Brunner BKH 5.0 flat 42-50 green Manual de usuario

Installation Manual

BKH 5.0 flat

42-50

CONTENTS

1 Basic informations..................................................................................................... 3

2 Safety precautions..................................................................................................... 3

3 Specified symbols......................................................................................................4

4 Delivery contents BKH 42-50 flat............................................................................. 6

4.1 Catalytic converter (optional)........................................................................................................ 9

4.2 Heat protection panel (optional)..................................................................................................10

4.3 Heat exchanger rings (optional)..................................................................................................11

4.4 Air connection box (optional)...................................................................................................... 11

5 Safety distances BKH flat....................................................................................... 12

6 Setting up.................................................................................................................. 14

6.1 Remove the transport locks........................................................................................................ 14

6.2 Heat protection panel (optional)..................................................................................................15

6.3 Set up the fireplace.....................................................................................................................26

6.4 Variant with external combustion air connection........................................................................ 28

6.4.1 Bottom connection (B).................................................................................................. 30

6.4.2 Side connection (S)...................................................................................................... 36

6.5 Variant with EAS or EOS............................................................................................................42

7 Fitting: catalytic converter...................................................................................... 53

8 Fitting: deflection - combustion chamber............................................................. 57

9 Variants heat exchanger..........................................................................................66

9.1 Connection with catalytic converter............................................................................................ 66

9.2 Connection without catalytic converter....................................................................................... 67

9.3 Cast iron dome............................................................................................................................73

9.4 Heat exchanger rings.................................................................................................................. 75

9.5 Heat exchanger MAS.................................................................................................................. 81

10 Frame variants..........................................................................................................87

10.1 Door frame (BKH with side-opening door)..................................................................................87

10.2 Mounting frame or door frame (BKH with lifting door)................................................................88

11 Conversions, settings.............................................................................................. 93

11.1 Change of the door stop............................................................................................................. 93

11.2 Adjusting of self-closing door.................................................................................................... 109

11.3 Modification - lifting door: “non self closing”............................................................................. 117

12 Disposal...................................................................................................................120

13 Technical data........................................................................................................ 122

1 BASIC INFORMATIONS

All instructions delivered with products must be observed. We do not accept any warranty claim or

liability for damage resulting from failure to observe these installation instructions!

Improper installation can cause injury and material damage!

The floor space of the room must have a suitable structure and sufficient dimensions to ensure proper func-

tioning of the fireplace.

Please note that other installation and assembly instructions are included in other packaging units!

Dimensioning of downstream heat accumulator must be according to valid stove-setting rules.

During installation of the fireplace, all dimensions and minimal clearances of the fireplace casing must be

held as specified by the manufacturer.

All binding national or EU standards and local regulations for the installation of fireplaces must be observed.

All valid stove fitting rules and regulations of local construction law must be observed and followed.

Please follow the relevant regulations of your country.

When these instructions are followed and all works are done properly, this will ensure a safe, energy-sav-

ing and environmentally friendly operation of the stove. Pictures shown are not to be considered as complete

representations of any kind.

Subject to technical and assortment changes.

Please notify your supplier of any damage which might have occurred during transport.

Please keep these instructions.

Please also take note of the online product documentation provided

by:

General instructions of the Brunner products installation for the

stove construction.

(https://www.brunner.de/produktdownloads/kacheloefen-kamine/allge-

meine-hinweise-fuer-den-aufbau_de.pdf) laden können.

2 SAFETY PRECAUTIONS

Fireplaces may be set up only in rooms or areas with no risk of danger due to their location, structure or in-

tended use.

Working on the stove Installation, commissioning, servicing and maintenance works on the

product may be carried out only by an authorized stove-fitter. Safety

and efficiency of the system depend on this!

Working with electronics Switch off the emergency switch or circuit breaker, and secure them

against switching on again.

Fireplaces with external air supply are not independent from room air supply and must be consid-

ered and designed as roomsealed fireplaces. In connection with a ventilation or extraction system,

we recommend the use of a negative pressure safety device (Art.No.: 11600.1).

Installation must be carried out by an authorized stove-fitter, because safety and efficiency of the system de-

pend mostly on proper installation of the product. All valid stove fitting rules and regulations of building law

must be observed and followed. Make sure to instruct the owner or user about the functions and controls of

the system and possibly installed safety devices.

