Body Break 16116828 Manual de usuario

MAGNE

IC RECUMBENT

CYCLE

OWNER’S MANUAL

MODEL NO.

16116828

zAssembly

zOperation

zTrouble –Shooting

zParts

zWarranty

CAUTION:

You must read and

understand this owner’s

manual before operating

unit.

RETAIN FOR

FUTUREREFERENCE

MAURICE PINCOFFS CANADAINC. 6050 DON MURIE STREET, NIAGARA FALLS, ONTARIO

L2E 6X8

MANUFACTURE’S ONE-YEAR LIMITED WARRANTY

Your BODY BREAK cycle is warranted for one year from the date of purchase against

defects in material, when used for the purpose intended, under normal conditions, and

provided is receives proper care. Any part found defective or missing will be sent at

no cost when returned in accordance with the terms of this warranty.

This warranty is not transferable and is extended only to the original owner.

The warranty shall not apply to exercise cycles units which are (1) used for commercial

or other income producing purposes, or (2) subject to misuse, neglect, accident or

unauthorized repairs and alterations.

This warranty provided herein is in lieu of all other express warranties. Any implied

warranties, including any implied warranties of merchantability or fitness for particular

purpose, are limited in duration to the first 12 months from the date of purchase. All other

obligations or liabilities, including liability for consequential damages, are hereby excluded.

REPAIR PARTS AND SERVICE

All of the parts for the exercise cycle, shown in figure can be ordered from Maurice Pincoffs

Canada Inc. 6050 DON MURIE STREET, NIAGARA FALLS, ONTARIO L2E 6X8. When

ordering parts, the parts will be sent and billed at the current prices. Prices may be subject

to change without notice. Check or money order must accompany all orders. Standard

hardware items are available at your local hardware store.

To ensure prompt and correct handling of any errors, or to answer any questions, please

call our Toll Free number: 1-888-707-1880, or local number 1-905-353-8955 or fax

1-905-353-8968 or email customerservice@pincoffs.ca Office hours are from 8:30 AM to

5:00 PM Monday to Friday Eastern Standard Time.

Always include the following information when ordering parts

zModel Number

zName of Each Part

zPart Number of Each Part

TABLE OF CONTENTS

WARRANTY 1 COMPUTER 9

SAFETY PRECAUTIONS 2 PARTS LIST & DIAGRAM 10-13

PRE-ASSEMBLY CHECK LIST 3 TROUBLE SHOOTING GUIDE 14

PARTS BAG PACKING LIST 4 TRAINING GUIDELINES 15-19

ASSEMBLY INSTRUCTION 5-8

SAFETY PRECAUTIONS

Thank you for purchasing our product. Even though we go to great efforts to ensure the

quality of each product we produce, occasional errors and /or omissions do occur. In any

event should you find this product to have either a defective or a missing part please

This product has been designed for home use only. Product liability and guarantee

conditions will not be applicable to products being subjected to professional use or products

being used in a gym center.

This exercise equipment was designed and built for optimum safety. However, certain

precautions apply whenever you operate a piece of exercise equipment. Be sure to read

the entire manual before assembly and operation of this machine. Also, please note the

following safety precautions:

1. Read the OWNER’S OPERATING MANUAL and all accompanying literature and

follow it carefully before using your cycle.

2. If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced while

using this equipment, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

3. Inspect your exercise equipment prior to exercising to ensure that all nuts and bolts are fully

tightened before each use.

4. The cycle must be regularly checked for signs of wear and damage. Any part found defective,

must be replaced with a new part from the manufacturer.

5. Fitness equipment must always be installed on a flat surface, do not place the unit on a loose

rug or uneven surface. It is recommended to use an equipment mat to prevent the unit from

moving while it is being used, which could possibly scratch or damage the surface of your floor.

6. No changes must be made which might compromise the safety of the equipment.

7. Keep children and pets away from this equipment at all times while exercising.

8. It is recommended to have a minimum of 2’ safe clearance around the exercise equipment

while in use.

9. Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward.

This allows your heart rate to gradually increase and decrease and will help prevent you

from straining muscles.

