Bresser BR-D1200BL Manual de usuario
Studio Light · Studiolamp · Studiolicht ·
BR-D1200BL
EN Instruction manual
NL Gebruikershandleiding
DE Bedienungsanleitung
DE
Besuchen Sie unsere Website über den folgenden QR Code oder Weblink um weitere
Informationen zu diesem Produkt oder die verfügbaren Übersetzungen dieser Anleitung zu
finden.
EN
Visit our website via the following QR Code or web link to find further information on this
product or the available translations of these instructions.
FR
Si vous souhaitez obtenir plus d’informations concernant ce produit ou rechercher ce mode
d’emploi en d’autres langues, rendez-vous sur notre site Internet en utilisant le code QR ou le
lien correspondant.
NL
Bezoek onze internetpagina via de volgende QR-code of weblink, voor meer informatie over dit
product of de beschikbare vertalingen van deze gebruiksaanwijzing.
IT
Desidera ricevere informazioni esaustive su questo prodotto in una lingua specifica? Venga
a visitare il nostro sito Web al seguente link (codice QR Code) per conoscere le versioni
disponibili.
ES
¿Desearía recibir unas instrucciones de uso completas sobre este producto en un idioma
determinado? Entonces visite nuestra página web utilizando el siguiente enlace (código QR)
para ver las versiones disponibles.
CA
Voleu una guia detallada d'aquest producte en un idioma específic? Visiteu el nostre lloc web
a través del següent enllaç (codi QR) per accedir a les versions disponibles.
PT
Deseja um manual detalhado deste produto numa determinada língua? Visite a nossa Website
através da seguinte ligação (QR Code) das versões disponíveis.
www.bresser.de/PF004242
www.bresser.de/warranty_terms
GARANTIE · WARRANTY · GARANTÍA · GARANZIA
English................................................................................................................... 4
Nederlands ........................................................................................................... 12
Deutsch ................................................................................................................. 20
4
Contents
1 Validity information ........................................................................................................................................5
2 About this Instruction Manual.......................................................................................................................5
3 Intended use ...................................................................................................................................................5
4 General safety instructions ...........................................................................................................................5
5 Parts overview and scope of delivery ..........................................................................................................8
6 Establishing the power supply (mains operation) ......................................................................................9
7 Power supply via battery (optional)..............................................................................................................9
8 Lighting settings.............................................................................................................................................9
9 Changing the lighting angle ........................................................................................................................10
10 Connection with an lighting console (DMX-RJ11) (optional) ...................................................................10
11 Remote control (optional)............................................................................................................................10
12 Setting a channel for remote control..........................................................................................................10
13 Technical data...............................................................................................................................................11
14 Disposal.........................................................................................................................................................11
15 EC Declaration of Conformity .....................................................................................................................11
5 / 28
1 Validity information
This documentation is valid for the products with the article numbers listed below:
F004242
Manual version: v0519
Manual description:
Manual_F004242_BR-D1200BL_en-nl-de_BRESSER_v052019a
With any service inquiries, please state these information.
2 About this Instruction Manual
NOTICE
These operating instructions are to be considered a component of the device.
Please read the safety instructions and the operating instructions carefully before use.
Keep these instructions for renewed use at a later date. When the device is sold or given to someone
else, the instruction manual must be provided to the new owner/user of the product.
3 Intended use
• This device is not intended to be used by persons (including children) with limited physical, sens-
ory or mental capabilities or those who lack the relevant experience and/or knowledge, unless they
are supervised by a person responsible for their safety or have received instructions from this per-
son as to how the device is used.
• This device is for private use only.
• The device is for indoor use only.
4 General safety instructions
DANGER
Risk of electric shock
This device has electronic parts operated via a power source (power supply and/or batteries). Im-
proper use of this product can cause an electric shock. An electric shock can cause serious or poten-
tially fatal injuries. The following safety information must be observed at all times.
• Disconnect the device from the power supply by pulling the power plug when it is not used or in
case of longer interruption of operation and before starting any work on maintenance and cleaning.
• Position your device so that it can be disconnected from the power supply at any time. The power
socket should be installed near the device and should be easily accessible as the mains cable
plug is used to disconnect the device from the power supply.
• To disconnect the device from the power supply, always pull on the plug. Never pull on the cable.
• Before starting up the device, check the device, the cables and the connections for signs of dam-
age.
• Never use a damaged device or a device with damaged live parts. Damaged parts must be imme-
diately replaced by an authorised service company.
• Discharge the device before maintenance work and cleaning.
• Only use the device in complete dry environment and do not touch it with wet or moist parts of
your body.
6 / 28
• Never use the device with defective or damaged components (e.g. housing, cable, lamp, etc.).
DANGER
Risk of suffocation
Improper use of this product can result in suffocation. This is particularly dangerous for children. The
following safety information must be observed at all times.
