BrickElectric BEM11000 Manual de usuario

www.BrickElectric.com

BrickElectric Ethernet I/O

BEM11000

Excellent network building block

Features

⚫WEB control

⚫Modbus-TCP

⚫X-Connect

⚫Hardware Reset

⚫IEEE 802.3at / 802.3af POE Compatible

⚫EasyBus - simple solution

⚫Windows Desktop App

⚫LAN mode

⚫DHCP / DNS

⚫Password Protection

⚫2 CH Relay Outputs

⚫SNMP V1 / V2C

Introduction

BEM11000 is POE Supply Input, Ethernet Remote I/O Module, with 2 output Relays channels

remote control module. Its Ethernet connector provides 10/100baseT interface.

It supports EasyBus –simple solution, HTTP, SNMP, Auto ping and Modbus-TCP control

protocols, suitable for being used with servers, computers, mobiles, routers, etc., to provide remote

control and monitor.

With DHCP / DNS functions, it can be configured together with servers very flexible.

BEM11000 is a new generation product with more functions and higher stability.

www.BrickElectric.com 
 
Table of Contents 
Device Overview............................................................................................................................3 
1 General Ratings ...................................................................................................................3 
2 Connection Diagram............................................................................................................3 
Specifications ................................................................................................................................3 
1 Recommended Operating Conditions.................................................................................3 
2 Default Software Settings....................................................................................................4 
Easy Start.......................................................................................................................................5 
1 HTTP Mode..........................................................................................................................5 
2 LAN Mode............................................................................................................................6 
General Functionality....................................................................................................................7 
1 Basic Network Communications .........................................................................................7 
2 Save Parameters..................................................................................................................7 
3 Reboot.................................................................................................................................7 
3 DHCP Function ....................................................................................................................8 
4 Static IP Address..................................................................................................................8 
5 Relay outputs control..........................................................................................................9 
7 Http port setting................................................................................................................11 
8 Hardware reset button......................................................................................................12 
9 Identification & customized information ..........................................................................12 
10 Easybus Server/Client Mode ...........................................................................................13 
Auto ping and reboot mode........................................................................................................17 
X-Connect....................................................................................................................................23 
1 X-Connect Map Setting......................................................................................................23 
2 X-Connect Map Parameter List..........................................................................................24 
Modbus-TCP................................................................................................................................26 
SNMP...........................................................................................................................................27 
1 SNMP commands example................................................................................................27 
Program Reference......................................................................................................................28 
1 Easybus Specifications.......................................................................................................28 
Support & Contact us................................................................................................................33 
 
 
 
 
 
 
 
 
 
 

www.BrickElectric.com

1. Device Overview

1.1 General Ratings

Power Consumption

3W max.

Operation Temperature

-30℃to +85℃

Module Size

91mm x 53mm x 18mm

Weight

1.2 Connection Diagram

Fig. 1.1

2. Specifications

2.1 Recommended Operating Conditions

Parameters

At T = 25℃, unless otherwise specified.

Symbol

Values

Unit

Min.

Typ.

Max.

POE Supply Voltage (IEEE 802.3af/at)

Relay Rating

250VAC/10A

125VAC/10A

24VDC/10A

12VDC/10A

www.BrickElectric.com

2.2 Default Software Settings

Default Settings

⚫IP Setting:

IP address: 192.168.1.105

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

DHCP: disable

⚫Latest Firmware Version

V100.0-02

You can download latest firmware for

free.

⚫HTTP function

State: Enable

Port: 80

⚫TCP function

State: Enable

Port: 5000

www.BrickElectric.com

3. Easy Start

A Practical step-by-step operation guide for starters

This part is a step-by-step tutorial explaining how to start with BEM11000. We'll not discuss too

much details here. The only idea here is to make it work by minimum steps. For more

information, please refer to later chapters.