10. Never hold your breath while exercising. Breathing should remain at a normal rate in

conjunction with the level of exercise being performed

11. Always wear suitable clothing and footwear while exercising. Do not wear loose fitting

clothing that could become entangled with the moving parts of your cycle.

12. Care must be taken when lifting or moving the equipment, so as not to injure your back.

Always use proper lifting techniques.

13. User weight should not exceed 250 lbs.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM CONSULT YOUR PHYSICIAN. THIS

IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH

PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS

EQUIPMENT. WE ASSUME NO RESPONSILITY FOR PEROSNAL INJURY OR PROPERTY DAMAGE

SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

PRE-ASSEMBLYCHECKLIST

PARTNO. DESCRIPTION QTY

1 / 2 Front frame and rear frame

4 / 11 Front stabilizer w/ transportation wheels

5 / 10 Rear stabilizer w/ adjustable caps

3/66 Handlebar w/ hand pulse

8Backcushionw/4bolts

9Seat w/ 4 bolts

6Back cushion support tube w/ 4 bolts and 4 washers

12 Computerw/4screws

Inner box

PARTS BAG PACKING LIST

PART DESCRIPTION Q’TY SKETCH SKETCH

56 CARRIAGE BOLT M8*75mm 4

57 CURVE WASHER 6 56 57

58 SPRING WASHER 6

59 CAP NUT M8 6 58 59

43 CARRIAGE BOLT M8*45mm 2

16R RIGHT PEDAL 1 43

16R

16L LEFT PEDAL 1

65L LEFT PEDAL STRAP 1 16L 65L

65R RIGHT PEDAL STRAP 1

77 ALLEN WRENCH 1 65R 77

78 UNIVERSAL WRENCH 1

24 STOPPER 1

78 24

37 MONITOR SUPPORT TUBE 1

NOTE:

Above described parts are all the parts you need to assemble this machine. Before you

start to assemble, please check the hardware packing to make sure they are included.

ASSEMBLY INSTRUCTION

This manual is designed to help you easily assemble, adjust and use this machine. Please read

this manual carefully. For the sake of familiarizing yourself with the parts identified in the instruction,

first study the overview drawing.

Set all parts in a clear area on the floor and remove the packing material. Refer to the parts list for

help to identify the parts.

It will take two people to assemble your unit.

STEP 1. ATTACHING THE STABILIZERS

Attach the front stabilizer (4) with two transportation wheels (11) to the front frame (2),

using two carriage bolts (56), two curve washers (57), two spring washers (58) and two

cap nuts (59).

Attach the rear stabilizer (5) with two leveling caps (10) to the rear frame (1), using two

carriage bolts (56), two curve washers (57), two spring washers (58) and two cap nuts (59).

Attach the one stopper (24) to front frame (2) and tighten well.

NOTE: Ensure the bolts are fastened securely to avoid injuries. If the unit is wobbly use the leveling

cap on the rear stabilizer to level the unit.

STEP 2. ATTACHING THE HANDLEBAR

Attach the handlebar (3) to the welded bracket of the rear frame (1). Secure using two carriage

bolts (43) and two curve washers (57) , two spring washers (58) and two cap nuts (59).

Connect the tension/pulse wire (68) into the extension tension/pulse wire (69).

Remove the seat adjustment knob (21) and slide the rear frame (1) to your desired location and

secure with the seat adjustment knob (21).

NOTE: 1.Ensure the bolts are fastened securely to avoid injuries. It may be necessary to adjust the

stopper (24) to level your unit.

2. The tension control is found at the ends of the handlebar.To increase the tension press the

UP button, to decrease the tension press the DOWN button.

STEP 3. ATTACHING THE SEAT AND BACK CUSHION

Remove the four allen head bolts (27), 4 flat washers (20) which are pre-assembled on the

backrest support tube (6).

Insert the backrest support tube (6) into the rear frame (1). Secure using four allen head bolts

(27), four flat washers (20).

Attach the seat (9) to the seat support tube of the rear frame (1). Align the four holes and fasten

with four cross head bolts (51) found underneath the seat.

Attach the back cushion (8) to the backrest support tube (6). Align the four holes and fasten

with four cross head bolts (51) found underneath the back cushion.

