Product Overview
Attach the Antenna
1
Connect the Antenna to the antenna connector located on
the side of the device.
Connect Ethernet
2
Connect the Ethernet cable to an Ethernet port on a host
computer or network router/switch.
Connect Power Supply
3
(ABDN-ER-DP551) Connect the power supply to an AC
power outlet. Plug the barrel connector from the AC power
supply into the ABDN-ER-DP551’s power port.
(ABDN-ER-DP551U) Plug the Dual (Y) USB cable’s two USB
connectors into two USB ports. Plug the Dual (Y) USB cable’s
barrel connector into the ABDN-ER-DP551U’s power port.
Connect To The Device
4
Run the Airborne Management Center (AMC) application.
If you don’t currently have AMC installed, you can install
it from the included CD or download and install it from
the B+B SmartWorx website. Just search for the model
number and follow the links to download software from the
Downloads section of the product page.
Note: You may be required to wait up to 180 seconds before
the device is discovered and displayed.
When AMC starts, it will request a login:
Select Group Name: “manuf” and enter Group Password:
“dpac”
AMC will load and discover the attached device:
Manage The Device
5
AMC will ask if you want to manage the new device,
select ‘Yes’:
Select ‘Yes’ to indicate device is using Factory Default
settings:
AMC will display the found Airborne device(s):
Right click the device’s name. Under “Connectivity Tools”
choose “launch Web browser for OEM-Cfg1.” This will
open the device’s browser-based management window.
Login to web interface:
Username “dpac”
Password: “dpac”
Continue conguration via the Web interface. Start with
the Conguration -> Express Setup page.
(Continued)
Congure Your Device
6
Note: Use the Help features of the interface to help you
congure the device. When you are done conguring the
device, press ‘Commit’ to save the changes, then ‘Restart’ to
restart the device. You can optionally press ‘Reload’ if you have
further conguration changes to make.
Tip: To easily convert a Direct Ethernet device to a bridge, use
the Bridge Templates in AMC. For additional information, search
the B&B Knowledge base for “bridge templates”.
LAN
Cable
Power
Port
Antenna
LEDs
