BT Converse 325 Manual de usuario

Converse 325 ~ 3rd Edition ~ 17th January ~ 4116

This product is intended for connection to analogue pu lic switched telephone networks

and private switch oards in the United Kingdom.

User

Guide

Converse 325

Corded Telephone

Converse 325 ~ 3rd Edition ~ 17th January ~ 4116

Please open this page for an ‘At a glance’ guide

to your Converse 325.

Converse 325 ~ 3rd Edition ~ 17th January ’02 ~ 4116

At a glance

1 2

Converse 325 ~ 3rd Edition ~ 17th January ’02 ~ 4116

Converse 325

Reminder

Call Off

Reminder

Call On

1571

Call

Diversion

1471

Headset button (and light)

Used in conjunction with a

headset.

Volume

Adjusts the volume

of your caller’s voice.

Message Waiting indicator

(for compatible switchboard

users only) Flashes when

there is Voice Mail.

Call indicator light

Flashes to indicate you

have an incoming call.

Inserts a space in a number when storing

numbers in the memory.

Handset hook

Rotates to hold the handset in place

when wall-mounted.

Clear

Used to edit numbers when pre-dialling

or when storing numbers in the memory.

Display

Shows 24-hour clock, battery low

indicator, phone numbers, and ‘Error’

if you press a wrong button.

Handsfree button (and light)

Allows you to make and receive calls

without lifting the handset, leaving your

hands free.

Voice amplification

Amplifies your caller’s voice when

using the handset or headset.

Hearing aid compatible

Your Converse handset

is hearing aid

compatible.

Handset park

When the phone is wall-mounted you can

hang the handset here if you need to leave

the phone during a call.

tore

Lets you store numbers in the one-touch

and two-touch memories.

Dial

Dials the number shown on the display.

Redial

Redials the last number called. Repeat-dials

the redial number. Also lets you enter a

pause in a stored number.

Recall

For use with a switchboard/PBX, e.g. to

transfer calls and some BT Select Services.

Clock

Used to set the clock and time the duration

of a call.

Calculator button

Switches the display to the calculator

function.

Telephone number label

Lift the plastic cover to remove the label

and write your phone numbers.

Memory buttons

Press to dial a stored number. Some buttons

are pre-programmed with Select Service

codes.

hift

Used to store and dial two-touch memory

numbers.

ecrecy button (and light)

Allows you to talk to someone in the same

room without your caller being able to hear

the conversation.

Converse 325 ~ 3rd Edition ~ 17th January ~ 4116

In this guide

At a glance 1

Introduction 4

Unpacking 4

For your records 4

Safety information 4

Setting up 5

Using the telephone 7

Last number redial 8

Secrecy 9

Handsfree talking 9

One-Touc and Two-Touc

memories 10

Data port 13

Using BT Select Services 14

1471 – Call Return 14

Call Diversion 15

1571 – Call Minder/BT Answer 15

Reminder call 16

Ot er services 16

General in ormation 18

Guarantee 18

Tec nical information 19

Switc board compatibility 19

R&TTE Directive 19

Wall-mounting 20

Index 21

Hints and tips boxes

In this user guide, we’ve included

helpful tips and important notes.

They are shown in boxes like this.

Converse 325

Reminder

CallOff

Reminder

CallOn

1571

Call

Diversion

1471

Converse 325 ~ 3rd Edition ~ 17th January ~ 4116

Introduction

Your Converse 325 has been designed for ease of use and made

to the high standards set by BT.

Unpacking your

Converse 325

If anything is missing, please contact

your place of purchase immediately.

Converse 325 telephone

with telephone line

attached.

Screws, wall plugs and

plinth for wall-mounting.

3 x AAA batteries

For your records

For guarantee purposes, proof of

purchase is required, so please keep

your receipt.

Date of purchase:

Place of purchase:

Serial number

(on the underside of the base unit):

Purchase price:

Please read the instructions carefully

before use and keep this User Guide

for future reference.

Safety information

General

Simply clean your Converse 325 with a damp

(not wet) cloth, or an antistatic wipe.

Never use household polish as this may

damage the product.

Never use a dry cloth as this may cause

static shock.

Do not open the Converse 325. This could

expose you to high voltages or other risks.

Never dispose of batteries in a fire. There is

a serious risk of explosion and/or the release

of highly toxic chemicals.

Environmental

Do not expose to direct sunlight.

We recommend that you do not place the product

on antique/veneered wood to avoid damage.

Do not stand your product on carpets or other

surfaces which generate fibres, or place it in locations

preventing free flow of air over its surfaces.

Do not submerge any part of your product in water

and do not use it in damp or humid conditions,

such as in bathrooms.

Do not expose your product to fire, explosive or

other hazardous conditions.

I TRODUCTIO

Converse 325 ~ 3rd Edition ~ 17th January ~ 4116

1Insert t e batteries

The display on your Converse 325 is

Make sure the phone is not plugged

into the phone socket. Open the battery

compartment cover.

Insert batteries as shown.

Close the lid and replace the

compartment cover.

Plan t e location

Situate your Converse 325 close

enough to a phone socket so that the

line cord will reach.

Your Converse 325 can be wall-mounted.

See ‘Wall-mounting’,on page 20.

Setting up

2Plug your Converse 325

into t e p one socket

SETTI G UP

3C eck t e dialling mode

Your Converse 325 should be pre-set to

T-TB which gives you TO E dialling.

This ensures the phone will work with

all modern digital exchanges.

