Boardcon Idea6410 Manual de usuario
www.armdesigner.com
Idea6410
Single Board Computer
Hardware Reference Guide
IDEA6410 Hardware Reference Guide 1
www.armdesigner.com
IDEA6410 Hardware Reference Guide 2
1. Introduction
1.1. About this Manual
This manual is intended to provide the user with an overview of the board and benefits,
complete features specifications, and set up procedures. It contains important safety
information as well.
1.2. Feedback and Update to this Manual
To help our customers make the most of our products, we are continually making
additional and updated resources available on the Boardcon website
(www.armdesigner.com).
These include manuals, application notes, programming examples, and updated software
and hardware. Check in periodically to see what’s new!
When we are prioritizing work on these updated resources, feedback from customers is
the number one influence, If you have questions, comments, or concerns about your
product or project, please no hesitate to contact us at support@armdesigner.com.
1.3. Limited Warranty
Boardcon warrants this product to be free of defects in material and workmanship for a
period of one year from date of buy. During this warranty period Boardcon will repair or
replace the defective unit in accordance with the following process:
A copy of the original invoice must be included when returning the defective unit to
Boardcon. This limited warranty does not cover damages resulting from lighting or other
power surges, misuse, abuse, abnormal conditions of operation, or attempts to alter or
modify the function of the product.
This warranty is limited to the repair or replacement of the defective unit .In no event shall
Boardcon be liable or responsible for any loss or damages, including but not limited to any
lost profits, incidental or consequential damages, loss of business, or anticipatory profits
arising from the use or inability to use this products.
Repairs make after the expiration of the warranty period are subject to a repair charge and
the cost of return shipping. Please contact Boardcon to arrange for any repair service and
to obtain repair charge information.
www.armdesigner.com
IDEA6410 Hardware Reference Guide 3
1. OVERVIEW........................................................................................................................................4
1.1. HIGHLIGHTS ...................................................................................................................................4
1.2. IDEA6410 BLOCK DIAGRAM.........................................................................................................6
2. IDEA6410 POWER DESIGN...........................................................................................................7
2.1. POWER SUPPLY FOR IDEA6410......................................................................................................7
2.1.1. Power Supply ways............................................................................................................7
2.1.2 The Schematic drawing of power input............................................................................7
2.1.3. Voltage value on circuit dot...............................................................................................8
2.2. POWER ELECTRICAL CHARACTERISTICS AND POWER TIME SEQUENCE OF S3C6410........................9
2.3. IDEA6410 POWER SUPPLY BLOCK DIAGRAM...............................................................................11
2.4. BOOTLOADER STARTUP CONFIGURATION MODE............................................................................12
3. IDEA6410 HARDWARE DESIGN AND INTERFACES DESCRIPTION ................................14
3.1. NAND FLASH................................................................................................................................14
3.2. DDR RAM...................................................................................................................................15
3.3. NOR FLASH ..................................................................................................................................15
3.4. SERIAL INTERFACE .......................................................................................................................16
4. INTERFACE.....................................................................................................................................19
4.1. USB HOST....................................................................................................................................19
4.2. USB OTG....................................................................................................................................20
4.3. JTAG............................................................................................................................................20
4.4. SD CARD......................................................................................................................................22
4.5. CAMERA INTERFACES ...................................................................................................................22
4.6. TFT LCDAND TOUCH SCREEN INTERFACE ..................................................................................24
4.7. RESET KEY ...................................................................................................................................26
4.8.AUDIO INTERFACE ........................................................................................................................28
4.9. BUZZER........................................................................................................................................29
4.10. 100M ETHERNET INTERFACE......................................................................................................31
4.12. TVOUT INTERFACE....................................................................................................................33
4.11. HIGH SPEED SPI, MMC2AND I2C INTERFACE ...........................................................................33
4.12. USER BUTTONS AND LEDS.........................................................................................................34
4.13. GPIOAND ADC.........................................................................................................................35
4.14. RTC ...........................................................................................................................................37
4.15. 8X8MATRIX KEYBOARD............................................................................................................38
5. OPTIONAL MODULES..................................................................................................................40
5.1.WIFI MODULE .............................................................................................................................40
5.2. GPS MODULE...............................................................................................................................40
5.3. CAMERA MODULE........................................................................................................................40
5.4. 7INCH TFTLCD MODULE...........................................................................................................40
5.5. 4*4 MATRIX KEYBOARD AND USB_HUB MODULE.....................................................................41
www.armdesigner.com
IDEA6410 Hardware Reference Guide 4
1. Overview
The Idea6410 is a compact full-featured Embedded Single Board Computer(SBC) based
upon Samsung ARM11 S3C6410, designed specifically for Mobile Internet Device ,
Notebook, handheld / 3G mobile implementations. Its functional contents are similar to the
latest generation of Pocket PC's and smartphones, This computer allows easy embedded
application development through PC-Compatible tools and methods, while ensuring
in-field reliability and ruggedness for end-user systems.Idea6410 run without fans or heat
sinks in the temperature range of -20° to +70°C. Other chip-level features include 4
UARTs, SPI, I2C, a real-time clock with a separate power domain, and NAND Flash and
DDR memory controllers. These features make the devices particularly suitable for
automotive and industrial control applications as well as medical systems. In addition to
Windows Embedded CE 6.0 and Linux2.6 support,ready-to-run Android and Ubuntu are
available from Boardcon.