3.1 HTTP Mode

1. Connect BEM11000 with your routers or computer via a standard Ethernet POE cable. (see

fig.1.1 at page 2)

2. Open any Browser, for example Chrome is used here as demonstration. Please enter URL:

http://192.168.1.105/setpara[45]=2. Relay channel 1 will be toggled, and a message will be

returned to your browser. Congratulations!

www.BrickElectric.com

3.2 LAN Mode

1. Connect BEM module with your routers or computer by Ethernet POE cable. (see fig.1.1 at

page 2)

2. Open any TCP test tool (if you don't have any, or you don't know what a TCP test tool is, you

can use BE-Manager, it is within our software package). Open it and see the following Fig.1.2:

Fig.1.2

3. Click "Connect" button, and wait for module connected. Then, it is able control the relay

module. Click "CH1 OFF" button, and the relay channel 1 will be switched on. See Fig.1.3

Fig.1.3

www.BrickElectric.com

4. General Functionality

4.1 Basic Network Communications

The main method of communication to BEM11000 is a standard Ethernet communication.

This communication protocol makes use of Network Sockets or HTTP protocol to create

point to point tunnels that data can flow through bi-directionally. In this way, the computer

that is controlling the relay can send commands and shortly thereafter receive the

response through the same Socket/Web Page.

Communications

In most programming languages, all you need to do to open a socket is to import the

appropriate plug-in, build the socket object, and connect the socket using the IP Address

and Port Number of the target device.

MAC Address

You can find the MAC Address of the module at the simple start manual delivered together

with module package. You can also change the MAC address to use your own MAC

address.

4.2 Save Parameters

After power cycle, BEM11000 will lose its parameter modifications if you don't actively

require it to save modified parameters into internal nonvolatile memory. For examples, IP

Address, Gateway address and Net mask.

Assuming module current IPAddress is 192.168.1.105 for all the following commands.

Save parameters

To save parameters:

Web access URL:

http://192.168.1.105/setpara[28]=1

Socket command text:

setpara[28]=1;

4.3 Reboot

Send the module a restart signal so it will restart itself. Some parameters modifications

are only effective after a reboot or power cycle. Parameters modifications will be lost if

you don't save them before reboot or power cycle operation.

Assuming module current IPAddress is 192.168.1.105 for all the following commands.

Reboot

To reboot device:

www.BrickElectric.com

Web access URL:

http://192.168.1.105/setpara[61]=1

Socket command text:

setpara[61]=1;

4.3 DHCP Function

BEM11000 supports both DHCP and static IP Addressing. For communication reliability,

we recommend using a Static IP Address when you feel comfortable doing so. This will

ensure that the device will always be where you expect it to be, when you try to connect to

it.

DHCP stands for Dynamic Host Configuration Protocol and basically means that your

router will assign the first available IP Address in the list of IP Addresses Range to your

device. This technology makes network devices very easy to use, but it is not as reliable

because in certain circumstances it will cause the IP Address it assigns to change. DHCP

mode is recommended when you only use Internet control, or your local software is able

to detect module IP changes.

Assuming module current IPAddress is 192.168.1.105 for all the following commands.

Enable/Disable DHCP

Note: modification only effective after parameter saving and module reboot.

To Enable DHCP:

Web access URL:

http://192.168.1.105/setpara[0]=1

Socket command text:

setpara[0]=1;

To Disable DHCP and use static IP:

Web access URL:

http://192.168.1.105/setpara[0]=0

Socket command text:

setpara[0]=0;

4.4 Static IP Address

This technology is the antithesis of DHCP in that it is manually set IP address and does

not dynamically change without direct action. The disadvantage of this method is that, if

done incorrectly, can make the module unreachable through any standard means. This

usually happens when an IPAddress is statically set to an IPAddress outside of the range

of the router, or another device on the network obtains this IP address via DHCP. If this

happens, see the section of this guide titled “Reset Function”. This method is the preferred

and more reliable way to handle network IP Address allocation. For improved reliability,

the IPAddress assigned to this Module should be reserved on your router.

www.BrickElectric.com

To work correctly in static IP address mode, you need to set correct IP address, gateway

address and subnet mask. The following content describes how to modify each of them.

