Breville BFP820 Manual de usuario

the Kitchen Wizz‰Peel & Dice

Instruction Book - BFP820

BREVILLE

RECOMMENDS

SAFETY FIRST

At Breville we are very safety

conscious. We design and

manufacture consumer

products with the safety of you,

our valued customer, foremost

in mind. In addition we ask

that you exercise a degree of

care when using any electrical

appliance and adhere to the

following precautions.

IMPORTANT

SAFEGUARDS

READ ALL INSTRUCTIONS

BEFORE USE AND SAVE

FOR FUTURE REFERENCE

• Remove any packaging

material and promotional

labels before using the food

processor for the first time.

• Do not place the food processor

near the edge of a bench or

table during operation. Ensure

the surface is level, clean and

free of water, ﬂour, etc. Vibration

during operation may cause

the appliance to move.

• Handle the food processor

and attachments with care -

remember the blades and discs

are razor-sharp and should be

kept out of reach of children.

• Care shall be taken when

handling the sharp cutting

blades, emptying the bowl and

during cleaning.

• Always make sure the food

processor is completely

assembled before operating.

The appliance will not operate

unless properly assembled.

• Ensure the OFF button has been

pressed, and the food processor

is switched off at the power

outlet and unplugged before

attaching the Quad blade,

dough blade, disc or

processing lid.

• Always secure the processing

bowl onto the motor base

before attaching the Quad

blade, dough blade or discs.

• Always operate the food

processor with the processing

lid securely in position.

• Do not push food into the feed

chute with your ﬁngers or

other utensils. Always use

the food pusher provided.

• Keep hands, knives and other

utensils away from moving

Quad blade, dough blade

or discs.

• Do not place hands or ﬁngers in

the bowl of the food processor

unless the motor, Quad blade,

dough blade or discs have come

to a complete stop.

• Ensure the OFF button has

been pressed to switch the

motor off and the appliance

is switched off at the power

outlet and unplugged before

removing the lid from the bowl.

• Do not use attachments other

than those provided with the

food processor.

• Do not attempt to operate the

food processor by any method

other than those described in

this booklet.

• Ensure the motor, blades or

discs have completely stopped

before disassembling. Ensure

the OFF button has been

pressed and the appliance is

switched off at the power outlet

and unplugged when not in

use, if left unattended and

before disassembling,

cleaning or storing.

• Care should be taken when

removing the food from the

processing bowl by ensuring

the motor, Quad blade, dough

blade or disc, have completely

stopped before disassembling.

Ensure the OFF button has been

pressed to switch the motor off;

the appliance is switched

off at the power outlet and

unplugged, before removing

the lid from the bowl. The

processing bowl should then

be unlocked from the motor

body and the Quad blade,

dough blade or discs carefully

removed before attempting to

remove the processed food.

• Please do not crush ICE in the

large or small processing bowls.

This will cause damage to the

blades (Quad or mini blade).

We recommend that you use

a blender for ice crushing.

• Some stiff mixtures, such

as dough may cause the

processing blade to rotate

more slowly than normal.

If this happens, do not process

for longer than 30 seconds.

• Do not process hot or boiling

liquids - allow liquids to cool

before placing into the

processing bowl. Hot liquid

can be ejected to cause injury

due to sudden steaming.

• Do not use the food processor

on slippery, unstable or

uneven surfaces such as a sink

drain board.

• To protect against electric

shock do not immerse power

cord, plug or motor base in

water or any other liquid.

• Do not move the food

processor whilst in operation.

• Do not leave the food processor

unattended when in use.

• Do not place any part of the

food processor in the microwave

oven.

• Do not ﬁll bowl above marked

liquid levels or 15 cup dry level

(shredding). Always add drier

or thicker ingredients to the

processing bowl prior to

adding ﬂuids.

• Never remove the lid while

the processor is operating.

Always use the POWER/OFF

button to stop the machine

before removing the lid.

• Keep the appliance clean.

Follow the cleaning instructions

provided in this book.

IMPORTANT

SAFEGUARDS

FOR ALL

ELECTRICAL

APPLIANCES

• Unwind the power cord fully

before use.

• Do not let the power cord

hang over the edge of a table,

counter, touch hot surfaces or

become knotted.

• This appliance shall not be used

by children. Keep the appliance

and its cord out of reach of

children. Appliances can be

used by persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and if they understand

the hazards involved.

• Children should be supervised

to ensure they do not play

with the appliance.

• It is recommended to regularly

inspect the appliance. Do not

use the appliance if power

supply cord, plug or appliance

becomes damaged in any way.

Return the entire appliance

to the nearest authorised

Breville Service Centre for

examination and/or repair.

• Any maintenance other

than cleaning should be

performed at an authorised

Breville Service Centre.

• This appliance is for household

use only. Do not use this

appliance for anything other

than its intended use. Do not

use in moving vehicles or

boats. Do not use outdoors.

