BPS C-100 Manual de usuario
C-100 USER’S GUIDE
Your PAP device doesn’t have to
keep you from enjoying the great outdoors...
perfect for tent campers & use in RVs.
The freedom to power your
PAP device no matter
where your world takes you!
Table of Contents
INTRODUCTION
Product Specifications 1
Package Contents 2
Intended Use 3
Compatibility 3
Warranty 3
IMPORTANT NOTES
Run Times 4
ResMed Device Warning 4
Humidifier Usage 5
Power Backup Usage 5
ACCESSORIES
Power Inverter 6-7
24V Power Converter 8
GETTING STARTED
Control Board Identification 9
The Power Meter 9
Turning the Battery Pack On/Off 10
Initial Battery Usage 10
Using the Battery Pack Inside the Carrying Case 10
CHARGING THE BATTERY PACK
Charging with AC Power 11
Charging in a Foreign Country 11
Charing in a Vehicle 12
Dual Battery Configuration Charging 13
Table of Contents
POWERING YOUR PAP DEVICE
Introduction 13
Connector Tips 14
Respironics Devices 15
ResMed Devices 16
S9 Series Devices 16
S8 Series & Older Devices 17
Fisher & Paykel Devices 18
DeVilbiss Devices 19
POWERING OTHER DEVICES 20
BATTERY PACK CARE INSTRUCTIONS
Understanding Lithium-Ion Batteries 21
Battery Pack Storage 21
SAFETY WARNINGS 22
DISPOSAL OF LITHIUM-ION BATTERIES 22
1
Introduction
PRODUCT SPECIFICATIONS
DIMENSIONS
Size: 7.5” x 4.25” x 0.75” (L x W x H)
Weight: 1.6 lbs
ELECTRICAL
Cell Type: Rechargeable lithium-ion
Battery Capacity: 100 Wh
Output Voltage Range: 9 - 12.6 V
Output Current Range: 0 - 4.5 A (8A maximum)
Power Gauge: Four stage LED display
RECHARGE TIME
4-5 hours (per Battery Pack when fully discharged)
BATTERY LIFE SPAN
Under normal conditions the life span of the Battery Pack is generally
around 400-500 charge/discharge cycles.
The amount of charge the Battery Pack will hold will gradually decrease
due to usage and aging. This gradual decrease in charge capacity is true
for all rechargeable lithium-ion batteries.
Factors that can influence battery life span include:
how it is used
how often it is used
how well it is taken care of
how it is stored
See page 21 for Battery Pack Care Instructions.
2
Introduction
PACKAGE CONTENTS
Your Battery Pack comes with the items listed below. If you are missing
any of these items, please contact the company from whom you purchased
your Battery Pack.
DC POWER PIGTAIL CORD DC INPUT CORD
AC POWER SUPPLY &
POWER CORD
BATTERY PACK(S)CARRYING CASE CONNECTOR TIPS
Battery Pack is sold in a single or dual
battery configuration package.
ACCESSORIES (SOLD SEPARATELY)
24V POWER CONVERTER
For use with ResMed S9 devices only.
150W MODIFIED
SINE WAVE INVERTER
Seven (7) unique connector tips.
INTENDED USE
Battery Packs are intended to provide external power to PAP (positive
airway pressure) devices; however, when used in conjunction with a power
inverter, they may also be used to power other small electronic devices
such as smartphones, iPods, laptops and iPads. See page 20 for additional
information regarding powering other devices.
Please note that use of the Battery Pack with a device that requires higher
wattage requirements may cause the Battery Pack’s internal circuitry to
shut off to protect from overrun.
COMPATIBILITY
Battery Packs are compatible with most makes and models of PAP
devices; however, some devices will require the additional use of a power
converter or power inverter in conjunction with the Battery Pack.
See pages 15-19 for information regarding your specific PAP device.
The DC Power Pigtail Cord or Connector Tips included with the Battery
Pack may not be compatible with your PAP device as some manufacturers
require the use of a specific DC cable with built-in fuses or special
connection types. When in doubt, please contact the manufacturer of your
device. Below is the contact information for the most common PAP device
manufacturers:
Respironics 1-800-345-6443 www.respironics.com
ResMed 1-800-424-0737 www.resmed.com
Fisher & Paykel 1-800-707-5454 www.fphcare.com
DeVilbiss 1-800-338-1988 www.devilbisshealthcare.com
WARRANTY
Battery Pack, components and accessories are under warranty for
manufacturing and quality defects for six (6) months.
