Bobrick B-828 Guía de configuración

Advisory Bulletin

TB-99 Cleaning and Maintenance For

Bobrick B-828 Automatic Counter-Mounted

Soap Dispenser

B-828

Quality soap dispensers require good quality soap and periodic maintenance to properly operate. For reliable

long-term use, perform regular maintenance for each unit. Most soap dispenser problems are caused by soap

that is too thick or corrosive, or by a lack of maintenance. If proper soap is being used, problems can still arise if

dispensers have never been cleaned. Bobrick recommends a viscosity of 100cps. With proper maintenance and

soap, Bobrick dispensers will provide long term, trouble free operation.

Warning: Only use soap designed speciﬁcally for foaming on the B-828 foam dispenser. Not doing so will result in

unit not operating properly, or can lead to total product failure.

Determine which unit you have:

DO NOT use abrasive or chemical cleaners (including chlorine bleach) to clean Spout, as it may dull the luster and attack the

chrome-plated exterior. Use ONLY mild soap and water, then wipe dry with clean cloth. While cleaning the bathroom counter top,

protect the Spout from any splattering of cleaner. Acids and cleaning ﬂuids will discolor or remove chrome plating.

Stem Mixer

Housing

Air Tube

Soap Tube

Air Tube

Adapter

Revised 5/2/19

Deactivate the soap dispenser by placing your ﬁnger over the Fiber Optic Sensor area while you clean. The

sensor is located just behind the Nozzle Tip. Once dispenser is cleaned, remove ﬁnger from the sensor area. Or

un-plug the Power Supply located on the bottom of the housing (LED will not light).

Daily cleaning:

• Using a soft, dry cloth wipe the exterior.

• If dispenser is really dirty gently wipe the dispenser with a cloth moistened with warm water and a

diluted neutral detergent. Remove the detergent with a soft damp cloth and then rub with a second soft,

dry cloth.

Monthly cleaning

• Remove Nozzle Tip and run under warm water.

• To remove Nozzle Tip for cleaning, cover the Sensor area with your ﬁnger to prevent dispensing of

soap. Turn Nozzle to the left to loosen. Rinse Nozzle under hot water to loosen any soap residue and

replace. Turn Nozzle to the right to tighten

• Place hand under Nozzle Tip to be sure soap is properly dispensed

Periodic cleaning (3 to 6 months)

• Gently wipe the dispenser with a cloth moistened with warm water and a diluted neutral detergent

• Clean area between Lid and Spout to keep Lid swing free of soap residue

• Flush the system when minimal amount of soap is left in the bottle

• Open the top-ﬁll door using the BobKey, rotate door clockwise

• Fill the dispenser with warm water.

• Press the Automatic Flush Button located on the bottom housing assembly, just above the Partition

Control Knob.

• Once unit is ﬂushed, Press the Automatic Flush Button again to stop dispensing.

• Fill unit with fresh soap.

• Place hand under Nozzle Tip to be sure soap is properly dispensed.

Nozzle Tip

Fiber Optic

Sensor

Nozzle Tip

Removable

Mesh Screen

Turn nozzle

to left to

loosen

Automatic

System

Flush

Button

TB-99 Revised 5/2/19

Tabla de contenidos

Otros manuales de Dispensador de Bobrick

Bobrick

Bobrick Classic Series Manual de usuario

Bobrick

Bobrick ClassicSeries B-2111 Manual de operación y mantenimiento

Bobrick

Bobrick 8221 Manual de operación y mantenimiento

Bobrick

Bobrick 8221 Manual de operación y mantenimiento

Bobrick

Bobrick B-72974 Guía

Bobrick

Bobrick Designer B-840 Manual de usuario

Bobrick

Bobrick SureFlo B-8281 Manual de programación

Bobrick

Bobrick B-850 Manual de usuario

Bobrick

Bobrick SureFlo B-8281 Manual de usuario

Bobrick

Bobrick B-38030 Manual de operación y mantenimiento

Bobrick

Bobrick B-824 Manual de instrucciones

Bobrick

Bobrick B-822 Series Manual de operación y mantenimiento

Bobrick

Bobrick B-828 Manual de usuario

Bobrick

Bobrick Contura Series Manual de operación y mantenimiento

Bobrick

Bobrick ConturaSeries B-4063 Manual de operación y mantenimiento

Bobrick

Bobrick B-3942 Manual de usuario

Bobrick

Bobrick B-5050 Manual de operación y mantenimiento

Bobrick

Bobrick B-132 Guía

Bobrick

Bobrick Designer Series Manual de programación

Bobrick

Bobrick 82216 Manual de operación y mantenimiento

Bobrick

Bobrick B-850 Guía de configuración

Bobrick

Bobrick B-820-258 Manual de programación

Bobrick

Bobrick B-828 Guía

Bobrick

Bobrick B-922 Manual de instrucciones

Manuales populares de Dispensador de otras marcas

Silver King

Silver King Majestic SK12MAJ Guía de inicio rápido

Franke

Franke F3Dn Twin Manual de usuario

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Manual de usuario

DAN DRYER

DAN DRYER 282 Manual de usuario

Essity

Essity Tork 473208 Manual de usuario

CBS

CBS SD300BU-88 Guía de configuración

Sealey

Sealey MK77 Manual de usuario

Fluid Management

Fluid Management Accutinter 1600 Manual de usuario

Franke

Franke DVS SD99-010 Manual de usuario

Graco

Graco Dispensit 1053-10C Guía de solución de problemas

ITALTINTO

ITALTINTO i50 Manual de usuario

Coca-Cola

Coca-Cola FREESTYLE 9000 Manual de usuario

Graco

Graco ProMix 2KE Manual de instrucciones

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 Manual de usuario

Wayne

Wayne GLOBAL VISTA CNG Manual de usuario

clarsen

clarsen H133 Manual de usuario

PicoBrew

PicoBrew Zymatic Manual de usuario

BOWMAN

BOWMAN BP-007 Manual de usuario