broda APP Manual de usuario
INTRODUCING THE
FROM
Installation Instructions
app Bolster Application
1) Slide the Bolster on to the Wing with the buckles facing the chair
2) Place the buckles through the straps of the chair and around Bolster to buckle
3) Buckle the Bolster in place and adjust buckle/straps as needed to ensure the Bolster in safely secured
123Final
app Foot Piece Application
1) Locate the opening on the bottom portion of the Foot Pad
2) Slide foot pad on to foot rest, then flip footrests up
3) Snap buckles to hold foot pad in place
1 2 3
Final
app Calf Pad Application
1) Slightly raise the legrest and fold down the footrest
2) Position the Calf Pad so that it is lying flat against the calf rest and place the attached
cover over the top strap of the calf rest
3) Wrap the buckles around the side of the calf rest securing the calf pad in place
4) Adjust straps as needed to ensure calf pad stays in place and is secure
1
234
app Seat Application
1234
1) Remove existing padding on the wing, back, seat,leg and foot rest
2) Place the app Seat Cushion on to the seat with buckles facing the seat
3) Connect the buckles by placing them through the straps of the chair
4) Adjust the straps as needed to appropriately secure the seat cushion to the chair
5) Ensure all extra strapping is safely tucked away under the chair
app Back Application
1
2
34
1) Remove existing cushions from the back of the chair
2) Place the app Back on the back of the chair with the buckles facing the back of the chair and
the bottom of the back cushion resting on the seat cushion of the chair
3) Place the flap and buckles through the strap on the back of the chair once the app back
cushion is in the desired position
4) Fasten the buckles by wrapping them through the straps and around the chair, adjust the
straps as needed to ensure safe placement of the app back
app Headpiece Application
123
1) Remove headrest/pillow from chair
2) Place the APP headrest on to the chair with the bottom portion of the headrest resting on top
of the back cushion
3) Place flap and buckles over the top strap of the chair (flap and buckles go between the bar and
strap) and then fasten the buckles securely and adjust them as needed to ensure secure
placement of the headrest (headrest may snap onto head piece if not already attached)
Tabla de contenidos
Otros manuales de Silla de ruedas de broda
broda
broda 30VT Instrucciones de funcionamiento y seguridad
broda
broda 985 V1 Manual de usuario
broda
broda HSP Manual de usuario
broda
broda Travrsa-LT Manual de usuario
broda
broda ComfortTilt 587 Instrucciones de instalación
broda
broda WC-19 Manual de usuario
broda
broda 785 Tilt Recliner Manual de usuario
broda
broda ComfortTilt 587 Manual de usuario
broda
broda ClearPath Manual de usuario
broda
broda 500 MR Manual de usuario
