TROUBLE SHOOTING
Problem?
HEAT should be ON but the heater is not working.
Check that gas is on to heater
Check that power is on to the heater
Problem?
Heater has gone through a start-up sequence and has not lit.
Turn the Thermostat OFF-ON-OFF-ON with a 5 second
interval between steps.
Set the thermostat temperature to above room temperature.
The heater should now operate.
Problem?
Heater is not operating effectively.
Check that there are enough outlets opened for the fan speed
selected. Is the return air filter blocked ?
We recommend cleaning every fortnight.
Problem?
Not enough Heating.
Is the thermostat located in the correct area according
to the Installation Instructions.
Increase the SET temperature.
Problem?
Heater runs when not programmed - Electronic thermostats.
Check the time AM or PM.
Sleep or away programmed temperature is too high: lower.
3
MAINTENANCE SCHEDULE
Periodic maintenance of the heater will ensure a long and satisfactory
service life with the heater operating at optimum performance.
Maintenance should be performed on a yearly basis by an Authorised
person trained in the service of the Braemar Heaters.
If heater does not operate satisfactorily refer to the trouble shooting
chart below or contact your Braemar Dealer.
If you have difficulty operating your Heater check
the trouble shooting guide before calling for service