Briggs & Stratton 130G00 Instrucciones de funcionamiento

Not for

Reproduction

Not for

Reproduction

Not for

Reproduction

Foreword

This manual was written to assist engine technicians and service personnel with the maintenance and repair

procedures for Briggs & Stratton® engines. It assumes that persons using this manual have been properly

trained and are familiar with the service procedures for these products, including the proper use of required

tools and the application of appropriate safety practices. Persons untrained or unfamiliar with these procedures

or products should not attempt to perform such work.

Proper maintenance and repair is important to safe, reliable operation of all engines and engine-driven

systems. The maintenance, troubleshooting, and repair procedures described in this manual are appropriate

for the Briggs & Stratton engines described herein. Alternative methods or procedures may pose risks to

both personal safety and engine reliability and are not endorsed or recommended by Briggs & Stratton.

All information, illustrations, and specifications contained in this manual were based on the data available

at the time of publication. Briggs & Stratton Corporation reserves the right to change, alter, or otherwise

improve the product or the product manuals at any time without prior notice.

Briggs & Stratton offers two complementary publications to enhance understanding of engine technology,

maintenance, and repair. However, neither publication is a substitute for a recognized training program for

engine technicians.

• For consumers,

Small Engine and Equipment Maintenance Guide

(Part No. CE8155) provides a

comprehensive overview of how small air-cooled engines work, basic troubleshooting, and step-by-step

maintenance procedures.

• For engine technicians and consumers alike, an in-depth study of engine theory and operation can be

found in the textbook

Small Engines

(Part No. CE8020).

Both publications can be purchased at BRIGGSandSTRATTON.COM or through a local Briggs & Stratton

Authorized Service Dealer.

No part of this manual may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying or recording by any information storage and retrieval system, without

prior written permission from Briggs & Stratton Corporation.

Not for

Reproduction

This engine repair manual includes the following engine models:

• MODEL 130G00

• MODEL 131G00

• MODEL 13R200

• MODEL 13U100

• MODEL 13U200

NOTE: Some models have limited service parts. Review the

Illustrated Parts List

for part availability

before conducting any service work.

NOTE: The images in this document are representative and may differ according to model.

Not for

Reproduction

HOW TO USE THIS MANUAL

Besides describing the service maintenance tasks and the intervals at which they are to be performed, two

basic levels of service are presented in this manual: engine top end service and engine bottom end service.

The manner in which these instructions are used depends upon the tasks to be performed and the level of

disassembly required.

Remove External Assemblies

To prepare the engine for service, whether top or bottom end, first see

SECTION 4 - REMOVE EXTERNAL

ASSEMBLIES

to remove the air cleaner, fuel tank, carburetor, etc. The order in which the topics are

presented is the order in which the assemblies are most easily removed from the engine.

NOTE: A few exceptions to this rule do exist, such as the muffler and rewind starter, which may be serviced

without having to remove other external assemblies.

Top End Service

If servicing only cylinder head components, see

SECTION 5 - DISASSEMBLE ENGINE, TOP END

DISASSEMBLY,

and then proceed to

SECTION 6 - SERVICE ENGINE SUBASSEMBLIES, CYLINDER

HEAD.

When cylinder head service is complete, see

SECTION 7 - ASSEMBLE ENGINE, TOP END

ASSEMBLY.

Bottom End Service

If servicing bottom end components, such as the piston, connecting rod, crankshaft, etc., first see

SECTION

5 - DISASSEMBLE ENGINE, TOP END DISASSEMBLY,

and then proceed to

BOTTOM END

DISASSEMBLY

in the same section. When finished, move to

SECTION 6 - SERVICE ENGINE

SUBASSEMBLIES,

and see

PISTON AND CONNECTING ROD; FLYWHEEL, CRANKSHAFT AND

CAMSHAFT;

and

CRANKCASE AND CRANKCASE COVER,

for all service instructions. When bottom

end service is complete, see

SECTION 7 - ASSEMBLE ENGINE, BOTTOM END ASSEMBLY,

and then

proceed to

TOP END ASSEMBLY

in the same section.

Install External Assemblies

When the top and bottom ends of the engine are assembled, see

SECTION 8 - INSTALL EXTERNAL

ASSEMBLIES

to complete the project. The order in which the topics are presented is the order in which

the assemblies are most easily installed on the engine. These instructions also include any cleaning,

inspection, or adjustments that may be recommended.

Not for

Reproduction

Not for

Reproduction

SECTION 1 – SAFETY AND GENERAL INFORMATION

SECTION 2 – MAINTENANCE

SECTION 3 – TROUBLESHOOTING/SPECIAL TOOLS

SECTION 4 – REMOVE EXTERNAL ASSEMBLIES

SECTION 5 – DISASSEMBLE ENGINE

SECTION 6 – SERVICE ENGINE SUBASSEMBLIES

SECTION 7 – ASSEMBLE ENGINE

SECTION 8 – INSTALL EXTERNAL ASSEMBLIES

SECTION 9 – SPECIFICATIONS

Not for

Reproduction

Not for

Reproduction

SECTION 1 – SAFETY AND GENERAL INFORMATION

SAFETY - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

Safety Alert Symbol and Signal Words - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

Hazard Symbols and Meanings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

General Safety Messages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

GENERAL INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

Engine Identification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

Fuel Recommendations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

High Altitude - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

Oil Recommendations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

Storage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8

Not for

Reproduction

SAFETY

This manual contains safety information that will:

• Make you aware of hazards associated with engines.

• Inform you of the risk of injury associated with those

hazards.

• Instruct you how to avoid or reduce the risk of injury.

Safety Alert Symbol and Signal Words

The safety alert symbol is used to identify safety

information about hazards that can result in personal injury.

