Bose SoundLink Bluetooth Mobile Speaker II Manual de usuario

Troubleshooting guide

Speaker will not turn on when using battery

Applies to:

SoundLink Color Bluetooth® speaker II

SoundLink Revolve Bluetooth® speaker

SoundLink Revolve+ Bluetooth® speaker

SoundLink Micro Bluetooth® speaker

Connect the speaker with its charging cable to a USB charger or a powered computer USB port.

You may need to do this for the following reasons:

The battery may not be sufficiently charged. The battery must have sufficient charge to power up

the speaker

The speaker has been disconnected from power and unused for 14 days. When this happens, it

goes into battery protection mode. Brand new speakers are typically in this mode when they're

first removed from the box

The speaker is unplugged and unused for more than three days with a remaining charge of less

than 10%. When this happens, it also goes into battery protection mode

If your speaker still does not turn on after connecting it to power, see Speaker will not turn on

when connected to AC power

Speaker will not turn on when connected to

AC power

Applies to:

SoundLink Color Bluetooth® speaker II

If your speaker will not turn on when connected to AC power, try the following:

Make sure your speaker is connected to a working power outlet

Make sure both ends of the charging cable are firmly connected

Try another USB charging cable

Try another USB wall charger or powered computer USB port

If you are using a surge protector or multi-outlet converter, try plugging directly into the socket

Put the product into Ship Mode to reset it (your settings and stored devices will not be erased):

Connect the speaker's power cable

Press and hold the Multi-function button for 10 seconds

While continuing to hold the Multi-function button, unplug the speaker from power

Release the Multi-function button

Reconnect the power cable and test the speaker

Difficulty using Party and Stereo modes

Applies to:

SoundLink Micro Bluetooth® speaker

Please try the following steps if you are having trouble using the Party and Stereo feature:

Use the Connect app to pair speakers

Party and Stereo modes can be enabled either by using the Bose® Connect

app or manual pairing using the speaker buttons. However, the Connect app

pairing method is strongly recommended for two reasons:

The procedure on the Connect app is designed to be user friendly

The Connect app allows any combination of compatible speakers to enter Party or Stereo

modes. (For example, a Revolve and a Revolve+ can be paired together.) The manual method of

using the speaker buttons only allows you to pair two of the same speaker model

Make sure only one speaker is actively connected to the mobile device.

Stereo and Party mode will not work if both speakers are connected to the mobile device

Check software versions

The software needs to be up to date, as do both speakers, when using Party and Stereo modes. If

there is a mismatch of two speakers running on different firmware versions, it can result in

difficulty pairing

Try pausing audio when engaging Party or Stereo modes

Pause audio streaming to all speakers before turning on Party or Stereo mode

Rename the speakers in the Connect app

For ease of use, it is recommended for customers with two of the same

model speaker to rename the speakers in the Connect app so that they do

not share the exact same name

Perform a factory reset.

For information on performing a reset, see Resetting the speaker.

Note: A reset is used to correct occasional product issues. It is not something that a product

should require repeatedly.

Resetting the speaker

Applies to:

SoundLink Micro Bluetooth® speaker

Factory reset clears paired mobile devices and language settings from your speaker and returns it

to the original factory settings.

Turn the speaker on

Press and hold the Power button for 10 seconds, until the Bluetooth® indicator glows Blue, and

you hear a voice prompt to select a language

Bluetooth® device will not connect to the

speaker

Applies to:

SoundLink Micro Bluetooth® speaker

If your Bluetooth device will not connect to the speaker, try the following suggestions to connect

your device:

Make sure Bluetooth is turned ON on your device

Try moving your device closer to the speaker. Bluetooth range is about 9 metres. Range is

reduced when interference is present, like walls or multiple Bluetooth devices in the same area

If two Bluetooth devices are already paired to the speaker, disable Bluetooth on one of the

devices, or take it out of range of the speaker. The speaker remembers the last eight paired

devices but can only pair to two devices at a time

Repeatedly press the speaker's Bluetooth button until you hear the name of the desired device

