5. Click “Register an XRD” and input the Hardware ID for the XRD.
3 Configure the Botlink Relay software
In order to use your existing ground control station and other software applications with the
Botlink XRD, you’ll need to tell the Botlink Relay software how your software will communicate --
using TCP, UDP, or Serial .
5
Configuring the Botlink Relay Software is simple.
Configuring UDP
1. Open the Botlink XRD Tray App
2. Enter your username and password
3. Click “Login”
4. Select the UDP Connection method
5. Enter a port
a. The “Listen” port will receive data from the Ground Control Software
b. The “Write Port” will transmit data to the Ground Control Software
6. Select a Botlink XRD to connect to
7. Click the start button
Configuring TCP
1. Open the Botlink XRD Tray App
2. Enter your username and password
3. Click “Login”
4. Select the TCP Connection method
5. Enter a port
6. Select a Botlink XRD to connect to
7. Click the start button
Configuring Serial
1. Open the Botlink XRD Tray App
2. Enter your username and password
3. Click “Login”
4. Select the Serial Connection method
5 Serial support only available on Windows
