BRG DuraTime HP Manual de usuario

Analog and Digital Clock

Installation and Operation Manual

BRG Precision Products

600 N. River

Derby, Kansas 67037

http://www.brgproducts.com

[email protected]

316-788-2000

Fax: (316) 788-7080

Updated: 9/4/2018

Our mission is to offer innovative technology solutions and exceptional service.

Table of Contents

WARRANTY AGREEMENT .................................................................................................................................... 3

OVERVIEW ................................................................................................................................................................ 9

INSTALLATION....................................................................................................................................................... 11

DIGITAL CLOCK OPERATION ........................................................................................................................... 12

TIMER CONFIGURATION EXAMPLES ............................................................................................................. 16

UP-DOWN COUNTER CONFIGURATION ......................................................................................................... 23

COUNTER CONFIGURATION EXAMPLES ...................................................................................................... 24

ALARM CONFIGURATION .................................................................................................................................. 25

ALARM CONFIGURATION WORKSHEET ....................................................................................................... 26

INFRARED REMOTE CONTROL ........................................................................................................................ 27

MEGA TIGER PROCESSOR CONFIGURATION MENU ................................................................................. 28

ANALOG CLOCK OPERATION ........................................................................................................................... 12

INDEX ......................................................................................................... ERROR! BOOKMARK NOT DEFINED.

Warranty Agreement

BRG Precision Products One Year Warranty

1. Term of Coverage

Coverage will be for 1 year. Claims must be made during the Warranty Period. This Agreement is not renewable.

The warranty becomes null and void if complete payment is not made within the terms specified under Terms of

Payment.

2. Warranty

BRG Precision Products, Inc. warrants the Product against defects in workmanship and materials during the

Coverage Period.

3. Coverage

BRG Precision Products, Inc. will, at its option, repair or replace the defective Product free of charge, provided that

you notify BRG Precision Products, Inc. of the Product defect within the Coverage Period, and provided that BRG

Precision Products, Inc. through inspection establishes the existence of such a defect and that it is covered by this

Agreement. BRG Precision Products, Inc. will, at its option, use new and/or reconditioned parts in performing

warranty repair and building replacement products. BRG Precision Products, Inc. reserves the right to use parts or

products of original or improved design in the repair or replacement. If BRG Precision Products, Inc. repairs or

replaces a Product, the warranty continues for the remaining portion of the Coverage Period without extension. All

replaced Products and all parts removed from repaired Products become the property of BRG Precision Products,

Inc. BRG Precision Products, Inc. covers both parts and labor necessary to repair the Product, and return shipment to

the Customer via a BRG Precision Products, Inc.-selected non-expedited surface freight within the contiguous

United States and Canada. Alaska and Hawaii return shipments to the Customer are via non-expedited air freight.

4. What Is Not Covered

This Agreement does not cover costs related to the removal, installation, or field troubleshooting of the Product

under the terms of the Agreement if, and not limited to:

a) the Product has been misused, neglected, improperly installed, physically damaged or altered, either internally or

externally, or damaged from improper use or use in an unsuitable environment;

b) the Product has been subjected to fire, splashed water (unless specifically ordered to be water resistant),

submersion into any liquid, generalized corrosion, biological infestations, or high input voltage including lighting

strikes and generators operating outside the limits of their Product specifications;

c) repairs have been done to it other than by BRG Precision Products, Inc. or its authorized service centers, or as

assigned by BRG Precision Products;

d) the Product is used as a component part of a Product expressly warranted by another manufacturer;

e) the Product's original identification (trade-mark, serial number) markings have been defaced, altered, or removed;

f) the Product is located outside of the United States and Canada;

g) the customer has misrepresented the Product information provided to BRG Precision Products, Inc. in order to

receive coverage under the terms of this Agreement. This Agreement does not warrant uninterrupted or error-free

operation of the Product;

h) Product malfunction or damage resulting from electromagnetic or solar radiation;

i) Shipping charges to the factory more than 30 days after first receiving the product;

j) Undesirable operation resulting from changes to public law after the product was purchased, such as changing the

dates for daylight saving time.

k) Normal wear and tear relating to the non-operating functions of the equipment such as discoloration from direct

sunlight, heat, etc.