Fireplaces must be built to ensure safe operation and fire safety in order to eliminate possible risks and un-

acceptable loads. They have to be ready for use over an adequate period of time.

Make sure to instruct the owner or user about the functions and controls of the system and possibly installed

safety devices.

Remember to use only genuine replacement parts.

3 SPECIFIED SYMBOLS

In this documentation, a distinction is made between:

Operating personnel as the User of the system, i.e. the end user, which has received instructions from the Contractor

and does not necessarily have additional qualifications.

Operating personnel as the Contractor, i.e. the qualified professionals, which are entitled to perform the indicated spe-

cialist works.

In this document, the following symbols are used:

DANGER

A danger of high risk persists, which leads to severe injury or death, if this endangering situa-

tion is not avoided.

WARNING

A danger of medium risk persists, which can lead to severe injury or death, if this endangering

situation is not avoided.

CAUTION

A danger of low risk persists, which can lead to minor or moderate injury, if this endangering

situation is not avoided.

ATTENTION

There is a certain risk, which can lead to a malfunction or damage of the related system and all

devices connected with it, if the indicated notifications are not followed.

NOTE

Additional helpful information

4 DELIVERY CONTENTS BKH 42-50 FLAT

Available variants with lifting door (ST):

BKH 42-50 flat with lifting door

9.2 9.1 8.2

6.4

8.1

6.1

6.2

6.1 6.3

Available variants with side-opening door (DT)

BKH 42-50 flat with side-opening door (DT)

8.1

8.2

6.2

6.1 6.4

6.2

6.1

9.1

Art.-Nr.

Pos. Designation

for ST for DT

BKH - variants:

BKH 5.0 Flach 42-50 ST with manual operation, with Ceram-

ic glass (GK) chamotte inner linging (FR) HK003002-01 -

BKH 5.0 Flach 42-50 ST with manual operation, with Glass

ceramic coated (GKB) chamotte inner linging (FR) HK003002-05 -

BKH 5.0 Flach 42-50 ST for EAS/EOS with Ceramic glass

(GK) chamotte inner linging (FR) HK003002-02 -

BKH 5.0 Flach 42-50 ST for EAS/EOS with Glass ceramic

coated (GKB) chamotte inner linging (FR) HK003002-06 -

BKH 5.0 Flach 42-50 ST with manual operation, with Ceram-

ic glass (GK) Cast iron inner lining (FR/Guss) HK003002-03 -

BKH 5.0 Flach 42-50 ST with manual operation, with Glass

ceramic coated (GKB) Cast iron inner lining (FR/Guss) HK003002-07 -

BKH 5.0 Flach 42-50 ST for EAS/EOS with Ceramic glass

(GK) Cast iron inner lining (FR/Guss) HK003002-04 -

BKH 5.0 Flach 42-50 ST for EAS/EOS with Glass ceramic

coated (GKB) Cast iron inner lining (FR/Guss) HK003002-08 -

BKH 5.0 Flach 42-50 DT with manual operation, with Ceram-

ic glass (GK) chamotte inner linging (FR) - HK002002-01

BKH 5.0 Flach 42-50 DT with manual operation, with Glass

ceramic coated (GKB) chamotte inner linging (FR) - HK002002-05

BKH 5.0 Flach 42-50 DT for EAS/EOS with Ceramic glass

(GK) chamotte inner linging (FR) - HK002002-02

BKH 5.0 Flach 42-50 DT for EAS/EOS with Glass ceramic

coated (GKB) chamotte inner linging (FR) - HK002002-06

BKH 5.0 Flach 42-50 DT with manual operation, with Ceram-

ic glass (GK) Cast iron inner lining (FR/Guss) - HK002002-03

BKH 5.0 Flach 42-50 DT with manual operation, with Glass

ceramic coated (GKB) Cast iron inner lining (FR/Guss) - HK002002-07

BKH 5.0 Flach 42-50 DT for EAS/EOS with Ceramic glass

(GK) Cast iron inner lining (FR/Guss) - HK002002-04

BKH 5.0 Flach 42-50 DT for EAS/EOS with Glass ceramic

coated (GKB) Cast iron inner lining (FR/Guss) - HK002002-08

2The non-installed parts (e.g. deflection plates, control levers, etc.) and any accessories ordered (e.g. catalytic

converter, packaging with EOS, etc.), including the instructions box, are packed in the combustion chamber

verbaute Combustion chamber lining:

- aus Chamotte

- aus Cast iron

4 Ceramic glass (GK)

5 Catalyst module BKH 5.0 HK000210

Smoke hood variants

Art.-Nr.

Pos. Designation

for ST for DT

Rotating cast iron dome with adjustable connecting piece ⌀

180 mm D004186

6.1

Rotating cast iron dome with connecting piece d=200 mm 10087

6.2 with heat exchanger rings R015006-02

6.3 Connection variant MAS SET440 SET211444

6.4 Cast iron dome low D016042

Additional options

7 Heat protection panel see Variants “Heat protection panel”

Supply air connection box ⌀ 125 mm HK000135

8.1

Supply air connection box ⌀ 150 mm HK000136

8.2 Supply air connection box ⌀ 125 mm with EOS / EAS HK000080

9.1 Door frame, black HK003152-01 HK002150-01

9.2 Mounting frame, black HK003150-01 -

4.1 CATALYTIC CONVERTER (OPTIONAL)

The catalytic converters are coated with a catalytically ac-

tive layer. This coating can consist of mixed metal oxides

or also of precious metals. In order not to limit the effect

of this catalytically active layer, the catalysts may only be

handled with gloves, preferably with disposable gloves.

In order not to limit the effect of this catalytically active lay-

er, the catalysts may only be handled with gloves, prefer-

ably with disposable gloves.

ATTENTION

The catalysts are fragile and must only be handled with care. Avoid bumping and

do not drop the catalytic converter. This could destroy the catalytic converter!

1 catalytic converter

2 assembly tool

Note

This catalytic converter is suitable for all BKH units (with lifting door, with side opening

door, tunnel, with cast dome, with heat exchanger cast rings and MAS).

This catalytic converter can also be retrofitted.

4.2 HEAT PROTECTION PANEL (OPTIONAL)

1 HK004450 Heat protection panel backwall,

incl. screws

2 HK00251 Heat protection panel, side,

incl. mounting frame, screws

HK004450-01 = HK004450(1) + 1x HK00251 (2)

HK004450-02 = HK004450(1) + 2x HK00251 (2)

Tabla de contenidos

Otros manuales de Chimenea de interior de Brunner

Brunner

Brunner KSO Manual de usuario

Brunner

Brunner BKH Manual de usuario

Brunner

Brunner BKH 5.0 flat 50-98 green Manual de usuario

Brunner

Brunner Iron dog 06 Manual de usuario

Brunner

Brunner green BKH 5.0 50-82 Manual de usuario

Brunner

Brunner Panorama Manual de usuario

Brunner

Brunner I048145 Manual de usuario

Brunner

Brunner green BKH 5.0 50-98 Manual de usuario

Brunner

Brunner BKH 5.0 flat 42-98 green Manual de usuario

Brunner

Brunner BKH 5.0 flat 42-66 green Manual de usuario

Brunner

Brunner green BKH 5.0 42-98 Manual de usuario

Brunner

Brunner BKH 5.0 flat 50-82 green Manual de usuario

Manuales populares de Chimenea de interior de otras marcas

Brigantia

Brigantia 35-DVRS31N-2 Manual del propietario

Nordpeis

Nordpeis Bergen Manual de usuario

Superior

Superior BCT2536TMN Manual de usuario

Quadra-Fire

Quadra-Fire 5100I-GD-B Manual de usuario

Renaissance

Renaissance RUMFORD 1000 Manual de usuario

Lacunza

Lacunza IV-800 Manual de usuario

Baxi

Baxi 940 Instrucciones de uso

Dru

Dru Maestro 60/2 Tall RCH Manual de usuario

Diamond Fireglass

Diamond Fireglass SS-O22 Manual de usuario

HearthStone

HearthStone Windsor Bay 8830 Manual de programación

Napoleon

Napoleon ASCENT B42 Manual de usuario

Enviro

Enviro E33GI Manual de usuario

Smeg

Smeg L30 FABE Instrucciones de montaje

KEDDY

KEDDY K700 Manual de usuario

Godin

Godin 3451 Manual de usuario

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manual de usuario

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manual de usuario

Desa

Desa CCFPDFT Manual de operación