Brother GT-3 Series Manual de usuario

Otros manuales para GT-3 Series

10

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Impresora de Brother

Brother

Brother HL-L2440DW Manual de usuario

Brother

Brother HL-2460 Series Manual de usuario

Brother

Brother HL-1440 Manual de usuario

Brother

Brother m-PRINT MW-100 Manual de usuario

Brother

Brother HL 760 - B/W Laser Printer Manual de usuario

Brother

Brother HL-4040CN Manual de usuario

Brother

Brother HL-5380DN Manual de usuario

Brother

Brother TN 430 Manual de usuario

Brother

Brother MP-21C Manual de usuario

Brother

Brother HL-5170DN Manual de usuario

Brother

Brother HL-2460 Series Manual de usuario

Brother

Brother DCP-J562DW Manual técnico

Brother

Brother HL-5240 Manual de usuario

Brother

Brother HL-2240 Manual de usuario

Brother

Brother DCP-9045CDN Manual de usuario

Brother

Brother hl 1650 - B/W Laser Printer Manual de usuario

Brother

Brother HL-4040CN Manual de usuario

Brother

Brother ep44 Manual de usuario

Brother

Brother DCP-T220 Manual de usuario

Brother

Brother RuggedJet RJ-4030 Manual de usuario

Brother

Brother DCP-9045CDN Manual de usuario

Brother

Brother RuggedJet RJ3150Z1 Manual técnico

Brother

Brother DCP-1510 Manual de usuario

Brother

Brother HL 760 - B/W Laser Printer Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario

Changing the Ink Tubes

1. Make sure the GT-3 is not in the middle of any operation.

2. Select head replacement from the maintenance menu, and choose the color tube to

be replaced and press okay.

3. Remove the cartridge of the target color, and press the okay button.

4. Insert the filter cartridge to the ink cartridge slot, and then press the okay button (the

ink draining begins).Wait until the message “Turn off & please change head”

appears.

5. Turn off the GT-3.

6. Remove the back cover (6 screws) & ink bay cover (3 screws).

7. Begin to remove the brackets that hold the tubes together including the tube

connector (taking note of placement on each). Keep ready 2 tube caps to seal the

end of the tubes.

G

GT

T

D

DI

IG

GI

IT

TA

AL

L

G

GA

AR

RM

ME

EN

NT

T

P

PR

RI

IN

NT

TE

ER

RS

S

For Technical Assistance Please Call Toll Free

1-877-4BROTHER Email: [email protected]

8. Remove the tube from the needle, and remove the needle (17mm wrench) and

clean/flush the needle.

9. Once the tube is completely removed, take off the spiral, middle tube holders, and

middle tubes, and tube clamp.

10.Mark the new tube according to the tube diagram. The new tube will come with a

coupling.

11.Attach the parts taken off from step 9.

12.Start attaching the new tube starting with the print head side first, then proceeding

with the middle tube holders, and ending with the needle. Take note that the middle

tube holder and middle tube should be installed opening to opening.

13.Move the carriage by hand to make sure there are no “binds” or “kinks” in the tube.

14.Press the platen button to eject the platen.

15.Press the Up/Down button to select “initial” cleaning mode, and then press the okay

button.

16.Press the Up/Down button to select the color you have replaced the tube, and then

press the okay button.

17.The initial cleaning process begins.

18.Press the cancellation button to return to the main menu.

19.Perform a nozzle check (from the test print menu) and do cleanings (normal or

powerful as needed.

20. Attach the covers from step 6.