BT QUARTET 2000 Manual de usuario
User Guide
Quartet 2000
Cordless Additional Handset & Charger
This equipment is not designed for making emergency telephone calls
when the power fails. Alternative arrangements should be made for
access to emergency services.
Please open this page for an ‘at a glance’
guide to your Quartet 2000 Additional
Handset and Charger.
At a glance
Charger
Redial
Stores last 3 numbers
dialled.
Charging light
Illuminates when a handset
is charging.
Directory
To call and store up to 20
names and numbers.
Command buttons
Used in conjunction with
Display screen options.
Earpiece volume control
Increase or decrease
volume during a call.
In use light
Lights up when ringing or
a new message is waiting.
Recall
For use with switchboards.
Aerial
Extendable.
Talk
For making and ending calls.
Options
For navigating through the menu.
Display screen/Message Centre
Shows number of stored messages
and all status displays.
Keypad
Keys 0 - 9 plus ✱and
#
.
Registration button
For registering new handsets
to the Quartet 2015 base unit.
Power light
Illuminates when
power is switched on.
Aerial
Extend for use.
Base unit
1
3
In this guide
At a glance 1
Introduction 4
Setting up 5
Registering your handset 7
Using Additional Handsets 9
Wall mounting 11
Help 12
Technical advice 14
This guide shows you how to register your
Additional Handset and use the basic functions
of your Quartet system. To use the full range of
features, see your original Quartet User Guide.
Unpacking your Quartet 2000
Additional Handset and Charger
Check that your Quartet Additional Handset
is complete. When you unpack you should
have:
Cordless handset
Charger
Wall plugs and screws
13 amp mains power
adaptor plug
4
Introduction
Your BT Quartet 2000 Additional Handset and Charger is for use with the
Quartet range of cordless products and is made to BT’s high standards.
For your records
For warranty purposes, proof of purchase is
required, so please keep your receipt.
Date of purchase:
Place of purchase:
Serial number (on the underside of the charger):
Purchase price:
Plug one end of the mains power lead into the
charger and the other into a mains power
socket and switch on.
Place the handset in the charger.
Before you use your Quartet Additional
Handset for the first time it is important to
have the handset batteries fully charged. We
recommend that you leave the handset on the
charger for at least 24 hours.
5
Setting up
Follow these steps to get your Quartet Handset and Charger ready for use.
Situating your Additional
Handset and Charger
You can stand your Additional Handset and
Charger on a desk or any flat surface.
Make sure your Quartet Additional Handset
and Charger can be wall mounted (see page 11
for instructions).
Before wall mounting make sure it is:
•within range of the Quartet base unit.
•within 2 metres of a mains power socket.
Do not stand it on carpets or other similar
surfaces which might generate fibres.
PLEASE NOTE
If you have any problems setting up or using your
Quartet Additional Handset and Charger, call the
BT Quartet Helpline on 08457 697330.
1Plug your Quartet charger into
the mains power socket
2Charge the handset batteries for
at least 24 hours
Extend the aerial on the handset for optimum
performance.
You are now ready to register your Additional
Handset with your Quartet base unit.
6
3Aerial
Extendible
handset
aerial
Battery Low Indication
When the batteries need re-charging, the display
will show a ‘battery low’ symbol. Replace the
handset on the charger to re-charge.
Press the BLACK button on the base
unit.
BLACK
BUTTON
A double beep sounds and the display
returns to standby. Your handset is
now registered to the Quartet base unit.
7
Registering your handset
All Additional Handsets must be registered
with the Quartet base unit before you can use
it. You can have up to 3 Additional Handsets
registered to your Quartet base unit, plus the
original handset purchased with the base unit.
Press buttons in order shown
Charge the handset for 24 hours.
The handset display will show
YES
Press YES. The display shows
HANDSET 2
, with
2
flashing.
KEYPAD
Enter the number of the handset to be
registered. If yours is the second of
two, enter 2, if the first, enter 1etc.
OK
Press OK. This display shows
PRESS
BASE BUTTON.
To register an Additional Handset
Options
REGISTER
YES
8
Press buttons in order shown
If you want to re-register your
Additional Handset with a different
Quartet unit, the handset needs to
be reset.
Press the VOLUME button and the
REDIAL button together until the
display shows
RESET
.
OK
Press OK to confirm.
The handset shows REGISTER.
OK
Press OK. This display shows
PRESS
BASE BUTTON.
Press the BLACK button on the base
unit.
BLACK
BUTTON
A double beep sounds and the display
returns to standby. Your handset is
now registered to the Quartet base unit.
Redial
VOL
To register your handset to
another Quartet unit NOTE
If the handset is reset, the Directory memories
will be erased and the handset options will return
to their original settings.
9
Using Additional Handsets
Your Quartet 2000 Additional Handset, once
registered to your Quartet base unit, will
operate in exactly the same way as your
existing Handset(s). For instance, if you have
a Quartet 2015, you can use your Handset
to operate the in-built answering machine as
well as the telephone features.
Any registered Handset is capable of
accessing/operating the settings of the base
unit, such as base ringer tones etc. However,
the settings of the individual handsets, such
as the handset ringer volume, can only be
changed from that particular handset and not
from any other.
Follow the steps shown in the main Quartet
User Guide to make and receive calls, store
numbers in the directory, operate the
answering machine*, use BT Select Services
and change the original settings on your phone.
Directory
Each Handset has an individual name and
number Directory, which is unique to that
handset and not accessible from any other.
Therefore, if you have 4 Handsets registered
to your base unit, your system will have the
total capacity to record 80 names and numbers!
Display symbols
The following symbols may appear on your
handset display.
*Only if your handset is registered to a Quartet 2015.
Symbol Meaning
Battery Low
Call Transfer
In Use
Answering
machine ON
You have messages
stored on your
answering machine
Flashing indicates
you have new
messages stored
*
*
*
Tabla de contenidos
Otros manuales de Auricular de BT
BT
BT Diverse 5200 Manual de usuario
BT
BT CALLER DISPLAY 1000 Manual de usuario
BT
BT QUARTET 3000 Manual de usuario
BT
BT DIVERSE 2000 EXECUTIVE Manual de usuario
BT
BT 2000 Executive Manual de usuario
BT
BT agile Manual de usuario
BT
BT FREESTYLE 2000 Manual de usuario
BT
BT Diverse 2000 Manual de usuario
BT
BT SYNERGY 3000 Manual de usuario
BT
BT DECTfax Manual de usuario
BT
BT SYNERGY 2100 Manual de usuario
BT
BT DIVERSE 5200 ADDITIONAL Manual de usuario
BT
BT DIVERSE 5300 Manual de usuario
BT
BT DIVERSE 5100 ADDITIONAL Manual de usuario
BT
BT Diverse 2000 Manual de usuario
BT
BT DIVERSE 5400 Manual de usuario
BT
BT Diverse 7460 Manual de usuario
BT
BT SYNERGY 3005 Manual de usuario
BT
BT FREESTYLE 6 ADDITIONAL Manual de usuario
BT
BT DIVERSE 6100 Manual de usuario