If module is currently in DHCP mode, to set a new static IP address you need to

disable DHCP mode at first. After settings are done, please save parameters and

reboot the device to make it effective.

Assuming module current IPAddress is 192.168.1.105 for all the following commands.

Set static IP Address

Note: modification only effective after parameter saving and module reboot.

To set static IPAddress to 192.168.2.100:

Web access URL:

http://192.168.1.105/setpara[1]=192

http://192.168.1.105/setpara[2]=168

http://192.168.1.105/setpara[3]=2

http://192.168.1.105/setpara[4]=100

Socket command text:

setpara[1]=192;setpara[2]=168;setpara[3]=2;setpara[4]=100;

Set static Gateway Address

Note: modification only effective after parameter saving and module reboot.

To set static Gateway Address to 192.168.2.1:

Web access URL:

http://192.168.1.105/setpara[5]=192

http://192.168.1.105/setpara[6]=168

http://192.168.1.105/setpara[7]=2

http://192.168.1.105/setpara[8]=1

Socket command text:

setpara[5]=192;setpara[6]=168;setpara[7]=2;setpara[8]=1;

Set static Net Mask

Note: modification only effective after parameter saving and module reboot.

To set static net mask to 255.255.255.0

Web access URL:

http://192.168.1.105/setpara[9]=255

http://192.168.1.105/setpara[10]=255

http://192.168.1.105/setpara[11]=255

http://192.168.1.105/setpara[12]=0

Socket command text:

setpara[9]=255;setpara[10]=255;setpara[11]=255;setpara[12]=0;

4.5 Relay outputs control

In the following contents, assuming current IP Address is 192.168.1.105. If you need to

www.BrickElectric.com

switch different channels please replace parameter index to the value you need. For

example, if you want control ch2, you may replace “setpara[45]” with "setpara[46]".

Normal ON/OFF/TOGGLE

Normal on/off/toggle operation changes the relay output status immediately after receiving

commands. No timing features included.

Switches

To switch off ch1 output:

Web access URL:

http://192.168.1.105/setpara[45]=0

Socket command text:

setpara[45]=0;

To switch on ch1 output:

Web access URL:

http://192.168.1.105/setpara[46]=1

Socket command text:

setpara[46]=1;

Tabla de contenidos

Otros manuales de Relé de BrickElectric

BrickElectric

BrickElectric BEM107 Manual de usuario

BrickElectric

BrickElectric BEM105 Manual de usuario

BrickElectric

BrickElectric BEM104 Manual de usuario

Manuales populares de Relé de otras marcas

Shelly

Shelly Pro Series Manual de usuario

GE MVAX 11 Manual de usuario

ABB

ABB RELION REF615R Manual de usuario

Pilz

Pilz PNOZ X10 Manual del propietario

ABB

ABB SPAJ 142 C Manual de lista de piezas

Kemo Electronic

Kemo Electronic B197 Manual de usuario

Seg

Seg MRM3 Manual de usuario

Basler

Basler BE1-700C Manual de usuario

CD Automation

CD Automation REVEX 2PH 280A Manual de usuario

Ruelco

Ruelco 1S04 Manual de usuario

Basler

Basler V3E Z1P B2C1F Manual de usuario

Doepke

Doepke Dupline DSM 2 Manual de usuario

Siemens

Siemens SIRIUS 3RT1966-4D Manual de usuario

GE DGP Manual de usuario

Kyongbo Electronics

Kyongbo Electronics GDR-D01 Manual de usuario

Siemens

Siemens SIPROTEC 4 Manual de usuario

Siemens

Siemens BD2-AK03X/FS Series Manual de usuario

Leuze

Leuze MSI-SR5B Manual de usuario