5. Disclaimer and Limitation of Liability

TO THE EXTENT PERMITTED BY APPLICABLE LAW, OTHER THAN THE EXPRESS WARRANTY SET

FORTH IN THIS AGREEMENT, BRG PRECISION PRODUCTS, INC. MAKES NO ADDITIONAL

WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES, WHETHER IN

FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR

CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ANY

WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN

DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY

AFTER THIS PERIOD. IN NO EVENT WILL BRG PRECISION PRODUCTS, INC. BE LIABLE FOR ANY

SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSSES, COSTS OR EXPENSES

HOWEVER ARISING WHETHER IN CONTRACT OR TORT INCLUDING WITHOUT RESTRICTION ANY

ECONOMIC LOSSES OF ANY KIND, ANY LOSS OR DAMAGE TO PROPERTY, ANY PERSONAL INJURY,

ANY DAMAGE OR INJURY ARISING FROM OR AS A RESULT OF MISUSE OR ABUSE, OR THE

INCORRECT INSTALLATION, INTEGRATION OR OPERATION OF THE PRODUCT. SOME STATES DO

NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO

THE ABOVE LIMITATION MAY NOT APPLY TO YOU. BRG Precision Products, Inc. neither assumes nor

authorizes any other person to assume for it any other liability in connection with the repair or replacement of the

Product.

6. Claim Limits

Claims are limited to repair or replacement, or if in BRG Precision Products, Inc.'s discretion that is not possible to

reimbursement up to the purchase price paid for the Product. In no event will BRG Precision Products, Inc.'s

liability under this Agreement exceed the purchase price paid for the Product.

7. Cancellation

You may cancel this Agreement by providing to BRG Precision Products, Inc. written notice of your wish to cancel.

8. Insurance

This Agreement is not a contract of insurance.

9. Amendment and Waiver

No amendment, supplement, consent or waiver, express or implied, to or of any provision of this Agreement will be

effective unless in writing signed by the parties hereto and then only in the specific instance and for the specific

purpose given.

10. Assignment

The Customer may assign or transfer this Agreement provided BRG Precision Products, Inc. is advised by the

Customer in writing of such assignment and the new system owner's information.

11. Governing Law

This Agreement will be governed by and interpreted exclusively in accordance with the laws of the State of Kansas,

without reference to provisions concerning conflicts of laws. The provisions of the United Nations Convention on

Contracts for the Sale of Goods are hereby excluded.

12. Arbitration

Any controversy or claim arising out of or relating to this Agreement, or the breach of it, shall be settled by

arbitration in accordance with the relevant rules of the American Arbitration Association, and judgment on the

award rendered by the arbitrator may be entered in any court having jurisdiction thereof. The place of arbitration

shall be Wichita, Kansas, United States of America. There shall be one arbitrator.

13. Severability

If any provision of this Agreement is found by any court or arbitrator to be invalid, illegal or unenforceable, the

validity, legality and enforceability of the remaining provisions will not be affected thereby.

14. Entire Agreement

This Agreement constitutes the entire contract between the parties concerning the subject matter of this Agreement

and supersedes all marketing brochures and other expectations, understandings, communications, representations

and agreements, whether verbal or written, between the parties. THIS AGREEMENT GIVES YOU SPECIFIC

LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Once a return authorization number is obtained, ship the products to:

BRG Precision Products

Attn: RA# xxxxxxx (where xxxxxxx is the authorization number provided)

600 N. River

Derby, KS 67037

Optional Extended Warranty:

A two-year extended warranty is available. The extended warranty must me purchased before the end of the

standard warranty. The two-year extended warranty costs 20% of the product purchase price.

Optional Advanced Replacement Service (“Hot Swap”):

For critical applications, BRG Precision Products recommends purchasing a complete backup product. If a backup

product is too expensive or the application is only semi-critical, BRG Precision Products recommends the optional

Replacement Service ("Hot Swap")

This service allows the customer to receive a replacement product right away to replace a defective product that is

covered under warranty. BRG Precision Products will pay for ground shipping to send the replacement product. The

customer is responsible for expedited shipping charges over the cost of ground shipping. The customer is

responsible for shipping charges to return the defective product. The Replacement Service is only available for

shipments to the U.S. and Canada.