NOTE: Ensure the bolts are fastened securely to avoid injuries.

STEP 4. ATTACHING THE HANDLEBAR POST

Insert two “AA” batteries into the back of the computer (12).

Slide the wires from the computer (12) down through the computer support tube (37).

Attach the computer (12) to the computer support tube (37). Secure using four screws (75).

Connect the upper tension/pulse wire (70) to the wire from the computer (12).

Connect the middle cable (62) to the wire from the computer (12).

Attach the computer support tube (37) to the bracket of the front frame (2). Secure using one

allen head bolt (27), one curve washer (57) and one spring washer (58).

Note: Ensure that the wires are safety tucked into the computer support tube to avoid

pinching the wires.

STEP 5. ATTACHING THE PEDAL

Attach the pedal straps (65R/L) to the pedals (16R/16L).

Attach the right and left pedals (16R/16L) to the crank arm (17).

NOTE: The end with the adjustable holes must be set outwards. The pedals and crank arms are

marked with R & L. The right pedal should be threaded on clockwise and the left should be threaded

counter-clockwise.

You have completed the assembly of your unit.

MONITOR INSTRUCTION

Function button

MODE: Press mode button to select the desired function

Press mode button for three seconds to reset all values to zero

Function

Scan: Displays each function in sequence every 4 seconds. The display

loop is time, speed, distance, calories and pulse.

Time: Displays your elapsed workout time up to 99:59

Speed: Displays the current speed up to 99.9 KM per hour.

Distance: Displays the cumulative distance traveled during your workout up to

99.9KM

Calorie Displays the cumulative calories burned at any given time during your

workout up to 999 cal.

NOTE: This data is a rough guide used for comparison of different

exercise sessions, which cannot be used for medical purposes.

Gripped pulse The monitor will display the user’s current heart rate in beats per

minute during the workout. Both hands must hold the gripped pulse

for a heart rate reading during your workout.

NOTE: This data is a rough guide used for comparison of different

exercise sessions, which cannot be used for medical purposes

Remarks:

1. The monitor will turn on automatically by pressing any key or starting your exercise

program.

2. The monitor will shut off automatically if no signal is detected for four minutes and

keep all function values. You may press any key or start the exercise program to

have the monitor resume.

3. If monitor is illegible or partial segments appear, remove batteries and re-install.

4. Monitor requires 2 “AA” batteries.

5. The tension control is found at the end of the handlebar.

Tabla de contenidos

Otros manuales de Bicicleta estática de Body Break

Body Break

Body Break 16116699 Manual de usuario

Body Break

Body Break 16116390-1 Manual de usuario

Body Break

Body Break 16116737 Manual de usuario

Body Break

Body Break 16116901 Manual de usuario

Body Break

Body Break 16116865-1 Manual de usuario

Body Break

Body Break 16116718 Manual de usuario

Body Break

Body Break 16116807 Manual de usuario

Body Break

Body Break 16116718 Manual de usuario

Body Break

Body Break 16116837 Manual de usuario

Manuales populares de Bicicleta estática de otras marcas

Weslo

Weslo Vector 302 Guía de inicio rápido

TOORX

TOORX BRX85 Manual de usuario

Matrix

Matrix KranKcycle Manual de usuario

Matrix

Matrix IC3 Manual de usuario

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Manual de usuario

Monark

Monark 827E Manual de usuario

Stamina

Stamina 1310 Manual de usuario

American Fitness

American Fitness SPR-BK1072A Manual de usuario

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Manual de usuario

BH FITNESS

BH FITNESS H9158H Manual del operador

Body Sculpture

Body Sculpture BC-7220G Manual de usuario

Cateye

Cateye EC-2300 Manual de usuario

FYTTER

FYTTER RACER RC MSR Manual de usuario

Kikos

Kikos HM-9090M Manual de usuario

Pro-Form

Pro-Form 345 Zlx Bike Guía del usuario

Fuel Fitness

Fuel Fitness SU135-40 Manual de usuario

NordicTrack

NordicTrack Gxr 4.2 Bike Manual de usuario

Vision Fitness

Vision Fitness U70 Manual de usuario