Bodor BCL-B Series Manual de usuario
User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd www.bodorcnc.com
1
Laser Engraving Cutting Machine
BCL-B User Manual
Jinan Bodor CNC Machine Co.,Ltd
Email: [email protected]
Foreign Sales Hot-line：+86-531-88690051
Address: Huaya Industrial Park 1881 in Kanghong Road, High-Tech Zone of Jinan,
Shandong, China
Zip Code：250101
Website：www.bodorcnc.com
User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd www.bodorcnc.com
2
Brief Introduction of Laser Engraving Cutting Machine..................................................... 5
I Safety Knowledge.....................................................................................................5
1.1 Basic Information.........................................................................................5
1.2 Optical Security........................................................................................... 5
1.3 Electricity Security.......................................................................................5
II Equipment Brief Introduction...............................................................................6
2.1 Instruction of Machine Model & Nameplate............................................... 6
2.2 Equipment Composition.............................................................................. 7
2.2.1 Composition of whole set machine................................................. 7
2.2.1.1 Machine Body..................................................................... 8
2.2.1.2 Drive System....................................................................... 9
2.2.1.3 Optical System.................................................................. 10
2.2.1.4 Control System..................................................................12
2.2.1.5 Peripheral Instruments.......................................................15
2.2.1.6 Tool Box............................................................................ 15
2.2.1.7 Equipment Socket............................................................. 17
III Machine Installation.............................................................................................17
3.1 Before Installation......................................................................................17
3.1.1 Preparation of area.........................................................................17
3.1.2 Preparation of operator.................................................................. 18
3.1.3 Preparation of tools........................................................................18
3.1.4 Other preparation...........................................................................18
3.2 Installation Steps...............................................................................18
3.2.1 Package of laser tube.................................................................. 18
3.2.2 Installation of Laser Tube.............................................................. 19
3.2.3 Installation of Water Chiller.......................................................... 20
3.3 Ground Line Connection............................................................................22
IV Light Path Adjustment......................................................................................... 23
4.1 Examination before adjustment................................................................. 23
4.1.1 Orders for Power-on/off................................................................ 23
4.1.2 Electrical Commissioning..............................................................23
4.2 Laser Adjustment....................................................................................... 23
4.2.1 Adjustment of Laser work............................................................. 23
4.2.2 Adjust laser Path............................................................................ 24
4.2.3 Testing of Engraving......................................................................30
V General Operation User Manual............................................................................30
5.1 Installing Software..................................................................................... 30
5.2 Instructions for machine using...................................................................32
5.2.3 Setting processing method.............................................................40
5.2.4 Download file................................................................................ 40
5.2.5 Machine operation......................................................................... 41
5.3 U disk operation.........................................................................................44
VI Equipment's maintenance..................................................................................47
VII CO2 glass laser tube's precautions for use..........................................................49
User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd www.bodorcnc.com
3
Preface
Thank you very much for your trust and purchasing our Products. We can
provide perfect after-sale service and solutions. Please keep this manual and
other attachments carefully, in order to guarantee the equipment’s safe
running.
This manual is only applied to our company’s standard machines. With
regard to special customized machines, please read other reference material
carefully.
This manual is written to demonstrate the issues about working principle,
installation, operation, failure removal, transport,storage, maintenance etc.
Please read the manual carefully, if you use the equipment the first time.
For quick and efficient using this equipment, the user should have
qualifications as below:
1. The user needs to know basic computer professional knowledge, and can
operate related editing and drawing software, such as Coreldraw, Photoshop,
Autocad and so on.
2. The user should have basic optical knowledge and related
electromechanical device's maintenance knowledge.
3. Before starting the equipment, make sure this equipment's operation
procedure is known well and operate accordingly.
Because equipments are continuously updating, there may be some
difference between your equipments and equipments shown in the manual in
User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd www.bodorcnc.com
5
Brief Introduction of Laser Engraving Cutting Machine
I Safety Knowledge
1.1 Basic Information
Make sure that the operator is being trained before operating the machine.