Go to the Bluetooth settings on your device, select the SoundLink® speaker and choose to

"Forget" or "Remove" the speaker. Next, briefly hold the Bluetooth button on the speaker until

the Bluetooth light begins flashing Blue. Try again to pair the device to the speaker

Reset the device you are trying to pair. This is typically done by rebooting/restarting it or

removing the battery and/or power cable for one minute

Clear the SoundLink® speaker's paired device memory by holding the Bluetooth button until you

hear a tone and, if enabled, a voice prompt. The speaker’s Bluetooth light begins flashing blue.

Try again to connect your device to the speaker

Reset the speaker by turning it on and then holding the power button for 10 seconds until it turns

off

A factory reset clears the speaker's language setting and its paired mobile device memory,

returning the speaker to original factory settings. Once reset, turn the speaker on and try again to

pair the device.

Try pairing another device. If the other device works, there may be an issue with the first device

Pairing with a Bluetooth® device

Applies to:

SoundLink Micro Bluetooth® speaker

To pair a Bluetooth® device:

With your speaker powered on, press and hold the Bluetooth® button until you hear "Ready to

connect" and the Bluetooth® indicator blinks blue

On the device you want to pair, turn on Bluetooth. This is typically found in the device's settings

Select your speaker from the device list

Once paired, you hear "Connected to <mobile device name>", and the Bluetooth indicator glows

solid white

You can store up to eight paired mobile devices in the speaker pairing list.

To pair an additional mobile device:

Press and hold the Bluetooth® button until the Bluetooth® indicator blinks Blue and you hear

"Ready to pair another device"

Pair your device to the speaker using the steps above

You can store up to eight paired mobile devices in the speaker pairing list, and your speaker can

be actively connected to two mobile devices at a time.

However, you can only play audio from one device at a time.

To identify and switch between connected devices:

Press the Bluetooth® button to hear which devices are currently connected

Pause audio on your first device to switch to the second device

Play audio on your second device

To disconnect a device:

Turn off the Bluetooth feature on your device

To reconnect a device:

When powered on, your speaker tries to reconnect with the two most recently connected devices.

The devices must be within range (9 m or 30 ft) and powered on.

Selecting the audio output device on a PC

running Windows® XP

Applies to:

SoundLink Colour Bluetooth® speaker

SoundLink Color Bluetooth® speaker II

SoundLink Revolve Bluetooth® speaker

SoundLink Revolve+ Bluetooth® speaker

SoundLink Micro Bluetooth® speaker

To select the audio output device on a computer running the Windows® XP operating system,

follow these steps:

Click the "Start" button in the lower left-hand corner of the screen

Click the Windows "Control Panel"

Click the "Sounds and Audio Devices" icon

Note: You may need to switch to "Classic View" in the top left-hand corner to see the System

Menu above.

The Sounds and Audio Devices Properties window appears. In the "Audio" tab, under the

"Sound Playback" selection, select the Bluetooth® device from the drop-down menu

If you made any changes, click "Apply," and then click "OK" to close the window

Selecting the audio output device on a PC

running Windows Vista®

Applies to:

SoundLink Colour Bluetooth® speaker

SoundLink Color Bluetooth® speaker II

SoundLink Revolve Bluetooth® speaker

SoundLink Revolve+ Bluetooth® speaker

SoundLink Micro Bluetooth® speaker

To select the audio output device on a computer running the Windows Vista® operating system,

follow these steps:

Click the "Start" button in the lower left-hand corner of the screen

Click "Control Panel"

In the Control Panel, click "Hardware and Sound"

In the Hardware and Sound menu, click "Manage audio devices"

In the "Playback" tab, highlight the Bluetooth® device

Once the Bluetooth® device is selected, click "Set Default"

If you made any changes, click "Apply", and then click "OK" to close the window

Stereo and Party mode

Applies to:

SoundLink Micro Bluetooth® speaker

You can pair your Bose speakers together to play in the following modes using the Bose®

Connect app (recommended) or the speakers' control buttons:

Party mode (left and right speakers in unison)

Stereo mode (left speaker and right speaker separate)

Refer to your Bose owner's guide to determine if your secondary speaker supports these modes.

