Boekel Tap Dancer Manual de usuario

Tap Dancer

270100

Operating Instructions

Contents

Page Number

Safety.......................................................................................3

General Information...............................................................4

Operating instructions...........................................................5

Specifications.........................................................................6

Warranty and Service.............................................................7

N2400300, Feb 2007, Rev. 0

Page 2

270100

Operating Instructions

1. Safety

The following symbols mean:-

Caution: Read these operating instructions fully before use and pay particular attention to

sections containing this symbol

Always observe the following safety precautions

Use only as specified by the operating instructions, or the intrinsic protection may be impaired.

After transport or storage in humid conditions, dry out the unit before connecting it to the supply voltage.

During drying out the intrinsic protection may be impaired.

Connect only to a power supply with a voltage corresponding to that on the serial number label.

Ensure that the mains switch and isolating device (power supply connector) are easily accessible during use.

Connect only to a power supply which provides a safety earth (ground) terminal.

Before moving, disconnect at the power supply socket.

If liquid is spilled inside the unit, disconnect it from the power supply and have it checked by a competent

person.

It is the user's responsibility to carry out appropriate decontamination if hazardous material is spilt on or

inside the equipment.

Do not use tubes with a larger diameter than that of the vortexer cap (20mm);

Do not start vortexing at maximum speed;

Do not touch the vortexing cup during operation.

Place unit on a solid work surface or laboratory bench.

Clean the unit only with a damp cloth, do not use chemical cleaning agents.

Before using any cleaning or decontamination method except those recommended by the manufacturer,

user should check with the manufacturer that the proposed method will not damage the equipment.

N2400300,Feb 2007, Rev. 0

Page 3

270100

Operating Instructions

2. General Information

2.1 Introduction

The Boekel

Tap Dancer

is designed for mixing substances in tubes using an eccentric

mechanism. The

Tap Dancer

can be used in a variety of applications including general

test tube mixing, tissue samples mixing, cell suspensions vortexing, chemical reagents

mixing, etc.

2.2 Description

This unit is equipped with 20 mm diameter single Polystyrol vortexing cup for using one

tube at a time and is intended for two operations:

•Continuous Vortexing

•Intermittent Vortexing

The intermittent operation is activated by touching the mixing cup with a test tube and

operates at variable speeds from gentle shaking to vigorous vortexing. To operate the

continuous operation simply push the switch down to the continuous option.

N2400300, Feb 2007, Rev.0

Page 4

270100

Operating Instructions

3. Operating Instructions

The

Tap Dancer

is simple to operate.

3.1 Continuous vortexing mode.

Push switch (2) into position .

Set a desired level of mixing using the speed control (3);

Control the intensity of vortexing by varying the pressure of a tube in the

Polystyrolcup (1).

3.2 Intermittent vortexing mode - Touch operation.

Push switch (2) into position.

Vortexer will be activated when touching the vortexing cup with a test tube;

Set a desired level of vortexing using the speed control (3);

Control the intensity by varying the pressure of a tube in the Polystyrol cup (1).

N 2400300,Feb 2007, Rev 0

Page 5

Label1

270100

Operating Instructions

4. Specifications

4. Standard Specifications

• Rotation speed ......……………………………........250-6000 RPM.

• Time of acceleration …………………………..........3 sec.

• Maximum tube diameter .......................................20mm

• Ambient temperature range ..................................+4° to 45°C

• Dimensions..........……………………………...........5 in. x 5.75 in. x 3.0 in.

• Power..................…………………………..............12V, 500mA

• Weight (with power supply) ………………….........2.0 lb

N2400300, Feb 2007, Rev. 0

Page 6

270100

Operating Instructions

5. Warranty and Service

5.1 Warranty

When used in laboratory conditions and according to these operating instructions Boekel

warrants this product to be free of defective material and workmanship for a period of

two years from the date of shipment. The liability of Boekel for any defective equipment

during the warranty period shall be limited to the repair of such equipment or

replacement thereof without charge for parts or labor.

5.2 Service

A Returned Material Authorization (RMA) number is required before any Boekel products are returned

for any reason. Contact Boekel Customer Service at 1-800-336-6929 ext. 5. A Decontamination

Certificate must be completed, signed by the user, and returned to Boekel Scientific prior to receiving

the RMA number. Please be sure to mark the outside of the returned goods package with this RMA

number to ensure prompt handling.

Boekel Scientific

855 Pennsylvania Blvd.

Feasterville, PA 19053

PHONE: (215) 396-8200 or (800) 336-6929 Ext. 5

FAX: (215) 396-8264

E-mail: boekel-[email protected]om

N2400300,Feb2007, Rev . 0

Page 7

270100

Operating Instructions

Tabla de contenidos

Otros manuales de Equipo de laboratorio de Boekel

Boekel

Boekel FLASK DANCER Manual de usuario

Boekel

Boekel Bambino 230301 Manual de usuario

Boekel

Boekel InSlide Out 241000 Manual de usuario

Boekel

Boekel DASH Flex 24 Manual de usuario

Boekel

Boekel 302000 Manual de usuario

Boekel

Boekel 642E Manual de usuario

Boekel

Boekel UV CROSSLINKER Manual de usuario

Boekel

Boekel Slide Moat 240000 Manual de usuario

Boekel

Boekel RapidFISH 240200 Manual de usuario

Boekel

Boekel Rocker II Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario