Bosch Carephone 62 Manual de usuario
Carephone 62
CRS-H62M-GB | F.01U.141.162 | V5 | 2014.09
en User Manual
Carephone 62 Table of Contents | en 3
Bosch Security Systems User Manual F.01U.141.162 | V5 | 2014.09
Table of Contents
1 Safety Instructions 5
2Features 6
3 Scope of Delivery 7
4 Product Description 8
4.1 Unit Description 8
4.2 Emergency call button 8
4.3 Cancel / Action button (S button) 9
4.3.1 Action button: service call 9
4.3.2 Action button: direct call 9
4.3.3 Action button: unit status 9
4.3.4 Action button: manual test call 9
4.4 Daily button 10
4.5 Sign in / sign out button 10
4.6 Take the first incoming call 11
4.7 Device acknowledgments 11
4.7.1 Light signals 11
4.7.2 Local voice announcements from the unit 13
4.7.3 Error messages 14
5 Installation 15
5.1 Installation recommendations 15
5.2 Placing the Carephone 62 15
5.3 Connecting the Carephone 62 16
5.3.1 PSTN or GSM connection 16
5.3.2 IP connection 17
5.3.3 Connection configuration 17
5.4 Deinstallation 17
6 Programming 18
6.1 Programming methods 18
6.2 Programming procedure 19
6.2.1 Opening the unit and access the keyboard 19
4en | Table of Contents Carephone 62
F.01U.141.162 | V5 | 2014.09 User Manual Bosch Security Systems
6.2.2 Entering keyboard programming 19
6.2.3 Key functions during keyboard programming 20
6.2.4 Programming steps 20
6.2.5 Special key functions 31
6.3 Test mode 33
7 Additional Devices 34
7.1 Wireless transmitters 34
7.2 Wireless detectors 34
7.3 Wired peripherals 35
7.4 Microphone and loudspeaker connection 36
7.5 microSD memory card 36
7.5.1 Installing the microSD memory card 37
7.5.2 Programming with the microSD memory card 39
8Operation 41
8.1 Emergency Call to a Monitoring Centre 41
8.2 Emergency Call to a Private Phone 41
8.3 Taking Phone Calls 43
8.4 Test instructions 43
9 Maintenance 44
9.1 Cleaning 44
9.2 Battery disposal 44
9.3 Replacing the backup battery 45
A Appendix 49
A.1 Technical specifications 49
A.2 Conformity 51
A.3 Wall mounting 51
A.4 Drilling template 53
A.5 Programming tables 56
Index 59
Carephone 62 Safety Instructions | en 5
Bosch Security Systems User Manual F.01U.141.162 | V5 | 2014.09
1 Safety Instructions
– Do not install the unit near a heating appliance.
– Do not expose the unit to direct sunlight.
– Do not install in a wet or humid environment.
– Never touch the power adapter with wet hands.
– Do not attempt to open the unit or the power adapter.
– When unplugging the unit from the power outlet, never
pull on the power cord but always grip the power adapter.
– Connect the Carephone 62 only to a professionally
installed 230 V AC/50 Hz power outlet with a 10 A fuse.
– Do not install the Carephone 62 in the proximity of DECT/
GSM telephones, TV sets, large metal objects, microwave
appliances or radio telephones. This will impair the
reception of signals from the wireless transmitter.
– Use only original equipment for cables and power supply.
Any other power adapter could damage the unit.
– Electrolytes or gases may be emitted from the battery
should it leak under exceptional circumstances. If this
happens, deactivate the unit by isolating it from the phone
network and power supply. Battery replacement must be
carried out by trained service personnel only.
Electrostatic Discharge
CAUTION!
Read through the safety instructions carefully before using the
unit for the first time. This is important for connection, use and
safety.
WARNING!
The Carephone 62 contains highly sensitive electronic
components. It should be opened only in an ESD protected
environment with respect to the following precautions.
Discharge yourself from electrostatic loads by touching a
grounded conductive surface before opening the unit.
6en | Features Carephone 62
F.01U.141.162 | V5 | 2014.09 User Manual Bosch Security Systems
2 Features
The Carephone 62 has been designed to ensure maximum
security for persons living in their own homes. It can be used to
send emergency calls to a receiver or a telephone.
The person requiring assistance activates a call by pressing a
button on the Carephone 62 or by using a wireless transmitter.
This action establishes a voice connection between the person
requiring assistance and the call receiver.
The device has two basic operating modes:
1. The Carephone 62 is part of a social alarm system that
consists of a monitoring centre that can be reached at any
time and the Carephone itself. Calls are sent to this
monitoring centre.
2. The unit is operated as a standalone unit, in which case
emergency calls will be sent to private phones.
