OMB11B_AU
tPlease save instructions for future use and
reference.
tFor safe operation, all users must read
and understand instructions and warnings
completely before use.
tThe BOB Infant Car Seat Adapter (ICSA)
is designed for use with BOB Strollers
equipped with Accessory Adapters and
compatible Infant Car Seats. This product is
not a universal adapter. Do not use with car
seat models other than those specifically
listed in the Infant Car Seat Compatibility
Chart on page 4.
tUsing this product with an Infant Car Seat
on incline or uneven terrain may cause
the stroller to become unstable and tip
resulting in serious injury. To reduce the
risk, always lock the front wheel in the fixed
position.
tAlways follow, and do not exceed, the
Infant Car Seat manufacturer’s instructions
for maximum load carrying capacity of the
Infant Car Seat.
tAvoid serious injury from falling or sliding
out. Always use Infant Car Seat harness.
tNever leave children unattended in the
stroller/Infant Car Seat.
tFor Duallie Strollers, the Canopy Catch is
intended to prevent the right canopy from
rotating and causing pinching and/or finger
injuries between canopy stays and Infant
Car Seat. Always secure right canopy stay in
Canopy Catch when using an Infant Car Seat
in Infant Car Seat Adapter.
tAlways keep your Infant Car Seat Carry
Handle locked in the vertical/carry position
while in stroller, as extra protection for your
child.
tAlways confirm Infant Car Seat Adapter is
properly locked in place in stroller Accessory
Adapters prior to use.
tAlways confirm Infant Car Seat is properly
locked in place on Infant Car Seat Adapter
prior to use.
tAlways secure the Infant Car Seat to the
Infant Car Seat Adapter with the supplied
Restraint Belt.
tDo not run or jog when using Infant Car Seat
Adapter with Infant Car Seat.
tDo not use off-road or on uneven terrain
when using the Infant Car Seat Adapter with
Infant Car Seat installed.
tRemove Infant Car Seat Adapter and
Restraint Belt when not in use.
tDo not place children directly in the stroller
seat with the Infant Car Seat Adapter
installed. Remove Infant Car Seat Adapter
from stroller prior to placing a child directly
into the stroller seat.
tRestraint Belt is intended for use with
combination of BOB Infant Car Seat Adapter
and compatible Infant Car Seats only. The
Restraint Belt must be removed prior to
using stroller without Infant Car Seat.
tDo not modify the Infant Car Seat Adapter
or remove any labels. Doing so voids the
warranty and could lead to a dangerous
condition.
tCare must be taken when attaching Infant
Car Seat to Infant Car Seat Adapter to
make sure hands and fingers are clear of
contacting surfaces.
tCare must be taken when folding and
unfolding the stroller to prevent finger
entrapment or injury.
tTo avoid injuries, never fold or unfold stroller
with other individuals within reach of stroller.
tPlastic bags can be dangerous. Keep plastic
bags and other packaging
away from children and infants.
FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH.
CONGRATULATIONS
Congratulations on your purchase
of the BOB®Infant Car Seat Adapter
(ICSA). It is designed to allow the
attachment of an Infant Car Seat to a
BOB stroller.
Please refer to chart on page 4 for
details of compatible ICSA models and
Infant Car Seats. Find your compatible
Infant Car Seat on the chart on page
4. Find key features of your ICSA on
Anatomy and follow instructions.
For updates to this manual, warranty
and other recent product notifications,
Please visit www.britaxbob.com.au
periodically or any time before making
approved changes or adding approved
equipment to your stroller.
WARNINGS
