Brookstone Photo Printer Manual de usuario
CONVERT PHOTOS TO DIGITAL FILES—
NO COMPUTER NEEDED
Instant Photo Digitizer
iCONVERT®
1
TablE Of CONTENTs
CautionandWarnings.....................................................2
LocationofPartsandControls.............................................5
Supported Memory Card Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
LEDIndicatorLightKey...................................................9
Operation................................................................10
CalibratingtheScanner...................................................10
Suitable and Unsuitable Types of Originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Scanning................................................................11
OrientationoftheScannedImage.........................................13
CroppingonScannedImages.............................................13
UsingtheAnti-CurlSheath................................................14
ConnectingtheScannertoaComputer....................................15
FileNamingandStorageRules............................................17
EditingYourPhotosAfterScanning........................................18
CareandMaintenance....................................................18
Specifications............................................................21
Troubleshooting..........................................................22
Warranty.................................................................25
2
CaUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
THERE ARE NO SERVICEABLE PARTS INSIDE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
The lightning flash with arrow-head symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the unit’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the unit.
IMPORTaNT safETY INsTRUCTIONs
All of the safety and operating instructions should be read, adhered to and followed
before the unit is operated.
saVE ThEsE INsTRUCTIONs
•
•
DaNGER
To reduce the risk of electric shock, burns, fire or injury:
Do not use while bathing or in a shower.
Do not place or store unit where it can fall or be pulled into a tub or sink.
Do not place in, drop or submerge in water or other liquid.
Do not reach for unit that has fallen into water. Unplug it immediately.
Care should be taken so that objects do not fall and liquids are not
spilled onto the unit.
WaRNING
Close supervision is necessary when this appliance/product is used
by or near children or mentally disabled individuals.
Use this unit only for its intended use as described in this manual.
Unplug this unit during lightning storms or when unused for long
periods of time.
Never drop or insert an object into any opening other than instructed
in this manual.
Protect the power cord from being walked on or pinched, particularly at
plug outlets, convenience receptacles and the point where it exits the unit.
Do not allow cord to touch hot surfaces. Wrap cord loosely around
the unit when storing or detach the cord and store separately.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
3
7. The unit should be situated away from direct sunlight or heat sources such
as radiators, electric heaters, heat registers, stoves or other units (including
amplifiers) that produce heat. Avoid placing on top of stereo or computer
equipment that radiates heat.
8. Never block the air openings of the unit with materials such as clothing,
plastic bags or papers, or place it on a soft surface such as a bed or couch,
where the air openings may be blocked.
9. Do not overload the electrical outlet. Use only the power source as indicated.
10. Never operate this unit if it has a damaged cord or plug, if it is not working
properly, or if it has been dropped or damaged, or dropped into water. If the
unit’s power supply cord or plug is damaged, do not attempt to fix it yourself.
11. To avoid the risk of electric shock, do not disassemble or attempt to repair
the unit. Incorrect repair can cause risk of electric shock or injury to persons
when unit is used.
12. Do not operate in the presence of explosive and/or flammable fumes.
13. Never remove the plug from the outlet by pulling the power cord.
4
5
lOCaTION Of PaRTs aND CONTROls
6
5
4
3
2
1
6
lOCaTION Of PaRTs aND CONTROls
STATUS/CARD INDICATOR:
Indicates the operating status of the scanner and memory card.
See “LED Indicator Light Key” on page 9.
POWER BUTTON:
Press this button to turn the power on or off.
POWER INDICATOR:
Indicates the power status of the scanner. See “LED Indicator Light Key”
on page 9.
PAPER GUIDE:
Used to guide the original to ensure the alignment.
FEEDING SLOT:
Insert an original into this slot to begin scanning.
ORIENTATION MARK:
Indicates the correct original orientation.
1.
2.
3.
4.
5.
6.
lOCaTION Of PaRTs aND CONTROls
7
4
3
2
1
lOCaTION Of PaRTs aND CONTROls
OUTPUT SLOT:
The scanned original comes out from this slot.
SD/XD/MMC/MS CARD SLOT:
Accepts the following types of memory cards: SD, xD, MMC and MS.
See “Supported Memory Card Types” below for details.
MINI USB OUTLET:
For connecting to a computer (or digital photo frame) via a USB cable.
POWER OUTLET: For connecting to the supplied power adapter.
1.
2.
3.
4.
8
sUPPORTED MEMORY CaRD TYPEs
MS
MS Pro
MS Pro Duo
MS Duo (use with adapter—not included)
MMC
RS-MMC (use with adapter—not included)
xD (H-type, M-type and upcoming types)
SD/SDHC SD 2.0
Mini SD (Mini SDHC/with adapter—not included)
Micro SD (T-Flash, Micro SDHC/with adapter—not included)
•
•
•
•
•
•
•
•
•
•
lED INDICaTOR lIGhT kEY
9
Blinking slowly
Off
Steadily on
Blinking rapidly
Power Status/Card
Scanner is ready for use at the 300dpi (default) setting.
The scanning resolution is set to 600dpi.
Scanning current original. Please wait until the
process is complete before scanning another original.
The scanner power is off.
Initializing system and memory card. Please wait until the
Initialization process is complete before using the scanner.
Busy storing image file. Please wait until the
process is complete before scanning another original.
Paper jam. See page 24 for paper jam solution.
Calibration error. Call Brookstone Customer Service at
800-846-3000
No memory card, card full (free space below 1MB), card error
or SD card is locked. Please use another card, unlock the
card or remove some files on the card.
Tabla de contenidos