The Carephone 62 provides connections for an external
microphone and an external loudspeaker, as well as wired input
and output, and a microSD memory card. It can be used with up
to 10 wireless transmitters. A signaling device can also be
connected for individuals with speech/hearing difficulties.
microSD Logo is a trademark of SD-3C, LLC.
CAUTION!
No user serviceable parts inside.
This unit should be tested weekly.
Carephone 62 Scope of Delivery | en 7
Bosch Security Systems User Manual F.01U.141.162 | V5 | 2014.09
3 Scope of Delivery
1. Carephone 62 including a rechargeable backup battery
2. Wireless transmitter (battery included), with necklace, clip
and bracelet accessories
3. Power supply unit
4. Phone or network cable, optionally with a country-specific
telephone plug
5. Quick user guide
6. Quick programming guide
7. User manual
Carephone 62
User Manual
Notruf
Emergency call
Appel d'urgence
Alarm oproep
Funknotruf
Pendant alarm
Alarme médaillon
Handzender alarm
Alarm stoppen
Cancel alarm
Stop
Alarm stoppen
Abmelden
Away
Absence
Afmelden
Tagestaste
Daily button
Présence Vie
Activiteitscontrole
Anmelden
Home
Présence
Aanmelden
Carephone 62
en
de
fr
nl
Kurzprogrammieranleitung
Quick Programming Guide
Verkorte Programmering
Guide de paramétrage rapide
13
4
2
5
67
+
1
4
8
7
A
D
R
0
B
F
C
E
P
2
6
3
9
#
3
*
Carephone 62
CRS-H62-PQG
CAUTION!
To reduce risk of fire and electric shock, replace only with
identical components and parts.
8en | Product Description Carephone 62
F.01U.141.162 | V5 | 2014.09 User Manual Bosch Security Systems
4 Product Description
4.1 Unit Description
1. Red emergency call button
2. Cancel / Action button
3. Sign in / sign out button
4. Daily button
4.2 Emergency call button
If you require help, press the red emergency call button to
initiate a call.
The call will be answered either by a person at the monitoring
centre or a private individual, according to the programmed
telephone number.
Carephone 62 Product Description | en 9
Bosch Security Systems User Manual F.01U.141.162 | V5 | 2014.09
4.3 Cancel / Action button (S button)
Cancel emergency call
If you have pressed the emergency call button by mistake, you
can cancel the call with the Action button during the pre-alarm
time. Press the Action button until the unit announces "stop".
Calls cannot be cancelled after the pre-alarm time.
4.3.1 Action button: service call
You can program the Action button to act as a service button. If
you press the button and hold it for at least 2 seconds, the unit
dials a call number that has been programmed for the service
call and you hear the announcement "service call".
4.3.2 Action button: direct call
You can program the Action button to make a direct call. When
the Action button is pressed, the Carephone 62 makes one
single call to an analog telephone destination. In case of a call
sent by a direct call, the alarm can also be cancelled after the
pre-alarm. A direct call is not possible with an IP connection.
4.3.3 Action button: unit status
The Action button lights up if there is a malfunction. Press the
Action button, the status is announced.
4.3.4 Action button: manual test call
The Action button can be used to send out manual test calls.
Press the button for at least 2 seconds, the Carephone 62 will
send a manual test call. Step 71 must be set to setting 4. See
Section 6.2.4 Programming steps, page 20.
10 en | Product Description Carephone 62
F.01U.141.162 | V5 | 2014.09 User Manual Bosch Security Systems
4.4 Daily button
The Carephone 62 has a built-in activity monitor, which ensures
that an emergency call is made automatically if the daily button
is not pressed within a preset period of time. The lamp on the
daily button lights up when it should be pressed.
The activity monitor can also be reset by a transmitter. The daily
button is also used for presence marking by staff :
– press 2 seconds upon arrival.
– press shortly upon departure.
4.5 Sign in / sign out button
Pressing the sign in / sign out button tells the unit whether you
are currently at home or not.
Sign out
When you leave home, press the sign in / sign out button. You
hear the announcement "sign out ". The activity monitor is
temporarily disabled.
Sign in
When you return home, press the sign in / sign out button
again. You hear the announcement "sign in".
NOTICE!
Calls can be made with the emergency call button or a wireless
transmitter at any time, even after a sign out. This signs you in.
Otros manuales para Carephone 62
1
Tabla de contenidos
Otros manuales de Teléfono de emergencia de Bosch
Manuales populares de Teléfono de emergencia de otras marcas
Paso
Paso PA8506-V Manual de usuario
JNY Safetycare
JNY Safetycare FDC Manual de usuario
Rath
Rath 2100-TL9 Manual de usuario
Eldat
Eldat Easywave Fon Alarm Manual de usuario
Merak
Merak MMk-656 Manual de usuario
Assistive Technology Services
Assistive Technology Services TOUCH N TALK FD Instrucciones de montaje