3
Introduction
4
Important Notes
RUN TIMES
Multiple factors will affect Battery Pack actual run times including, but
not limited to, device type, whether a power inverter or power converter
is used, pressure setting, and altitude. The use of heated humidification
or heated tubing will significantly reduce expected run times.
Average run times are based on Respironics System One and ResMed S-9
Series PAP devices with no heated humidification or heated tubing.
SINGLE BATTERY CONFIGURATION
Respironics & other 12V devices: 1-3 nights
*ResMed & other 24V devices: 1-2 nights
DUAL BATTERY CONFIGURATION
Respironics & other 12V devices: 3-5 nights
*ResMed & other 24V devices: 2-3 nights
*Use of a power converter or power inverter required.
RESMED DEVICE WARNING
If you are using any device manufactured by ResMed you must use either
a power converter or power inverter to complete the connection between
the device and the Battery Pack.
A power converter or power inverter must be used because ResMed
devices operate from a 24V direct current and the plugs may run opposite
polarity from other manufacturer devices.
Do not connect the Battery Pack directly to any ResMed model device
as doing so will damage the device.
See pages 16-17 for additional instructions regarding ResMed devices.
5
HUMIDIFIER USAGE
The use of heated humidification or heated tubing will significantly
reduce the expected run time of the Battery Pack due to the amount of
power required for the humidifier heating plate.
To obtain optimal Battery Pack performance we recommend you forgo the
use of heated humidification. Using cool or “passover” humidification will
not reduce expected run times.
Please note that some manufacturers do not recommend the use of
humidification when an external battery is used to power their device or
they may recommend the use of a modified or pure sine wave power
inverter in conjunction with the battery. Please check the manual for your
specific PAP device for disclaimers regarding humidification usage.
POWER BACKUP USAGE
Standard smart chargers keep the Battery Pack topped off and ready to go
as an emergency power backup during power outages.
If you know that a power outage is eminent or probable, you may connect
your device to the Battery Pack and plug the Battery Pack into a wall
outlet. In the event you lose power the Battery Pack will automatically
begin powering your device.
Do not consistently use the Battery Pack as a power backup option as
this will reduce its overall life. Only use the Battery Pack in this
manner when you know that a power outage is eminent.
Important Notes
6
Accessories
POWER INVERTER
Sine wave power inverters are used to change direct current (DC) to
alternating current (AC). Power inverters are universal and can be used
with any device. Using a modified or pure sine wave power inverter in
conjunction with the Battery Pack allows you to:
Power Devices Without DC Capability
To power a PAP device or other small electronic device that does not
have DC capability, you must use a power inverter to complete the
connection between the device and the Battery Pack.
Charge the Battery Pack in a Vehicle
The use of a power inverter in conjunction with the Battery Pack
AC Power Supply allows you to safely and efficiently recharge your
Battery Pack via the cigarette lighter (power) socket of a vehicle.
See page 12 for additional information.
Power Other Small Electronic Devices
To power a small electronic device that does not have a DC cable
with a cigarette lighter plug, use a power inverter to complete the
connection between the device and the Battery Pack.
See page 20 for additional information.
Battery Power Solutions offers an incredibly small, yet powerful 150 Watt
Modified Sine Wave Power Inverter. Sine wave inverters may also be
purchased from electronics retailers.
BATTERY POWER SOLUTIONS
MODIFIED SINE WAVE POWER INVERTER
(sold separately)
Output Rated Power:
120W (continuous) - 150W (maximum)
Dimensions: 5.25" x 2.75" x .5" (LxWxH)
Weight: 0.5 lbs
Otros manuales para C-100
2
Tabla de contenidos
Otros manuales de Paquete de baterías de BPS
Manuales populares de Paquete de baterías de otras marcas
IOGear
IOGear GBP24V Series Manual de usuario
Inventus Power
Inventus Power PROTRXion S-12V100-TRX-HD Manual de usuario
Clas Ohlson
Clas Ohlson PW-290A Manual de usuario
EINHELL
EINHELL MULTI-Ah Power X-Change Plus Manual de usuario
Samsung
Samsung EB-U3300 Manual de usuario
ECTIVE
ECTIVE LC Series Manual de usuario