de usuario

Huka

Huka orthros Manual de usuario

Xtracycle

Xtracycle Stoker 2021 Manual de usuario

APRILIA

APRILIA DORSODURO 750 ABS 2015 Manual de usuario