• Keep packaging materials (plastic bags, rubber bands etc.) away from children. They can cause
suffocation.
WARNING
Danger of glare!
Make sure people and animals do not stare into the light. Due to the high power of illumintaion, your
eyes can be glared or after-images may achieve. This visual impairment can cause accidents.
CAUTION
Risk of burns!
Never touch parts of the device during operation or until it has sufficiently cooled down (about 45 min.
after switching off)!
CAUTION
Danger of injury!
This device contains components and/or accessories that can cause minor to severe injuries in case
of any improper use. Therefore please read the safety instructions below to avoid any bodily injury.
• Always handle flash tubes and lamps with special care. Pieces of glass may cause serious or fatal
injury to eyes and skin!
• Tools with sharp edges and points are often used when working with this device. Because there is
a risk of injury from such tools, store this device and all tools and accessories in a location that is
out of the reach of children.
DANGER
Risk of explosion
Improper use of this product can cause an explosion. The following safety information must be ob-
served at all times to prevent an explosion.
• Do not expose the device to high temperatures. Use only the power supply provided. Never short-
circuit the device or throw it into a fire. Excessive heat and improper handling of this product can
result in short-circuits, fires or even explosions.
CAUTION
Fire hazard!
In case of any improper use of this device, there is a risk of fire. Therefore please read the safety in-
structions below to avoid the initiation of burning.
7 / 28
• Due to extreme heat development of some components of up to 250° C there is an acute FIRE
HAZARD! Always set up the device securely, so that it may not turn over. Ensure for a safe stor-
age.
• Keep children and animals away from the device! They could overturn the device.
• Make sure that no one can trip over the connection cables of the device. The device could be
overturned.
• Never turn on the device with its protection cap fitted.
• Never cover the ventilation slots or cooling fins of the device while using it or as long as it has not
sufficiently cooled down!
• Keep flammable materials away from the device!
• Operate this device only installed with open softboxes to prevent fire hazard due to heat build!
NOTICE
Risk of damage to property
Improper handling can result in damage to the device and/or to the accessories. Always observe the
following safety information when using the device.
• Never disassemble the device. In the event of a fault, please contact your specialist retailer. The
specialist retailer will contact the service centre and send the device for repair if necessary.
• Perform all cleaning and maintenance work at the device only as described in the instruction
manual.
• Do not expose this device to higher temperatures and protect it from water and high humidity.
• Protect the device from severe shocks!
• For this device only use accessories and spare parts that comply with the technical information.
• Never touch flash tubes or lamps with bare hands! Use clean cotton gloves or a clean cloth when
inserting or suspending them.
8 / 28
5 Parts overview and scope of delivery
7
1
3
6
5
2
12
13
14
15
18
17
10 19
20
9
2
A
B
C
D
21
8
5
4
11 11
22
16
Illustration1: All parts of the LED light (A) and included control/power box (B)
1 LED light source 2 Adapter ring (compatible with Bowens ba-
jonet)
3 U-mount 4 Locking knob (Spigot tripod connection)
5 Spigot tripod connection 6 Locking knob (U-mount)
7 Handle 8 4-pins socket (connection to the control/
power box)
9 Fan 10 5-pins socket (connection to the LED light)
11 Voltage selection switch 12 LED display
13 CHANNEL button (setting mode for the re-
mote control)
14 ON/OFF button (switch device on/off)
15 Adjusting knob (increasing or decreasing
setting value)
16 D/C button (setting mode for light intensity
or colour temperature)
17 DMX button (switch on/off DMX control) 18 DMX connection socket (RJ11)
9 / 28
19 C13 mains socket 20 Battery socket (adding suitable batteries*
for mobile use) (optional)
21 C13 power cable with Euro-plug 22 Data cable (connection between light and
control/power box)
6 Establishing the power supply (mains operation)
WARNING!The device can not be operated at the same time by mains power adapter and by
battery! To avoid voltage damage, always operate with only one of the two possible voltage
sources!
1. Put the C13 coupling of the power cable into the C13 socket..
2. Put 5-pins plug of the data cable into the 5-pins socket at the control/power box.
3. Put the 4-pins plug of the data cable into the 4-pins socket at the LED light.
4. Put the Euro-plug of the power cable into the wall socket (230V maximum voltage).
CAUTION!When switching on the device, make sure that the ON/OFF toggle switch is moved to
the correct position for the desired voltage source (mains adapter or battery)!
5. Move voltage toggle switch to position 'ADAPTER' to operate the device by mains power and to
turn on the device.
6. Press ON/OFF button for approx. 2 seconds to turn on the light.
7. Press ON/OFF button again for approx. 2 seconds to turn off the light.
NOTICE!If the device is not used for a long time, disconnect the device from the power supply
(pull out mains plug or remove battery).
