BT BT1600 Hoja de especificaciones

UK’s best selling phone brand†

Quick Set-up and User Guide

BT1600

Digital Cordless Phone with Answering Machine

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Important – please read ﬁrst2

• Only use the line cord, power supply (item code: 066773) and rechargeable

batteries supplied with your phone.

• Make sure that the power supply is connected to a known working socket.

• Connect your phone to the power supply and allow the batteries to charge for

24 hours before connecting the line cord to your telephone socket.

• To make sure you get the best range and reception from your handset, avoid

interference by placing the base unit away from large metal objects such as

fridge freezers and microwave ovens or electronic products such as computers

and TVs.

Answer machine – handy hint

Make sure the telephone is set to Answer and record and that the Ring delay

is set to answer before any voicemail service i.e. BT Answer 1571, or similar.

The default setting is ﬁve rings. If you want to change this, please see page 39.

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Check box contents

IMPORTANT

Only use the mains power adaptors, cables and rechargeable batteries supplied in this box, or this

product may not work. Any replacement rechargeable batteries must be of the same type. BT accepts

no responsibility for damage caused to your BT1600 by using any other type of batteries.

Contents for each additional handset (multipacks only)

Handset

Mains power adaptor

(item code 066773)

Mains power adaptor

(item code 066773)

Telephone line cord

(pre-installed)

2x AAA NiMH 500mAh

rechargeable batteries

(already in handset)

2x AAA NiMH 500mAh

rechargeable batteries

(already in handset)

Base

Charger

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Where to put your phone

• Place the base within

3 metres of a mains power

socket and 1.8 metres of a

phone socket so the cables

will reach.

• Don’t place the phone or

base in a bathroom or

other humid area.

• The product works by

sending radio signals

between the handset and

base. The strength of the

signal depends on where you

position the base. Putting it

as high as possible can help

give you the best signal.

IMPORTANT

• Don’t connect the phone line

to a phone socket until the

handset is fully charged.

• The base station should

be plugged into the mains

power socket all the time.

Quick set-up guide4

1Plug in

1. Plug the mains power

adaptor into the base,

with the cable clipped

in the groove provided.

2. Plug the other end

of the power adaptor

into the wall power

socket and switch on.

The phone line cord is pre-installed but don’t

plug the other end into the wall socket yet.

066773

Quick set-up guide 5

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Talk/Standby time

Under ideal conditions, the

handset batteries should give

up to 12 hours talk time or

120 hours standby on a

single charge.

Please note that new Ni-MH

rechargeable batteries don’t

reach full capacity until

they’ve been in normal use

for several days.

Battery low warning

The icon will ﬂash, you’ll

see the message

Battery

Low

the display and hear a warning

beep every minute, to indicate

that you need to recharge your

handset before you can use it.

You can remove the display

message by selecting

Hide

. If

the battery charge completely

runs out, the display will show

Batteries

flat.

Please

charge

You must recharge the handset

batteries before you can use

the handset. If the charge

completely runs out the

handset will switch off. Place

the handset on the base or

charger to charge.

Quick set-up guide 5

2Activate the batteries and

follow the Set-up wizard

1. Activate the batteries by pulling

the plastic tab away from the

back of the handset.

2. The handset will check for a

link with the base station.

Once found, the screen will

show,

Please

set

the

time

and

date

. Press the Left option

button on the handset to

follow the setup wizard. You’ll

need to set the time and date, but you can then

press the Right option button to skip any

further options until setup is complete (you can

always set these up later).

Remove this tab

and charge batteries

for 24 hours before use.

Rechargeable batteries

already fitted

Please set the

time and date

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Quick set-up guide6

Battery performance

• To keep the batteries in the

best condition, leave the

handset off the base for a

few hours at a time.

• Running the batteries right

down at least once a week

will help them last as long

as possible.

• After charging your handset

for the ﬁrst time, subsequent

charging time for the

batteries is approximately

8 hours.

• The charge capacity of

rechargeable batteries will

go down over time, which

will reduce the talk and

standby time. Eventually

they’ll need replacing.

For details on how to get

replacement batteries,

call the helpline on

0800 218 2182*.

3. Once set-up is complete your handset will display

Please

check

line

cord

,placethehandsetonthebase

to charge.

4. After 24 hours, plug the phone line cord into the

phone wall socket.

IMPORTANT

Charge the handset batteries for 24 hours or your

phone might not work.

Set up your additional handsets (multipacks only)

1. For additional handsets and chargers: plug the

mains power adaptor into the underside of the

charger and plug the other end into the mains wall

socket and switch on the power.

2. Activate the batteries as explained on page 5.

3. Place the handset on the charger to charge for

24 hours.

Quick set-up guide 7

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

If you ever need to remove the batteries, slide

open the battery compartment cover then gently

ease the batteries out.

3Go!

Your BT1600 is now ready for you to use

• For help setting the date and time, go to page 56.

• For instructions on making a call, go to page 19.