Misuse may cause injury.

• Authorised Breville Service

Centres can be found on our

website www.Breville.com.au

Alternatively, you can contact

the Breville Customer Care

Centre by phone on

1300 273 845 or email

AskUs@breville.com.au

WARNING

• To avoid possible malfunction

of the processing bowl’s

auto switch, do not place the

processing lid in the locked

position when the appliance is

not in use.

• The processing blades and

discs are extremely sharp,

handle with care at all times.

Avoid contact with moving

parts during operation. Keep

hands, hair, clothing, spatulas

and other utensils out of

food processor feed chute

to prevent personal injury or

damage to the mixer. Always

use the food pusher to push

the food down the feed chute.

• Cleaning and user maintenance

shall not be made by children

without supervision.

• Always disconnect the

appliance from the supply

if it is left unattended

and before assembling,

disassembling or cleaning.

• When mixing yeast dough,

the operating time of the food

processor should not longer than

30 seconds. Allow the appliance

to cool down before next use.

• In order to avoid a hazard due

to inadvertent resetting of the

thermal cut-out, this appliance

must not be supplied through

an external switching device,

such as a timer, or connected

to a circuit that is regularly

switched on and off by the utility.

• The installation of a residual

current device (safety switch)

is recommended to provide

additional safety protection

when using electrical appliances.

It is advisable that a safety

switch with a rated residual

operating current not exceeding

30mA be installed in the

electrical circuit supplying the

appliance. See your electrician

for professional advice.

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

Components

A. Small food pusher

For improved processing control of

smaller ingredients. It also doubles as

a measuring cup for adding/measuring

ingredients. The food processor will run

continually whether the small pusher is in

or out.

B. Medium pusher

The food processor will run continually

whether the medium pusher is in or out.

C. Large food pusher

For pushing food down the feed chute.

The food processor will not start unless

the large pusher is correctly in place.

D. Extra wide 14cm chute

For larger ingredients.

E. Feed chute safety system

Prevents the motor from operating unless

the bowl and lid are correctly locked in

position, and large feed pusher is inserted.

F. Processing lid

Locks onto the processing bowl.

G. Silicone seal

Reduces the chance of leakage while

processing large volumes of liquid

ingredients.

H. Mini bowl

For better control when processing

small quantities.

I. Processing bowl with handle

15 cup bowl for dry ingredients and

10 cups for diced and liquid (thick, wet

ingredients e.g. soups). The processing

bowl locks onto the motor base.

J. LCD display

Displays the timing function.

K. Count up & count down timer

Used to set desired time required for

processing. Can count up or down,

stopping the processor once the time is

reached in count down mode.

L. POWER|OFF button

M. START|PAUSE button

Pauses the Timer.

N. PULSE button

Press down and hold brieﬂy for

short bursts of power. The motor will

automatically stop after the PULSE button

has been released.

O. Direct drive motor base

2000W induction motor with safety

braking system.

P. Non-skid rubber feet

For added safety and stability.

Q. Dough blade

Blunt blade designed for a softer action of

combining dough ingredients.

R. Mini processing blade

Use this blade for small quantities with

the mini bowl for chopping, mixing and

blending a variety of ingredients.

S. Quad®processing blade

Swift action for chopping, mixing, and

blending a variety of ingredients.

T. Quad®blade safety cover

U. Whisk/emulsifying disc

Use this attachment for whisking of eggs

and cream.

V. Adjustable slicer

Use this disc for slicing ingredients.

Able to slice from 0.3–8.0mm thick.

W. French fries cutter

Use this disc for cutting vegetables to

make french fries.

X. Julienne disc

Use this disc for julienning vegetables.

Y. Reversible shredder

Use one side for small/thin shredding and

the other side for coarse shredding.

Z. Disc spindle

Use with the reversible shredder, julienne,

chip cutting, whisk, potato peeler and

adjustable slicing discs in position.

AA. Peeler disc

Peels potatoes and other round,

ﬁrm produces.

AB. Dicing disc

For dicing 12mm cubes.

AC. Dicing grid

For dicing 12mm cubes.

AD. Dicing Distributor

Only use for Dicing bigger quantities

(more than 5 cups). Distributes diced food

evenly in bowl

AE. Cleaning cap

To clean the 12 mm dicing grid.

Attaches to the large food pusher.

AF. Geared spindle

Use with the dicing kit.

AG. Plastic spatula

For scraping the sides of the bowl helping

to process ingredients evenly.

AH. Cleaning brush

For cleaning the processor bowl, blades,

discs, dicer grid and cleaning cap.

AI. Storage box

For storing all accessories.

AF AG AH

Assembly

BEFORE FIRST USE

• Before using your food processor for the

ﬁrst time, remove any packaging material

and promotional labels. Ensure the POWER

button is OFF and the food processor is

unplugged.

• Be careful when handling the blades and

discs as they are extremely sharp.