When the customer receives the replacement product, the defective product must be returned to the factory within 30

days. The invoice for the replacement product will then be voided; otherwise, the full invoice amount for the

replacement product is due. This service is only available in conjunction with warranty repairs.

This replacement service may be purchased for 10% of the products purchase price at the time of the initial

purchase. The replacement service may also be purchased after the initial product purchase and before the standard

warranty expires for 15% of the product purchase price. The term of this service ends when the warranty expires.

This service may be repurchased for 10% of the product purchase price when a two-year extended warranty is

purchased. The product replacement service is only available on selected models.

30 Day Return Policy:

No returns will be accepted without prior written authorization of BRG. Incorrect merchandise received will receive

prompt re-shipment of correct items. Incorrect merchandise, other than custom items, may be returned, shipped

prepaid, and will be exchanged on an equivalent basis.

Merchandise, other than custom items, that cannot be used may be returned at a 25% restocking charge if items are

shipped prepaid in the original boxes. Carrier is responsible for parts damaged in shipment. The customer should

have driver sign for damaged carton on delivery receipt and make a claim with the freight company. Please insist

that the carrier's representative conduct an inspection, and retain all packing materials for the inspector. Please

report promptly for immediate follow-up on short shipments. No action arising from any sale by BRG may be

brought by a customer more than one year after the date of shipment.

--------------------------------------------------------------------------------

Terms of Payment:

New accounts require prepayment. International orders require prepayment by Telegraphic Transfer (bank wire). For

established customers, payment is due in full within 30 days from invoice date. Other payment methods include

Visa, Mastercard, American Express, Discover, Novus (Domestic Only). Add 4% for ground shipping in the U.S.

and Canada. Domestic shipping is prepaid for U.S. Government orders. Other shipping methods are available. All

past due accounts will be subject to a finance charge of 1.5% per month. BRG may cancel or delay future deliveries

if customer fails to make prompt payment or if customer's financial condition warrant such action in BRG's opinion.

BRG is not responsible for delays. The customer will be contacted and given the choice of receiving a partial

shipment or waiting for the full shipment. The firmware license may be suspended, limiting functionality of the

equipment, if payment is not received within 90 days.

--------------------------------------------------------------------------------

Pricing:

BRG Precision Products reserves the right to change prices without prior notification. Prices do not include taxes

and BRG reserves the right to arrange for insurance on all orders.

--------------------------------------------------------------------------------

The courts of Sedgwick County, Kansas will have exclusive jurisdiction and venue over any disputes arising from

any sale by BRG and customer and Buyer consent to personal jurisdiction of the federal and state courts located in

Sedgwick County, Kansas. If legal action is brought by BRG for the collection of any amount owed or due to any

other dispute, the prevailing party will be entitled to recover its reasonable attorneys' fees and costs incurred. These

items constitute the entire agreement between BRG and customer, regardless of any additional or conflicting terms

on customer's purchase order or other documentation, which are objected to, or any prior discussions or usages of

trade. All sales by BRG are made only on the terms and conditions contained herein.

BRG Control Software License Agreement

IMPORTANT!

CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS. YOUR OPENING OF THE SOFTWARE

PACKET WILL INDICATE YOUR ACCEPTANCE. IF YOU DO NOT AGREE WITH THESE TERMS AND

CONDITIONS, YOU SHOULD PROMPTLY RETURN THE COMPLETE UNOPENED PACKAGE.

THE SOFTWARE, INCLUDING ITS CODE, DOCUMENTATION, APPEARANCE, STRUCTURE AND

ORGANIZATION, IS A PROPRIETARY PRODUCT OF BRG PRECISION PRODUCTS, INC. AND IS PROTECTED

BY COPYRIGHT AND OTHER LAWS. TITLE TO THE SOFTWARE, OR ANY COPY, MODIFICATION OR

MERGED PORTION OF THE SOFTWARE, SHALL AT ALL TIMES REMAIN WITH BRG PRECISION

PRODUCTS, INC.

License Agreement

BRG Precision Products, Inc. grants the purchaser a non-exclusive, nontransferable license to use the BRG Control Program (the

"Software”) on any number of computers owned and or operated by the purchaser. You may install the software onto the hard

disks of computers, or make it accessible to any number of computers owned and/or operated by the purchaser on a network, and

you may make a copy of the software disk(s) for backup purposes. These copies must include the BRG Precision Products, Inc.