• For help personalising your phone’s settings, go to

page 48.

• For instructions on using the answer machine,

go to page 35.

Or, you may ﬁnd the answer in the Help section

on page 66 or see our online frequently asked

questions at bt.com/producthelp

Alternatively, call the Helpline on 0800 218 2182*.

Quick set-up guide 7

Using your BT1600 on a line

with broadband?

To avoid problems with your

broadband or noise on your

phone line, you might need to

plug your telephone line cord

into the wall socket via a

microﬁlter (not supplied).

If your main phone

socket has a single

socket, you do need

to use microﬁlters,

like this:

You’ll need a microﬁlter for every

phone socket where you’ve

got equipment plugged in – up

to a maximum of four per line

– including alarm sytems and

digital TV boxes.

You can get BT ADSL micro ﬁlters

from bt.com/shop

You don’t need to use microﬁlters

if your main phone socket has

two separate sockets, like these:

* Calls made from within the UK mainland network are free.

Mobile and international call costs may vary.

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

8In this guide

Getting to know your phone

Handset buttons..............................12

Handset display/display icons...........14

Finding your way around your phone15

Menu map.......................................16

Base................................................18

Using the phone

Make an external call .......................19

Preparatory dialling .........................19

End a call.........................................19

Switch the handset on or off.............19

Receive a call...................................20

Call Waiting .....................................20

Mute...............................................21

Incoming speech volume..................21

Redial .............................................21

Voicemail (1571) .............................22

Keypad lock.....................................22

Turn the handset ringer on or off.......23

Finding handset (paging) .................23

Contacts

Store a contact name and number ....24

Character map .................................25

View/dial a contact ..........................25

Edit a contact ..................................26

Delete a contact ..............................26

Delete all contacts ...........................27

View the contact memory status.......27

Copy a contact (only available if you

have more than one handset) ...........28

Copy all contacts (only available if you

have more than one handset) ...........29

Speed dial

Save a speed dial entry.....................30

Dial a speed dial entry......................31

Edit a speed dial entry......................31

Delete a speed dial entry ..................31

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

In this guide 9

Caller Display and the Calls list

Caller Display...................................32

Calls list...........................................32

Missed call notiﬁcation.....................33

View/dial an entry in the Calls list......33

Save a Calls list entry to your contacts..33

Delete an entry in the Calls list..........34

Delete the entire Calls list .................34

Answer machine

Using the answer machine from

the handset.....................................35

Switch the answer machine on or off..35

Outgoing messages..........................35

Record your own outgoing message..36

Play the current outgoing message...36

Reinstate the pre-recorded

outgoing message ...........................37

Record a memo ...............................38

Set the answer mode

(Answer & Record or Answer Only)....38

Set the answer delay........................39

Set the maximum message length.....39

Set the message alert on or off .........40

Call screening ..................................40

Message playback using the handset 41

Delete all old (played) messages .......42

Using the answer machine from

the base ..........................................43

Switch the answer machine on or off..43

Message playback using the base......43

Delete all old (played) messages .......44

Remote access.................................44

Set the remote access PIN for the

ﬁrst time .........................................45

Change the remote access PIN..........45

Turn remote access on/off ................46

If you forget to switch on your

answer machine...............................46

Operating your answer

machine remotely............................47

In this guide

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Settings

Set the handset ringtone for external

or internal calls ................................48

Set the handset ringer volume..........48

Turn the handset tones on or off .......49

Change the handset name................50

Change the handset display contrast.50

Change the call settings ...................51

Set the base ringtone.......................51

Set the base ringer volume ...............52

Set a PBX access code ......................52

Change the system PIN.....................53

Reset the handset or base settings....54

Reset the handset or base user data..54

Clock/Alarm

Set the time format (12 or 24 hour) ..56

Set the time and date.......................56

Set an alarm ...................................57

Stopping the alarm when it goes off..57

BT Calling Features

Pre-stored numbers in the Calling

Features menu.................................58

Using Call Diversion..........................59

Using Ringback................................59

Using Call Waiting ...........................60

Using Reminder call .........................60

Using Call Barring ............................61

Using Anonymous call reject.............61

Using additional handsets

De-register a handset ......................63

Make an internal call

between handsets............................64

Transfer a call...................................64

Hold a 3-way call.............................65

Help ...............................................66

Tabla de contenidos

Otros manuales de Teléfono inalámbrico digital de BT

BT Diverse 7450 Plus Manual de usuario

Manuales populares de Teléfono inalámbrico digital de otras marcas

Panasonic

Panasonic KX-TG4011LAT Manual de usuario

Panasonic

Panasonic KX-TG1311SA Manual de usuario

Panasonic

Panasonic KX-TCD300E Manual de usuario

Panasonic

Panasonic KX-TCD210G Manual de usuario

Panasonic

Panasonic KX-TG8011E Manual de usuario

Gigaset

Gigaset r630h pro Manual de usuario