• Wash the processing bowl, processing lid

and all attachments in warm soapy water

with a soft cloth. Rinse and dry thoroughly.

All attachments except the geared spindle

and large food pusher may be washed in the

dishwasher.

• When ﬁrst using your food processor, you

may notice an odour coming from the motor.

This is normal and will dissipate with use.

• Always use the food processor on a dry,

level work surface.

ASSEMBLY

Motor Base and Bowl

1. Position the processing bowl onto the motor

base with the handle in line with the ALIGN

HANDLE graphic on the motor base.

2. Turn the bowl clockwise until the handle

locks to the front. The processing bowl

should now be securely locked into position.

The food processor will not operate unless

the bowl is locked into position correctly.

Spindles and Discs

1. Before placing the lid onto the processing

bowl, choose your spindle and position

it over the coupling in the center of the

processing bowl. Then position your chosen

attachment over the spindle. Please note

that the Quad Blade and Dough Blade do

not require a spindle for processing.

2. The disc spindle is required when using

the following discs: adjustable slicer,

reversible shredder, julienne, french fries

cutter and the peeler. Do not use the geared

spindle for those attachments. Failing to use

the disc spindle will damage the parts, and

incorrect use this way may cause the parts

to fuse together.

Julienne disc

French fries cutter

Slicing disc

Shredding disc

Peeler

Disc spindle

3. The geared spindle is required when

using the dicing kit. To dice vegetables

or fruit insert the geared spindle into

the bowl ﬁrst, followed by the dicing

grid, ensuring to align with the 4 tabs

in the bowl, then insert the dicing disc.

Make sure you follow the right order.

If you intend to dice larger quantities

(more than 5 cups) please insert the dicing

distributor after placing your geared spindle

into the bowl. The dicing distributor will

help to distribute diced food evenly across

the bowl. Do not use your dicing kit with the

disc spindle. Always use the geared spindle.

Dicing distributor

Dicing blade

Dicing grid

Geared spindle

WARNING

Do not touch the blades

of the Dicing Grid.

They are extremely sharp.

Tabla de contenidos

Otros manuales de Procesador de alimentos de Breville

Breville

Breville Blend Active Manual de usuario

Breville

Breville All In One BSB530 Manual de usuario

Breville

Breville the Mini Wizz Manual de usuario

Breville

Breville Kitchen Wizz BFP400 Manual de usuario

Breville

Breville the Sous Chef BFP800XL Manual de usuario

Breville

Breville BFP800 Guía de solución de problemas

Breville

Breville BFP800 Manual de usuario

Breville

Breville the Sous Chef 12 Manual de usuario

Breville

Breville Kitchen Wizz Quad BFP650 Manual de usuario

Breville

Breville the Sous Chef BFP800XL Manual de usuario

Breville

Breville BFP800 XL G16 Manual de usuario

Breville

Breville Anthony Worrall Thompson VFP014 Manual de usuario

Breville

Breville VFP009 Manual de usuario

Breville

Breville Kitchen Wizz 8 Manual de usuario

Breville

Breville All In One Manual de usuario

Breville

Breville Sous Chef 12 Plus BFP680 Manual de usuario

Breville

Breville Wizz BFP250 Guía rápida

Breville

Breville BFP50 Guía rápida

Breville

Breville Mini Wizz BFP100 Manual de usuario

Breville

Breville Kinetix Wizz BFP450 Manual de usuario

Breville

Breville BSB530 Manual de usuario

Breville

Breville pro kitchen Manual de usuario

Breville

Breville Paradice 16 Manual de usuario

Breville

Breville Kitchen Wizz 15 Pro BFP800 Manual de usuario

Manuales populares de Procesador de alimentos de otras marcas

INNOLIVING

INNOLIVING INN-727 Manual de usuario

Berkel

Berkel C32 Manual de usuario

Beko

Beko CHP5554W Manual de usuario

KitchenAid

KitchenAid 5KFP0719 Manual de usuario

QUIGG

QUIGG KM 2017Wi.20 Manual de usuario

Lakeland

Lakeland PRESS AND CHOP 31557 Manual de usuario

Bosch

Bosch MMR08 GB Series Manual de usuario

HOFFEN

HOFFEN Chef Express T9532 Manual de usuario

Garland

Garland 852 ZG Manual de usuario

Robot Coupe

Robot Coupe CL50 Gourmet Manual de usuario

SAPIRHOME

SAPIRHOME SP-1111-K Manual de usuario

Moulinex

Moulinex DJ3051 Manual de usuario

Bosch

Bosch MUM5 Manual de usuario

cecotec

cecotec Mambo Touch Manual de usuario

KitchenAid

KitchenAid 9KFC0516 Manual de usuario

Black & Decker

Black & Decker hc 300 Instrucciones de instalación

Gorenje

Gorenje SBR 1000 DV Manual de usuario

Arzum

Arzum AR 1128 Manual de usuario