A signal word (DANGER, WARNING, or CAUTION) is used

with the alert symbol to indicate the likelihood and the

potential severity of injury. In addition, a hazard symbol may

be used to represent the type of hazard.

DANGER indicates a hazard which, if not avoided, will

result in death or serious injury.

WARNING indicates a hazard which, if not avoided,

could result in death or serious injury.

CAUTION indicates a hazard which, if not avoided,

could result in minor or moderate injury.

NOTICE

indicates an situation that could result in damage

to the product.

Hazard Symbols and Meanings

MeaningSymbolMeaningSymbol

Read and understand the

Operator's Manual before

operating or servicing the

unit.

Safety information

about hazards that can

result in personal

injury.

Explosion hazardFire hazard

Explosion hazardShock hazard

Toxic fume hazardHot surface hazard

Chemical hazardAmputation hazard -

moving parts

Thrown object hazard -

wear eye protection

Kickback hazard

Amputation hazard -

entanglement

General Safety Messages

Prior to work, read and understand the section(s) of this

manual that pertain to the job. Follow all safety warnings.

• Always use fresh gasoline. Stale fuel can cause gum

deposits in the carburetor and cause leakage, flow

restrictions, or other problems.

• Check fuel lines and fittings frequently for cracks or

leaks and replace if necessary.

WARNING

Before attempting to service this equipment, read and

understand this manual and the operating instructions of

the engine and the equipment.

WARNING

Failure to follow instructions could result in serious injury

(including paralysis) and even death.

WARNING

Battery post, terminals, and related accessories contain

lead and lead compounds - chemicals known to the State

of California to cause cancer and reproductive harm. Wash

hands after handling.

WARNING

Certain components in this product and its related

accessories contain chemicals known to the State of

California to cause cancer, birth defects, or other

reproductive harm. Wash hands after handling.

WARNING

Briggs & Stratton Engines are not designed for and are

not to be used to power: fun-karts; go-karts; children's,

recreational, or sport all-terrain vehicles (ATVs);

motorbikes; hovercraft; aircraft products; or vehicles used

in competitive events not sanctioned by Briggs & Stratton.

For information about competitive racing products, see

www.briggsracing.com. For use with utility and

side-by-side ATVs, please contact Briggs & Stratton Power

Application Center, 1-866-927-3349. Improper engine

application may result in serious injury or death.

WARNING

The engine exhaust from this product contains chemicals

known to the State of California to cause cancer, birth

defects, or other reproductive harm.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Motor de Briggs & Stratton

Briggs & Stratton

Briggs & Stratton 31F700 Series Guía de configuración

Briggs & Stratton

Briggs & Stratton 120000 Manual de usuario

Briggs & Stratton

Briggs & Stratton 194700 Series Instrucciones de instalación

Briggs & Stratton

Briggs & Stratton 120000 Manual de instalación y operación

Briggs & Stratton

Briggs & Stratton 21B900 Series Guía de configuración

Briggs & Stratton

Briggs & Stratton 080000 Manual de usuario

Briggs & Stratton

Briggs & Stratton 19D Instrucciones de funcionamiento

Briggs & Stratton

Briggs & Stratton Vanguard 470000 Series Manual de usuario

Briggs & Stratton

Briggs & Stratton Vanguard 540000 Series Manual

Briggs & Stratton

Briggs & Stratton 40F700 Series Guía de configuración

Briggs & Stratton

Briggs & Stratton Vanguard 130000 Manual de usuario

Briggs & Stratton

Briggs & Stratton 400000 Professional Series Manual de usuario

Briggs & Stratton

Briggs & Stratton Vanguard 290000 Manual de usuario

Briggs & Stratton

Briggs & Stratton 400000 Professional Series Manual de referencia

Briggs & Stratton

Briggs & Stratton 31N800 Series Guía de configuración

Briggs & Stratton

Briggs & Stratton Vanguard 540000 Series Manual de usuario

Briggs & Stratton

Briggs & Stratton 170700 Series Manual

Briggs & Stratton

Briggs & Stratton Vanguard 05000 Manual de usuario

Briggs & Stratton

Briggs & Stratton Vanguard 290000 Manual de instalación y operación

Briggs & Stratton

Briggs & Stratton Vanguard 110000 Manual de usuario

Briggs & Stratton

Briggs & Stratton 31D707 Manual de usuario

Briggs & Stratton

Briggs & Stratton Vanguard EFI 61E600 Manual de usuario

Briggs & Stratton

Briggs & Stratton 21000 Series Manual de instalación y operación

Briggs & Stratton

Briggs & Stratton 21000 Series Manual de instalación y operación

Manuales populares de Motor de otras marcas

Rotax

Rotax 125 senior MAX evo Manual de usuario

Kohler

Kohler K361 Manual de usuario

MTD

MTD OHV Series Manual de usuario

Kohler

Kohler COMMAND CH18-745 Manual de usuario

Mercury

Mercury D4.2L D-Tronic Manual de usuario

Selve

Selve SE Plus-RC Series Manual de usuario

Perkins

Perkins 1206E-E66TA Manual de usuario

Skov

Skov DA 174 Manual

Rossi

Rossi TX11 Series Manual de usuario

Siemens

Siemens SIMOTICS T-1FW3 Hoja de instrucciones

AL-KO

AL-KO PRO 350 Manual de usuario

MTU

MTU 12 V 4000 Lx4 Manual de usuario

Nanni

Nanni N3.30 Manual de instrucciones

Nanni

Nanni N5.160 CR2 Manual de usuario

KSB

KSB SuPreme Series Instrucciones de instalación

Hiwin

Hiwin EM1 Series Manual de usuario

Rotax

Rotax 912 i series Instrucciones de funcionamiento

Siemens

Siemens SIMOTICS XP 1MB1 Manual de usuario