Page 8/26
FRONT AND REAR MULCHER | User manual December 2020
WORK CLOTHING
When working and especially when executing repair or maintenance activities, it is necessary to wear the following
clothing and safety accessories:
• Overalls or other comfortable clothing, not too loose to prevent the possibility that parts of them might be
caught in the moving parts.
• Protective gloves for hands.
• Protective glasses or faceplate to protect eyes and face.
• Protective helmet for the head.
•Safety shoes
Wear only personal safety accessories in good condition and complying with the rules in force.
3.4 General safety rules
ALWAYS CONSIDER THE FEATURES OF THE AREA WHERE WORK IS TAKING PLACE:
When the equipment is running, it is forbidden to stand within the field of action of the shredder or of the other
accessories of which it is provided with.
PREPARE THE WORK:
• Before and when working, do not drink alcohol, take drugs, or any other substances which may alter your
capability of working with machine tools.
Be sure to have sufficient fuel, to prevent a forced stopping of the machine, maybe during a critical movement.
• Do not use the equipment under unsafe conditions. For instance, it is forbidden to execute makeshift repair
activities just to start working; it is forbidden to work at night with an insufficiently illuminated working area.
• NEVER operate implement without all shields in place and in good operational condition. The operator must
be familiar with the mower and tractor and all associated safety practices before operating the mower and
tractor.
WHEN WORKING OR DURING THE MAINTENANCE ACTIVITIES IT IS NECESSARY TO REMEMBER:
• The labels and stickers providing instructions and pointing out the dangers, must not be removed, hidden, or
made illegible.
• Do not remove, except in case of maintenance, the shields, guards, and deflectors equipped on the mower.
When it is necessary to remove them, stop engine, handle with care and reassemble them properly before
restarting the engine and using the equipment. The mower is equipped with protective deflectors to prevent
objects being thrown from the mower by the blades, however, no shielding is 100% effective. All shields,
guards, and deflectors equipped on the mower must be maintained in good operational condition.
• It is forbidden to lubricate, clean and adjust the moving parts while they are running.
• During maintenance or adjustment activities on the equipment it is forbidden to use hands for executing
operations for which there are specific tools.
• Do not use tools in bad condition or inappropriately, for instance pliers rather than monkey spanners, etc.
