4
Safety
Your BrewArt BrewFlo has been designed and manufactured to
the highest safety specifications and all relevant Australian and
New Zealand Standards (AS/NZS 60335.2.24:2010 Inc A1,
AS/NZS 60335.1:2011 Inc A1-2).
To ensure a safe, successful and rewarding experience please read these instructions
fully prior to use, and if you have any queries, do not hesitate to contact BrewArt
support on 1300 240 242 or at info@brewart.com
To prevent injury:
kRead all instructions before use.
kRemove packaging and safely
discard packing material.
kOnly li or transport your
BrewFlo when it is empty. Always
use safe liing techniques.
kKeep your BrewFlo upright in
a cool, dry position away from
direct sunlight and heat.
kWhen not in use, keep machine
turned o at the power point.
kKeep all vents clear.
kDo not disassemble your
BrewFlo for any reason.
kOnly use genuine
BrewArt accessories.
kOnly use your BrewFlo for
dispensing BrewArt Kegs.
kKeep your BrewFlo away
from children and pets.
kDo not store explosive
substances such as aerosol
cans with a flammable
propellant in your BrewFlo.
kIf the power cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons
in order to avoid a hazard.
kThe BrewFlo is intended for
household and domestic use only.
kThe BrewFlo is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack
of experience and knowledge,
unless they are supervised or
given instruction concerning the
use of the BrewFlo by a person
responsible for their safety.
kOnly use a so damp cloth to wipe
down external surfaces. Do not
use solvents or harsh chemicals.
A mild detergent may be used.
kFailure to keep your BrewFlo
upright may result in damage to
its compressor cooling system.
