BOXLIGHT XD-17k Manual de usuario
FCC Notice
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference
in a residential installation.
Trademarks
Trademarks are the rights of their respective owners.
1
English
Usage Notice
Precautions .......................................................................................... 2
Introduction
Product Features.................................................................................. 3
Package Overview ............................................................................... 4
Product Overview ................................................................................. 5
Installation
Connecting the Projection Display........................................................ 8
Powering On/Off the Projection Display................................................ 9
Adjusting the Projected Image.............................................................. 11
User Controls
Panel Control & Remote Control .......................................................... 13
On-Screen Display Menus ................................................................... 15
Appendices
Troubleshooting .................................................................................... 22
Changing the Lamp............................................................................... 25
Specifications ....................................................................................... 26
Compatibility Modes............................................................................. 27
Table of Contents
2
English
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user’s manual to maximize the life of your unit.
Do:
qTurn off the product before cleaning.
qUse a soft cloth moistened with mild detergent to clean the display housing.
qDisconnect the power plug from AC outlet if the product is not being used for a
long period of time.
Don’t:
qBlock the slots and openings on the unit provided for ventilation.
qUse abrasive cleaners, waxes or solvents for your cleaning.
qUse under the following conditions:
- Extremely hot, cold or humid environment.
- In areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- Place in direct sunlight.
Usage Notice
Warning- Do not look into the lens. The bright light may hurt your eyes.
Warning- To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
Warning- Please do not open or disassemble the product as this may cause
electric shock.
Warning- When changing the lamp, please allow unit to cool down, and follow
all changing instructions.
Warning- This product will detect the life of the lamp itself. Please be sure to
change the lamp when it shows warning messages.
Warning- After changing a new lamp, please reset the lamp life from OSD
menu.
Warning- Before switching off the product, please keep the cooling fan
running for a few minutes.
Warning- Connecting the projector to computer, please turn on the projector
first.
Warning- To reduce the risk of injury to the eyes, do not look directly into the
laser light on the remote control and do not point the laser light into
anyone’s eyes. This remote control is equipped with a Class II laser
that emits radiation.
3
English
Product Features
This product, is an XGA single chip 0.7” DLPäProjector. The outstanding
features of it are listed as follows:
qTrue XGA, 1024 x 768 addressable pixels
q3.3 lbs (1.5 kgs) lightweight compact design
qSingle chip DLPätechnology
qSXGAcompression and VGA, SVGA re-sizing
q130 Watts user replaceable P-VIP lamp
qMac/NEC PC-98/FM Towns compatible
qNTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and HDTV (1080i,720P,480i/P)
compatible
qFull function remote with mouse control and laser pointer
qHigh-techDVI Connection for digital and analog video connectivity
qHigh definition TV compatibility
qUser friendly Multilingual on-screen display menu
qAdvanced electronic keystone correction
qUser friendly keypad control with backlight
qLuxurious carrying case included
Introduction
4
English
Package Overview
This projection display comes with all the items shown below. Check to make
sure your unit is complete. Contact your dealer immediately if anything is
missing.
Projection Display Power Cord
S-Video Cable RCA Audio Cable
D-Sub RGB to DVI Cable
Remote Control with Mouse
Function & Laser Pointer
Carrying Case
Warranty Card
Composite Video Cable
DVI Signal Cable for
HDTV/Component
Quick Start Card
Remote Mouse Y Cable
Battery x 2 User’s Guide
5
English
Product Overview
Speaker
Focus Ring
Remote Control
Receiver
Zoom Ring
Zoom Lens Power Connector
Elevator Button
ConnectionPorts
HDTV/ComponentVideo
& Computer Input
Connector
S-videoInput
Connector
Audio Input
Connector
Composite Video
InputConnector
Remote Mouse
InputConnector
MonitorLoop-
throughConnector
PanelControl
Power On / StandbyMenu
(On/Off)
Enter /
Resync
Source
FourDirectional
Select Keys
MuteVolume Lamp
Warning LED
MainUnit
Panel Control
Temperature
Warning LED
6
English
Remote Control with Mouse Function & Laser Pointer
Source
Resync
Freeze
Keystone Correction
Power / Standby
Volume ( + / - )
Mute
FourDirectional Select Keys
Menu
Laser Pointer
Zoom In / Zoom Out
PageUp
PageDown
LED Point
Caution: To reduce the risk of injury to the eyes, do not look directly
into the laser light on the remote control and do not point the laser light into
anyone’s eyes.This remote control is equipped with a Class II laser that
emits radiation.
7
English
Enter Key
Laser Pointer Caution
8
English
Connecting the ProjectionDisplay
Installation
vDVI signal cable for DVI is the optional accessory.
vTo ensure the projection display works well with your computer, please configure
the display mode of your graphic card to make it less than or equal to 1024 X 768
resolution. Make sure timimg of the display mode is compatible with the projection
display. Refer to the“Compatibility Modes”section on page 27.
Power Cord
S-Video Output
Monitor Cable
S-Video Cable
Video Output
Audio Output
Remote Mouse Y Cable
D-Sub RGB to DVI Cable
D-Sub RGB to
DVI Cable
RGB Port
Digital Port
RGBPort
DigitalPort
DVI Signal Cable for
HDTV/Component
Composite Video Cable
RCA Audio Cable
RS232
USB
*DVI Signal Cable for DVI
*DVI Signal Cable for DVI
9
English
uu
uu
uPowering On the Projection Display
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely connected.
3. The “Power/Standby” indicator will flash.And press the “Power/Standby” button
again to start on your projector.
The startup screen will display for 20 seconds and the Power/Standby indicator will
light solid amber.
4. Turn on your source (computer, notebook, or video player ,etc.). The projector will
detect your source automatically.
* If the screen displays “No Signal” , please make sure the signal cables are
securely connected.
* If you connect multiple sources at the same time, use the “Source” button
on the Remote Control or Panel Control to switch.
* Turn on the projector display first and then the computer.
Power On/Off the Projection Display
Lens cap
Power /
Standby
Tabla de contenidos
Otros manuales de Proyector de BOXLIGHT
BOXLIGHT
BOXLIGHT Raven Manual de usuario
BOXLIGHT
BOXLIGHT PhoenixX30 Manual de usuario
BOXLIGHT
BOXLIGHT XP-58z Manual de usuario
BOXLIGHT
BOXLIGHT CD-454m Manual de usuario
BOXLIGHT
BOXLIGHT CP-15t Manual de usuario
BOXLIGHT
BOXLIGHT CP-11t Manual de usuario
BOXLIGHT
BOXLIGHT MP-350m Manual de usuario
BOXLIGHT
BOXLIGHT 6000 Manual de usuario
BOXLIGHT
BOXLIGHT Seattle X22N Manual de usuario
BOXLIGHT
BOXLIGHT MP-25t Manual de usuario
BOXLIGHT
BOXLIGHT XD-16n Manual de usuario
BOXLIGHT
BOXLIGHT Cinema 13HD Manual de usuario
BOXLIGHT
BOXLIGHT PhoenixS25 Manual de usuario
BOXLIGHT
BOXLIGHT SP-50m Manual de usuario
BOXLIGHT
BOXLIGHT Cinema 17SF Manual de usuario
BOXLIGHT
BOXLIGHT ProjectoWrite2-W Manual de usuario
BOXLIGHT
BOXLIGHT SP-48Z Manual de usuario
BOXLIGHT
BOXLIGHT FP-95t Manual de usuario
BOXLIGHT
BOXLIGHT Pro6500DP Manual de usuario
BOXLIGHT
BOXLIGHT SP-5t Manual de usuario