Operator must be aside the machine during machine working. Never leave the
machine alone in case to cause unnecessary loss.
1.2 Optical Security
Our laser equipment adopts the fourth laser tube. Length of laser beam is 10.6μm. During
machine working, we recommend relevant people to wear authorized laser safety goggles.
Do not stare at the laser beam or anything beam reflected even when wearing laser safety
goggles.
1.3 Electricity Security
Before connecting electricity, please check carefully the requirements on the
equipment's name plate, such as power,working voltage and so on.
Without our permission, please don't dismantle electrical apparatus elements on the
equipment, especially do not touch laser power and laser tube during machine
working. Because the equipment has fatal voltage when working, and danger can still
exist after disconnecting electricity.
1 Harm
Various potentially dangerous substance can be eliminated through ventilation system
during plastic material cutting. If smog or smell is too heavy, gas mask is needed.
2 Other Harm
Out of security consideration, equipment modification is forbidden without the
permission from the Manufacturer.
User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd www.bodorcnc.com
6
II Equipment Brief Introduction
2.1 Instruction of Machine Model & Nameplate
1.Model Instruction
※※※一※※※※一※※
Picture 1-1: Model Illustration
For example, BCL1309XU means standard serial laser cutting machines with 1300mm x
900mm and up-down working table.
Nameplate Illustration:
Machine Serial
BCL:
Bodor Cutting Laser
BML：
Bodor Marking Laser
Machine Working Area：
0503: 500mm×300mm
0605：600mm ×500mm
1006：1000mm×600mm
1309: 1300mm×900mm
1610: 1600mm×1000mm
… ……
Model Introduction：
M: Mini Machine Serial
X: Standard Machine Serial
B: Bed Machine Serial
FB: Fiber Laser Cutting
Machine Serial
YB/YT: High Power Metal
Cutting Machine Serial
FP/BM: Fiber Laser Marking
Machine Serial
Other Attachments:
U- with up-down working
table
F- automatic focus/fiber
generator
H- high speed guid rail
V- vac-sorb
A- auto feed
CCD- automatic logo
positioning cutting machine
P- separable style stone
engraving machine
S- screw machine
R-RF tube
G-glass engraving machine
D-die board cutting machine
User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd www.bodorcnc.com
7
The vertical motor of this equipment is installed in the middle of the transmission shaft,
which can make speedy and stable cutting and engraving.
The nameplate is fixed in the right-back side. You can read the relevant information on it.
It is not accepted for anybody to change or remove this nameplate.
2.2 Equipment Composition
Due to different models or new updates in products, there may be some difference in
appearance or some partial detail. Specific equipment is subject to final product.
2.2.1 Composition of whole set machine
A.Machine Body
B.Drive System
C.Optical System
D.Control System
E.Peripheral Parts
F. Tool Box
This number is only for each machine
User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd www.bodorcnc.com
8
Laser
Machine
Machine
Body
Drive
System
Optical
System
Control
System
Peripheral
Parts
Tool
Box
2.2.1.1 Machine Body
front
gantry
blade
side door
front door
User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd www.bodorcnc.com
9
2.2.1.2 Drive System
Y Axis:
X Axis:
foot margin
universal wheel
guide rail
sliding block
Y axis belt
clean wheel,axle,
seat,bearing
24 tooth synchronizing
gantry support seat
User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd www.bodorcnc.com
10
2.2.1.3 Optical System
Attention:
When installing the laser tube, it should be taken slightly. High tension cable and cathode
must be fixed enough. Water inlet of the laser tube should be in the lower place, and water
outlet be in the higher, so there won't be any bubble. The laser tube socket should be
installed with even strength which can just make the tube secure. Do not overexert, it may
crush the laser tube.
X guide rail
X sliding block
X belt
X motor
pinion stand
laser head
ring belt
laser tube socket
Y transmission motor
Otros manuales para BCL-B Series
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Impresora de Bodor