Using Party and Stereo mode with the Bose® Connect app

Turn both speakers on.

Make sure at least one speaker is paired with your mobile device.

From the Connect app, select the Party mode icon at the bottom of your screen.

Select, "CONTINUE".

Wait for the speakers to connect. Once connected, you will be in Party mode.

Select, "STEREO (L/R)" to switch to Stereo mode.

Select, "STEREO (L/R)" again to switch back to Party mode.

Using Party mode manually

Make sure both speakers are powered on

Make sure a speaker is connected via Bluetooth® to your mobile device

On the speaker connected to your device, press and hold the Bluetooth and Volume +buttons

simultaneously

Release the buttons when you hear "Press the Bluetooth and volume down buttons

simultaneously on a second Bose device"

On the second speaker, press and hold the Bluetooth and Volume –buttons simultaneously

Release the buttons when the speaker emits a tone. After 10 seconds, you will hear "Party mode"

from both speakers simultaneously. Party mode is enabled. You are now able to play audio in

unison using your mobile device

Using Stereo mode manually

On one of the speakers, press the Bluetooth and Volume + buttons simultaneously

Release the buttons when you hear "Stereo mode". You hear "Left" from the left speaker and

"Right" from the right speaker. Stereo mode is enabled. You are now able to play audio in stereo

using your mobile device

Configure your speakers for Party mode. See steps above

To switch between Party and Stereo mode, press the Bluetooth and Volume +buttons

simultaneously.

To disable Party or Stereo mode, do one of the following on either speaker:

Press and hold the Bluetooth button until you hear "Bose speakers unlinked"

Press and hold the Multi-function and Volume +buttons simultaneously until you hear "Bose

speakers unlinked"

Press the Power button to power off the speaker

Selecting the audio output device on a Mac

Applies to:

SoundLink Colour Bluetooth® speaker

SoundLink Color Bluetooth® speaker II

SoundLink Revolve Bluetooth® speaker

Otros manuales para SoundLink Bluetooth Mobile Speaker II

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Oradores de Bose

Bose

Bose VIRTUALLY INVISIBLE 191 SPEAKERS Guía de inicio rápido

Bose

Bose 251 Manual de usuario

Bose

Bose FreeSpace 360 Manual de usuario

Bose

Bose Companion 2 Series II Manual de usuario

Bose

Bose SOUNDLINK REVOLVE Manual de usuario

Bose

Bose 301 Sonata Manual de usuario

Bose

Bose DesignMax DM6SE Manual de usuario

Bose

Bose 4.2 Series II Manual de usuario

Bose

Bose Free Space 51 Manual de usuario

Bose

Bose Acoustic Wave Series II Manual de usuario

Bose

Bose ShowMatch SM5 Manual de instrucciones

Bose

Bose PANARAY MB4 Manual de usuario

Bose

Bose 201 Series Manual de usuario

Bose

Bose FreeSpace DS 40SE Manual de usuario

Bose

Bose FreeSpace DS 100SE Manual de usuario

Bose

Bose MediaMate Computer Speakers Manual de usuario

Bose

Bose TVS Manual de usuario

Bose

Bose SoundLink Bluetooth Mobile Speaker II Manual de usuario

Bose

Bose PANARAY MB4 Manual de usuario

Bose

Bose Companion 3 Series II Manual de usuario

Bose

Bose FreeSpace 360P Manual de usuario

Bose

Bose FreeSpace DS 16F Manual de usuario

Bose

Bose LT 6403 Manual de usuario

Bose

Bose EdgeMax EM90 Manual de usuario

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario

Tannoy

Tannoy SYSTEM 600a Manual de usuario