The software, including its graphics displays are copyrighted. You may not: rent, distribute or transfer copies of the software or

documentation to others outside your organization; modify, disassemble, decompile, or translate the software or documentation;

make any copies of software modules for use with other programs; or use the software on terminals of a network, on a multi-user

computer system not owned by the purchaser.

This license is effective until terminated. You may terminate it at any time by destroying all copies of the software. It will also

terminate automatically if you fail to comply with any of the terms and conditions of the Agreement. Upon termination of this

license for any reason, you agree to return or destroy all copies of the software.

This Agreement constitutes the entire agreement and understanding between the parties and supersedes any prior agreements,

representations, or understandings, whether oral or written, relating to the Software.

This Agreement shall be governed by the laws of the State of Kansas.

Limited Warranty

BRG Precision Products, Inc. warrants that the original software disk(s) are free from physical defects in material and

workmanship under normal use for a period of sixty days from the date of purchase. If during this warranty period you discover

that the software disk(s) contains a physical defect, return the defective item along with proof of purchase to BRG Precision

Products, Inc. and you will receive a replacement at no charge. This is your sole and exclusive remedy for breach of warranty.

THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND IN LIEU OF ALL OTHERS, ORAL OR WRITTEN,

EXPRESS OR IMPLIED. BRG PRECISION PRODUCTS, INC. MAKES NO WARRANTY OR REPRESENTATION,

EXPRESS, IMPLIED OR STATUTORY WITH RESPECT TO THIS SOFTWARE, ITS QUALITY, PERFORMANCE,

MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, THIS SOFTWARE IS SOLD "AS IS", AND YOU,

THE LICENSEE, ARE ASSUMING THE ENTIRE RISK AS TO ITS QUALITY AND PERFORMANCE.

IN NO EVENT SHALL BRG PRECISION PRODUCTS, INC. BE LIABLE FOR DIRECT OR INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE SOFTWARE OR FROM ANY

ERROR OR DEFECT IN THE SOFTWARE OR ITS DOCUMENTATION, SUCH DAMAGES INCLUDE, BUT ARE NOT

LIMITED TO, LOSS OF PROFIT, LOSS OF SOFTWARE OR DATA, AND DAMAGE TO YOUR MONITOR, IN NO

EVENT SHALL BRG PRECISION PRODUCTS, INC. LIABILITY EXCEED THE PRICE PAID FOR THE SOFTWARE.

The above exclusions may not apply to you. This warranty provides you with specific legal rights. There may be other rights

that you may have which vary from state to state.

BRG Firmware License Agreement

THE FIRMWARE, INCLUDING ITS CODE, DOCUMENTATION, APPEARANCE, STRUCTURE AND

ORGANIZATION, IS A PROPRIETARY PRODUCT OF BRG PRECISION PRODUCTS, INC. AND IS PROTECTED

BY COPYRIGHT AND OTHER LAWS. TITLE TO THE FIRMWARE, OR ANY COPY, MODIFICATION OR

MERGED PORTION OF THE FIRMWARE, SHALL AT ALL TIMES REMAIN WITH BRG PRECISION

PRODUCTS, INC.

License Agreement

BRG Precision Products, Inc. grants the purchaser a non-exclusive, nontransferable license to use the BRG Firmware (the

"Software” program stored in processors and/or memory) on hardware manufactured by BRG Precision Product’s, Inc.

The software is copyrighted. You may not: rent, distribute or transfer copies of the software; modify, disassemble, decompile,

extract from the hardware, or translate the software or documentation; make any copies of software modules for use with other

programs.

This license is effective until terminated. You may terminate it at any time by discontinuing the use of the hardware containing

the software. It will also terminate automatically if you fail to comply with any of the terms and conditions of the Agreement.

Upon termination of this license for any reason, you agree to discontinue the use of the software.

This Agreement constitutes the entire agreement and understanding between the parties and supersedes any prior agreements,

representations, or understandings, whether oral or written, relating to the Software.

This Agreement shall be governed by the laws of the State of Kansas.

Limited Warranty

BRG Precision Products, Inc. warrants that the processors or memory use to store the software is free from physical defects in

material and workmanship under normal use for a period of sixty days from the date of purchase.