1.1. Highlights
.Rugged Single Board Computer(120mmx58mm) achieved through modern SMD
technology
. Improved interference safety achieved through multi-layer PCB technology and
dedicated ground pins
.Controller signals and ports extend to connectors aligning two sides of the board
.Four Ready-to-Run software package: WinCE6.0, Linux2.6.24, Android and Ubuntu
.Working temperature: -20°C to 70°C
.Processor: Samsung S3C6410, ARM1176JZF-S, up to 667MHz.
. Power supply: +12V
. 128MB Mobile DDR SDRAM, 133MHz, 32bit, Samsung K4X51163PC
.256MB NAND Flash, 8bit, Samsung K2F2G08
.2M Bytes NOR Flash, AMD AM29LV160DB
.SDIO WIFI Module, supporting IEEE802.11b/g
.LCD/Touch Screen interface. Supporting 3.5 inch TFT LCD, 4.3 inch TFT LCD and 7
inch TFT LCD.
. Many modules are available for your choice- GPS, WIFI, Camera, USB HUB+4x4
Matrix Keyboard.
. 24 GPIO, ADC, SPI,IIC and MMC connectors
. One audio input interface (3.5mm audio jack)
.One 2-channel audio output interface (3.5mm audio jack)
. One 100M Ethernet interface (RJ45)
.One USB2.0 Device port (Mini USB type interface)
www.armdesigner.com
IDEA6410 Hardware Reference Guide 5
.Four serial ports (Two are five-wire RS-232 DB9 interface, another two are three-wire
TTL serial port led out from a 20-pin expansion connector )
.SD/MMC interface (supports 3.3V and 1.8V logic voltage)
. Camera interface (10x2 pins header, supporting the mode of ITU-R 601/656 8bit)
. One 5x2 pins JTAG interface
. Seven buttons (Reset, Boot, User defined, On/Off)
.TVOUT
www.armdesigner.com
1.2. IDEA6410 Block Diagram
IDEA6410 Hardware Reference Guide 6
www.armdesigner.com
2. IDEA6410 Power design
2.1. Power Supply for IDEA6410
2.1.1. Power Supply ways
The IDEA6410 power design adopts distributed fabric, adopting absolute power chip to
power supply respective for S3C6410 and peripheral devices.
The main chip S3C6410 runs on frequency at 533MHz, the CPU board is supplying power
for CPU with 1.1V ARM Kernel power VDD_ARM, 1.3V PLL-VCC and startup power of the
chip internal logic power VDD_xPLL and VDD_INT ,1.2V startup power VDD_Alive, 1.8V
DDR memory VDD_MEM, 3.3V I/O and the other peripheral devices.
There are two ways for power supply for IDEA6410 Single Board Computer.
(1). Using Power Adapter through mini DC_IN connector J24 to send 12V/2A to the board
(2). Using Battery 5V/3A through connector J25 to power supply.
Below picture-2 shows the two connectors:
Picuture-2
2.1.2 The Schematic drawing of power input
IDEA6410 Hardware Reference Guide 7
www.armdesigner.com
Below picture-3 shows the schematic drawing.
Picture-3
2.1.3. Voltage value on circuit dot
. VDD_5V: 5V,
VDD_IO: 3.3V
VDD_OTG: 3.3V
VDD_OTGI: 1.2V
VDD_Alive: 1.2V
VDD_INT: 1.3V
VDD_ARM: 1.2V
VDD_RTC: 3V
VDD_ADC: 3.3V
VDD_MDDR: 1.8V
VDD_AC97:3.3V
VDD_WIFI: 3.3V
IDEA6410 Hardware Reference Guide 8
www.armdesigner.com
2.2. Power electrical characteristics and power time sequence of S3C6410
IDEA6410 Hardware Reference Guide 9
www.armdesigner.com
IDEA6410 Hardware Reference Guide 10
Tabla de contenidos
Otros manuales de Placa madre de Boardcon
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
