Brother GTX600 Manual de usuario

GTX600 Pre-Site

Survey/Installation

Agreement

GTX600

In this document there are links to 3rd party products that Brother recommends as examples. Brother does not hold

affiliation with or warranty any of the products or manufacturers that are recommended through these links. If a

warranty matter comes up after purchasingan item from a 3rd party source please contact that vendor for support.

Site Information

BusinessType

First Name

Last Name

Phone Number

Address Line 1

Address Line 2

City

State

Zip Code

Customer Company Name

Brother Academy Registration

First Name

Last Name

Phone Number

•Brother utilizes a Learning Management Software during the onsite training and installation of the garment printing equipment. The

initial installation and use of this software is a mandatory process. Please ensure that you list the main person that will operate or

need to be trained on the equipment from your staff below. This person will be registered and sent material to prep them for the

installation process. Additionally this person will receive new classes and updates as they become available for the equipment.

•If you need to register additional staff please email the full list to BrotherAcademy@brother.com

HOW DOES THE ACADEMY WORK?

WHAT IS BROTHER ACADEMY?

Environmental Condition Requirements

Environment for: RequiredTemperature RequiredHumidity

Keeping yourprinter 0°C (32°F) to 40°C(104°F) 20% to85%

(nocondensation)

Operating yourprinter 10°C (50°F) to 35°C(95°F)

Achieving

optimal printing

conditions

18°C (64.4°F) to 30°C(86°F) 35% to85%

(nocondensation)

•The following environmental requirements should bemet:

•If these temperature conditions can not be met, air conditioning or heating will be needed.

•GTX600 has a built-in humidifier to help control ambient environment. If a water source can not be provided you may need an evaporative

humidifier for the room size.Do not use a humidifierthat createsmist as it can damage the electrical componentsof the printer.

•If conditions onsite are to ever exceed or drop below “optimal printingconditions” then it must be understoodthat the printermay have

issues with operation.

•When the temperatureis below the “optimal” range, the printerwill take longer toprint.

•When above the “optimal” range it can startto causeissueswith printqualityin the form of banding,or missingnozzleswhen printing.

•If excessively high, it may causethe ink supply partsto becomedamagedas a resultof ink drying inside ofthem.

•Even if the printeris to be stored,the conditions for“Keeping your printer” must still bemet. Contact Brother support prior storing machine by

creating a ticket at https://productiondtg.com/support.

I understand that the printer will need to be placed in an area that can meet the environmental

conditions mentioned above and that if not operated inside of the specified conditions this may cause

issues with printing, or the printer.

Electrical Requirements

•Ensurethat the properelectricalcapacityis present and available for use.

•Ensure that the heat press is going to be put on its own dedicated circuits

that meet the power requirements as listed by the OEM. For example, there

are a few commonitems listedto the right.

•The heat press needs to be kept on its own dedicated breaker/circuit. If an

Air Fusion is purchased a compressor will also be needed and on dedicated

line.

•APretreatment machine can share an outlet as long as it has a low amperage

consumptionsuchas a Schulze product.

•The GTX600 can not be hardwired and must require a plug. Plug is not

provided and must be available for installation tech.

• Brother provides a 6’ cord in the Starter Kit

•24/7 power supply will be required

Electrical

Requirements Power Power

Consumptions

GTX600 Single-ph

ase

200 V; 240

50/60 Hz 5 Amp max

Schulze IV Single-phas

120-240V,

50/60Hz 2Amp

MAXX2G120

Single

-phase

120V,

50/60Hz 15Amp

MAXX2G220 Three-pha

240V,

50/60Hz 15Amp

I understand that proper electrical will need to be provided and available for the equipment being purchased.The equipmentwill need

to be wired and ready for use before the time ofinstallation.

Equipment for Uncrating GTX600

Forklift is required.

Maneuvering the crate to the final destination site will require a clear path to use a forklift. Make sure that the forklift being used can handle

the size and weight of the package.

Crate Packing Size:

•76.75” (D)

•73.25” (W)

•65” (H)

Forklift Requirements for GTX600

Min. clearance between forks:

30 7/8” (78.5 cm)

Weight of the Machine itself:

38 6/8” (98.5 cm)

Length of Forks:

At least 76 3/4” (195 cm)

Weights

Weight of Shipment:

1785.74 lbs. (810 kg)

Weight of the Machine itself:

1609.37 lbs. (730 kg)

Equipment for Moving the GTX600

Forklift is required.

See below where the forks will insert to separate the machine from the packaging.

Forklift Requirements for GTX600

Min. clearance between forks:

30 7/8” (78.5 cm)

Weight of the Machine itself:

38 6/8” (98.5 cm)

Length of Forks:

At least 76 3/4” (195 cm)

Weights

Weight of Shipment:

1785.74

lbs.