If your phone does not work when you

dial a number, try setting the dialling

mode to Tor P.

ote

When your batteries are within about

two weeks of total exhaustion,

BATT

LOW

will appear in the display. If you

do not replace the batteries and they

become totally discharged your

Converse 325 will not display anything

on the screen.

Converse 325 ~ 3rd Edition ~ 17th January ~ 4116

4Set t e time

Press the Store button.

Press the Clock button.

Enter the current time using

the 24-hour clock, eg. 0 9 3 0

= 9.30am, 1 5 3 0 = 3.30pm.

Press the Store button.

The time is set and displayed.

Your Converse 325 is now ready for use.

SETTI G UP

Converse 325 ~ 3rd Edition ~ 17th January ~ 4116

To make a call

Lift the handset off the base

and wait for the dial tone.

Dial the telephone number.

The display will show the

number dialled.

Preparatory dialling.

Without lifting the handset,

dial the telephone number you

want. The display shows the

number to be dialled.

Press the Dial button.

The number shown in the

display is dialled in ‘handsfree’

mode.

To end a call

Replace the handset.

To receive a call

When the telephone rings, the

Call indicator light will flash to

indicate that there is an

incoming call. Simply pick up

the handset.

To set t e call timer

You can time the duration of

each call.

During a call press the Clock

button. The time of the

previous call will be displayed.

Press the Clock button again

to start the timer. You can stop

the time by pressing the Clock

button once more.

Using the telephone

ote

There are 3 ways to make a call on

your Converse 325: by lifting the

handset, using the Handsfree button

or by using the Dial button.

ote

If you make a mistake, use

the Clear button to edit

the number you have entered.

USI G

Hearing Aid Compatibility

As this telephone is fitted with an

Inductive Coupler, Hearing Aid

wearers may benefit from switching

their hearing aid to the middle T

position and holding the earpiece up

to the aid, not their ear.

Converse 325 ~ 3rd Edition ~ 17th January ~ 4116

Using a eadset

Plug the headset into the

socket marked HEADSET on

the underside of the base.

To make a call, press the

Headset button.

Dial the phone number.

To end the call, press the

Headset button.

To redial t e last number called

Press the Handsfree button.

Press the Redial button.

The last number you called is

redialled.

ote

Converse headsets (RJ11

jack) are available separately

from BT shops or by calling

0870 240 5522.

To repeat-dial a number

If the number you call is

engaged, you can set your

Converse 325 to dial a number

repeatedly, saving you from

having to continually press the

Redial button.

When you hear the engaged

tone, press the Redial button.

Replace the handset (or press

the Handsfree or the Headset

button –depending which

mode you are in). The display

will show

BUSY

Ten seconds after the handset

is replaced, your Converse 325

will switch to ‘handsfree’mode

and the number is redialled.

ote

This feature works in handset,

handsfree and headset modes.

Last number redial

Your Converse 325 stores the last

number called which enables quick and

easy redialling. A redial number can be

no longer than 32 digits.

USI G

When you replace the handset

or press the Handsfree button

to end the call, the display

shows the final duration of the

call for a few seconds before

returning to the normal clock

setting.

Converse 325 ~ 3rd Edition ~ 17th January ~ 4116

Secrecy

When on a call you can talk to someone

in the same room, without your caller

hearing.

To switc Secrecy on and off

During a call, press and release

the Secrecy button.

The red Secrecy light will come

on. Your caller cannot hear you.

To resume your conversation,

press and release the Secrecy

button again. The Secrecy

light will go off.

Message Waiting indicator

When you have Voice Mail

messages waiting, the Message

Waiting indicator will flash at

regular constant intervals.

Handsfree talking

The handsfree feature allows you to

make and receive calls without lifting

the handset.

To make a andsfree call

Press the Handsfree button.

You will hear the dial tone.

Dial the telephone number.

The number will be shown on

the display.

When your call is answered

you can either speak in

handsfree mode or pick up the

handset if you wish to speak to

your caller privately.

To receive a call in

andsfree mode

When the phone rings, press

the Handsfree button.

ote

This feature is for compatible

switchboard users only.

USI G

ote

Lifting the handset, pressing the

Handsfree button or the Headset button

again will cancel the procedure.

If the number is still engaged,

your Converse 325 will wait for

45 seconds before repeating

the procedure. This will be

repeated every 45 seconds up

to a maximum of 15 times or

until the call is answered.

Otros manuales para Converse 325

Tabla de contenidos

Otros manuales de Teléfono de BT

Manuales populares de Teléfono de otras marcas

GE 2-9480 Manual de usuario

Geemarc

Geemarc PHOTOPHONE 155 Manual de usuario

D-Link

D-Link DWR-720/PW Manual de usuario

Interquartz

Interquartz Gemini IQ333 Manual de usuario

SSS Siedle

SSS Siedle HT 840-0 Manual de usuario

Motorola

Motorola TITANIUM Manual de usuario

Panasonic

Panasonic ICX Manual de usuario

LG H870DS Manual de usuario

Samsung

Samsung GT-I9500 Manual de usuario

AT&T

AT&T Trimline 205 Manual de usuario

Selta

Selta zenyth 600 Manual de usuario

Doro

Doro AFTI 20 Manual de usuario

UNIQCELL

UNIQCELL A1 Manual de usuario

Panasonic

Panasonic KX Series Manual de usuario

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manual de usuario

NEC

NEC SV8500 Manual de usuario

Teledex

Teledex PEARL Manual de usuario

Ericsson

Ericsson Dialog 3213 Manual de usuario