7 Power supply via battery (optional)
WARNING!The device can not be operated at the same time by mains power adapter and by
battery! To avoid voltage damage, always operate with only one of the two possible voltage
sources!
As an alternative to the power supply through mains voltage, the device can also be powered by a bat-
tery*.
NOTICE!Only use the type of battery described in this manual. Use of an unsuitable or unau-
thorized battery will damage the device and void the warranty.
1. Charge the rechargeable battery* completely.
2. Insert the battery into the battery socket at the backside of the housing.
CAUTION!Before switching on the device, make sure that only one voltage source is used
(power adapter or battery)!
3. Move voltage toggle switch to position 'BATTERY' to operate the device by battery.
4. Press ON/OFF button for approx. 2 seconds to turn on the light.
5. Press ON/OFF button again for approx. 2 seconds to turn off the light.
*not included
8 Lighting settings
1. Press D/C button several times to set the desired mode.
2. Depending on the selected mode, values for the following functions will be displayed:
• Light intensity from 10 (10%) to 99 (99%) settable stepless
• Colour temperature from 32 (3,200K) to 56 (5,600K) settable stepless
10 / 28
3. Rotate the adjustment knob to the right (+) to increase the respective value. Rotate the adjustment
knob to the left (-) to decrease the respective value.
9 Changing the lighting angle
1. Carefully loosen the locking knobs on both sides of the U-mount.
2. Move the light to the desired angle.
3. Hand-tighten the locking knobs again.
DANGER!Allow the housing surface to cool down before touching it! Touching hot components
can cause serious burns.
WARNING!Hold the light when the locking knobs have been loosened to avoid damage to the
panel!
10 Connection with an lighting console (DMX-RJ11)
(optional)
One or more LED lights can be controlled centrally when connecting them with a RJ11 compatible
lighting console* through suitable connection cables*.
1. Insert the RJ11 modular plug of the connection cable* into the corresponding socket on the lighting
console* and into the socket of the LED light.
2. Press the control selection knob to enable control via DMX lighting console. The DMX function
lamp lights up.
NOTICE!In DMX control mode, the LED light can be controlled only through the console.
3. For the manual control or remote control*, press the control selection knob again. The 2.4G func-
tion light will light up.
*not included
11 Remote control (optional)
The device can be controlled with a suitable 2.4GHz remote control* over the built-in receiver. When
using the same channel, different devices can be operated at the same time through the rermote con-
trol*.
To control the device through a remote control, proceed as follows:
1. Turn on the device(s).
2. Set the desired receiving channel to all lights being controlled.
3. Set the channel also for the remote control.
NOTICE!Only use the remote control recommended for this type of light! If a light is not to be
controlled synchronously, simply change the channel on the corresponding light.
*not included
12 Setting a channel for remote control
1. Press CHANNEL button to enable the channel setting. Two digits flash on the display (currently
set channel).
2. Rotate the adjustment knob to the right (+) to increase the value. Rotate the adjustment knob to
the left (-) to decrease the value.
3. Once the number on the display does not flash anymore the new channel value has been saved.
Tabla de contenidos
Idiomas:
Otros manuales de Equipo de iluminación de Bresser
Bresser
Bresser SG Series Manual de usuario
Bresser
Bresser ST STUDIOLIGHT Manual de usuario
Bresser
Bresser BR-12B Manual de usuario
Bresser
Bresser PT PRO Series Manual de usuario
Bresser
Bresser BR Series Manual de usuario
Bresser
Bresser BR-F36B Manual de usuario
Bresser
Bresser BR-2250 Manual de usuario
Bresser
Bresser BR-80SL Manual de usuario
Bresser
Bresser BR-S150B PRO Manual de usuario
Bresser
Bresser MM-12 Manual de usuario
Bresser
Bresser F000589 Manual de usuario
Bresser
Bresser BR-SP60 Manual de usuario
Bresser
Bresser F000443 Manual de usuario
Bresser
Bresser BR-7RGB MINI TUBE Manual de usuario
Bresser
Bresser BR-S100B PRO Manual de usuario
Bresser
Bresser BR-S60 RGB Manual de usuario
Bresser
Bresser F004396 Manual de usuario
Bresser
Bresser BR-24B Manual de usuario
Bresser
Bresser BR-S COB LED Manual de usuario
Bresser
Bresser BR-64B Manual de usuario
Manuales populares de Equipo de iluminación de otras marcas
Qazqa
Qazqa Suplux SL 3 Black 103062 Manual de usuario
Commercial Electric
Commercial Electric 54568141 Manual de usuario
CREE LIGHTING
CREE LIGHTING 304 Series Manual de usuario
Goobay
Goobay 49867 Manual de usuario
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manual de usuario
Alkalite
Alkalite Krypton KT-81 Manual de usuario