(810 kg)

Weight of the Machine itself:

1609.37 lbs. (730 kg)

Equipment Placement

I understandthat the equipmentwill needto be arrangedin the designatedwork area and everything will

needto be intactand placedon the stand that came with theproduct.

Workspace Clearance Needed:

Ensure you have at least the recommended amount of floor space around the

GTX600. If this space is not secure, you will have to move peripherals or the printer

when trying to access the rear panels or the back side of the printer.

Inches

Metric

Front of GTX600 31.5” 80 cm

Left and Right Side 31.5” 80 cm

Back of GTX600 15.7” 40 cm

Top of GTX600 17.7” 45 cm

Connecting to a Water Source

I understandthat a water source will needto be available prior to installation. If using a water supply line, the

water source must be free of minerals and contaminants.

GTX600 features an internal humidifier that is designed to maintain an optimal printing environment. As such, water for

the humidifier is supplied via a Water Supply Tube.

The source of water is dependent on the needs of your facility.

Water can be supplied via:

1. A direct line from pure water, such as a tank of distilled water.

2. Via a water pipe, with a regulator and ion filter to ensure clean water.

IMPORTANT

•Water tube dimensions are OD6 mm 1/4inch

•Do not use the optional humidifier water supply tube to connect to tap water piping.

•If non-pure water, such as tap water,

is used, white powdery impurities will adhere to

the inside of the unit, causing damage to the printer and heads.

•If using a regulator in the water line setup, ensure that the pressure supplied is

.2PMa or less to the printer.

Items not Provided withPurchase

Ensure the proper supplies are present suchas:

•Lift table for lifting the 18Link tank in machine ink tanks. Example: Hydraulic Table Cart

•An Agitation Device; such as Santint G48, for high ink usage; or a Fitness machine for low to intermediate ink usage. It is best to pick the agitation device based

on how often you will use an 18Ltank of white ink. You must have a device available to use even if neither of these examples are purchased.

•5 gallonsof distilled water.

•A32 oz. or 1 liter plasticmixing container withaspout.

•Siliconcoated parchment paper which comesin 16”X24” sheets.

•Agram scale for pretreatmentcalibrationwith the abilityto read in 1 gramincrements

•An Evaporative Humidifierif the room the printer is goingto be locatedin does not meet environmental conditions. Example of suggested humidifier;

VornandoEvaporative Humidifier.

•TestGarmentsor productthat will be printedon by you or your groupwhen you start production.

•1 ream of white paper(8.5”X11”)

•You will be supplied with someBlack paper for calibrationsandnozzlechecks with white ink. If additionalareneededyou willneedto orderPart number

GTSKIN811B from you authorized dealer or Brother.

•If a Schulzepretreatmentmachineis purchased;the following itemswillbe needed:

-Aerosol Siliconspray for treating the rails periodically

-SchulzePretreatCleanercleaningsolution, (which can be purchased throughyour dealeror atthe Partner Portal) see last page.

- Aqua lube marine grease

•If a heatpress machineother than one purchasedfrom Brotheris to be used the followingitems are needed:

-upperand lowernon stick(Teflon)coversor sheets (for the curing of pretreat andink) (can be purchasedthrough your dealeror atthe Partner Portal)

-IfAir fusion purchased, a compressoror airline capable of supplying sustained 80 psi pressure will be needed.

I understandthat the suppliesneeded to properly have the purchased equipmentinstalledneedto be

available at the time ofinstallation.

Tabla de contenidos

Otros manuales de Impresora de Brother

Brother

Brother DCP-T520W Manual de usuario

Brother

Brother HL-1118 Manual de usuario

Brother

Brother GTXpro BULK DTF R2R Manual de usuario

Brother

Brother MFC-T920DW Manual de usuario

Brother

Brother MFC-8870DW Manual de instrucciones

Brother

Brother HL-L5210DN Manual de usuario

Brother

Brother GTX Manual de usuario

Brother

Brother HL 5030 - B/W Laser Printer Manual de usuario

Brother

Brother MFC-J5335DW Manual de usuario

Brother

Brother MFC-J5845DW Manual de usuario

Brother

Brother GTX600NB Manual de usuario

Brother

Brother HL-1050 Manual de uso y cuidado

Brother

Brother HL-3040CN Guía de inicio rápido

Brother

Brother TC-32B Manual de usuario

Brother

Brother MFC-5200C Manual de usuario

Brother

Brother HL-1260E Manual de usuario

Brother

Brother HL-3040CN Manual de usuario

Brother

Brother HL-2460 Series Manual de usuario

Brother

Brother HL-8050N Manual de usuario

Brother

Brother DCP-J515W Instrucciones de montaje

Brother

Brother HL-B2000D Manual de usuario

Brother

Brother TP-M5000N Manual de funcionamiento

Brother

Brother HL-4200CN Manual de usuario

Brother

Brother HL-1240 Manual del propietario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario